5,617 research outputs found
Soil erosion in the Alps : causes and risk assessment
The issue of soil erosion in the Alps has long been neglected due to the low economic value of the agricultural land. However, soil stability is a key parameter which affects ecosystem services like slope stability, water budgets (drinking water reservoirs as well as flood prevention), vegetation productivity, ecosystem biodiversity and nutrient production. In alpine regions, spatial estimates on soil erosion are difficult to derive because the highly heterogeneous biogeophysical structure impedes measurement of soil erosion and the applicability of soil erosion models. However, remote sensing and geographic information system (GIS) methods allow for spatial estimation of soil erosion by direct detection of erosion features and supply of input data for soil erosion models.
Thus, the main objective of this work is to address the problem of soil erosion risk assessment in the Alps on catchment scale with remote sensing and GIS tools. Regarding soil erosion processes the focus is on soil erosion by water (here sheet erosion) and gravity (here landslides). For these two processes we address i) the monitoring and mapping of the erosion features and related causal factors ii) soil erosion risk assessment with special emphasis on iii) the validation of existing models for alpine areas. All investigations were accomplished in the Urseren Valley (Central Swiss Alps) where the valley slopes are dramatically affected by sheet erosion and landslides.
For landslides, a natural susceptibility of the catchment has been indicated by bivariate and multivariate statistical analysis. Geology, slope and stream density are the most significant static landslide causal factors. Static factors are here defined as factors that do not change their attributes during the considered time span of the study (45 years), e.g. geology, stream network.
The occurrence of landslides might be significantly increased by the combined effects of global climate and land use change. Thus, our hypothesis is that more recent changes in land use and climate affected the spatial and temporal occurrence of landslides. The increase of the landslide area of 92% within 45 years in the study site confirmed our hypothesis. In order to identify the cause for the trend in landslide occurrence time-series of landslide causal factors were analysed. The analysis revealed increasing trends in the frequency and intensity of extreme rainfall events and stocking of pasture animals. These developments presumably enhanced landslide hazard. Moreover, changes in land-cover and land use were shown to have affected landslide occurrence. For instance, abandoned areas and areas with recently emerging shrub vegetation show very low landslide densities. Detailed spatial analysis of the land use with GIS and interviews with farmers confirmed the strong influence of the land use management practises on slope stability. The definite identification and quantification of the impact of these non-stationary landslide causal factors (dynamic factors) on the landslide trend was not possible due to the simultaneous change of several factors.
The consideration of dynamic factors in statistical landslide susceptibility assessments is still unsolved. The latter may lead to erroneous model predictions, especially in times of dramatic environmental change. Thus, we evaluated the effect of dynamic landslide causal factors on the validity of landslide susceptibility maps for spatial and temporal predictions. For this purpose, a logistic regression model based on data of the year 2000 was set up. The resulting landslide susceptibility map was valid for spatial predictions. However, the model failed to predict the landslides that occurred in a subsequent event. In order to handle this weakness of statistic landslide modelling a multitemporal approach was developed. It is based on establishing logistic regression models for two points in time (here 1959 and 2000). Both models could correctly classify >70% of the independent spatial validation dataset. By subtracting the 1959 susceptibility map from the 2000 susceptibility map a deviation susceptibility map was obtained. Our interpretation was that these susceptibility deviations indicate the effect of dynamic causal factors on the landslide probability. The deviation map explained 85% of new independent landslides occurring after 2000. Thus, we believe it to be a suitable tool to add a time element to a susceptibility map pointing to areas with changing susceptibility due to recently changing environmental conditions or human interactions.
In contrast to landslides that are a direct threat to buildings and infrastructure, sheet erosion attracts less attention because it is often an unseen process. Nonetheless, sheet erosion may account for a major proportion of soil loss. Soil loss by sheet erosion is related to high spatial variability, however, in contrast to arable fields for alpine grasslands erosion damages are long lasting and visible over longer time periods. A crucial erosion triggering parameter that can be derived from satellite imagery is fractional vegetation cover (FVC). Measurements of the radiogenic isotope Cs-137, which is a common tracer for soil erosion, confirm the importance of FVC for soil erosion yield in alpine areas. Linear spectral unmixing (LSU), mixture tuned matched filtering (MTMF) and the spectral index NDVI are applied for estimating fractional abundance of vegetation and bare soil. To account for the small scale heterogeneity of the alpine landscape very high resolved multispectral QuickBird imagery is used. The performance of LSU and MTMF for estimating percent vegetation cover is good (r²=0.85, r²=0.71 respectively). A poorer performance is achieved for bare soil (r²=0.28, r²=0.39 respectively) because compared to vegetation, bare soil has a less characteristic spectral signature in the wavelength domain detected by the QuickBird sensor.
Apart from monitoring erosion controlling factors, quantification of soil erosion by applying soil erosion risk models is done. The performance of the two established models Universal Soil Loss Equation (USLE) and Pan-European Soil Erosion Risk Assessment (PESERA) for their suitability to model erosion for mountain environments is tested. Cs-137 is used to verify the resulting erosion rates from USLE and PESERA. PESERA yields no correlation to measured Cs-137 long term erosion rates and shows lower sensitivity to FVC. Thus, USLE is used to model the entire study site. The LSU-derived FVC map is used to adapt the C factor of the USLE. Compared to the low erosion rates computed with the former available low resolution dataset (1:25000) the satellite supported USLE map shows “hotspots” of soil erosion of up to 16 t ha-1 a-1. In general, Cs-137 in combination with the USLE is a very suitable method to assess soil erosion for larger areas, as both give estimates on long-term soil erosion.
Especially for inaccessible alpine areas, GIS and remote sensing proved to be powerful tools that can be used for repetitive measurements of erosion features and causal factors. In times of global change it is of crucial importance to account for temporal developments. However, the evaluation of the applied soil erosion risk models revealed that the implementation of temporal aspects, such as varying climate, land use and vegetation cover is still insufficient. Thus, the proposed validation strategies (spatial, temporal and via Cs-137) are essential. Further case studies in alpine regions are needed to test the methods elaborated for the Urseren Valley. However, the presented approaches are promising with respect to improve the monitoring and identification of soil erosion risk areas in alpine regions
Understanding the optical responses of leaf nitrogen in Mediterranean Holm oak (Quercus ilex) using field spectroscopy
The direct estimation of nitrogen (N) in fresh vegetation is challenging due to its weak influence on leaf reflectance and the overlaps with absorption features of other compounds. Different empirical models relate in this work leaf nitrogen concentration ([N]Leaf) on Holm oak to leaf reflectance as well as derived spectral indices such as normalized difference indices (NDIs), the three bands indices (TBIs) and indices previously used to predict leaf N and chlorophyll. The models were calibrated and assessed their accuracy, robustness and the strength of relationship when other biochemicals were considered. Red edge was the spectral region most strongly correlated with [N]Leaf, whereas most of the published spectral indexes did not provide accurate estimations. NDIs and TBIs based models could achieve robust and acceptable accuracies (TBI1310,1720,730: R2 = 0.76, [0.64,0.86]; RMSE (%) = 9.36, [7.04,12.83]). These models sometimes included indices with bands close to absorption features of N bonds or nitrogenous compounds, but also of other biochemicals. Models were independently and inter-annually validated using the bootstrap method, which allowed discarding those models non-robust across different years. Partial correlation analysis revealed that spectral estimators did not strongly respond to [N]Leaf but to other leaf variables such as chlorophyll and water, even if bands close to absorption features of N bonds or compounds were present in the models.This research has been funded by the BIOSPEC project “Linking spectral information at different spatial scales with biophysical parameters of Mediterranean vegetation in the context of Global Change” (http://www.lineas.cchs.csic.es/biospec) (CGL2008-02301/CLI, Ministry of Science and Innovation) and the FLUXPEC project “Monitoring changes in water and carbon fluxes from remote and proximal sensing in a Mediterranean dehesa ecosystem” (http://www.lineas.cchs.csic.es/fluxpec) (CGL2012-34383, Ministry of Economy and Competitiveness). Pacheco-Labrador, J. was sponsored by a JAE-Predoc grant (CSIC)Peer reviewe
An empirical standardized soil moisture index for agricultural drought assessment from remotely sensed data
AbstractWe propose a simple, spatially invariant and probabilistic year-round Empirical Standardized Soil Moisture Index (ESSMI) that is designed to classify soil moisture anomalies from harmonized multi-satellite surface data into categories of agricultural drought intensity. The ESSMI is computed by fitting a nonparametric empirical probability density function (ePDF) to historical time-series of soil moisture observations and then transforming it into a normal distribution with a mean of zero and standard deviation of one. Negative standard normal values indicate dry soil conditions, whereas positive values indicate wet soil conditions. Drought intensity is defined as the number of negative standard deviations between the observed soil moisture value and the respective normal climatological conditions. To evaluate the performance of the ESSMI, we fitted the ePDF to the Essential Climate Variable Soil Moisture (ECV SM) v02.0 data values collected in the period between January 1981 and December 2010 at South–Central America, and compared the root-mean-square-errors (RMSE) of residuals with those of beta and normal probability density functions (bPDF and nPDF, respectively). Goodness-of-fit results attained with time-series of ECV SM values averaged at monthly, seasonal, half-yearly and yearly timescales suggest that the ePDF provides triggers of agricultural drought onset and intensity that are more accurate and precise than the bPDF and nPDF. Furthermore, by accurately mapping the occurrence of major drought events over the last three decades, the ESSMI proved to be spatio-temporal consistent and the ECV SM data to provide a well calibrated and homogenized soil moisture climatology for the region. Maize, soybean and wheat crop yields in the region are highly correlated (r>0.82) with cumulative ESSMI values computed during the months of critical crop growing, indicating that the nonparametric index of soil moisture anomalies can be used for agricultural drought assessment
Assessing optical earth observation systems for mapping and monitoring temporary ponds in arid areas
GlacierNet2: A Hybrid Multi-Model Learning Architecture for Alpine Glacier Mapping
In recent decades, climate change has significantly affected glacier
dynamics, resulting in mass loss and an increased risk of glacier-related
hazards including supraglacial and proglacial lake development, as well as
catastrophic outburst flooding. Rapidly changing conditions dictate the need
for continuous and detailed observations and analysis of climate-glacier
dynamics. Thematic and quantitative information regarding glacier geometry is
fundamental for understanding climate forcing and the sensitivity of glaciers
to climate change, however, accurately mapping debris-cover glaciers (DCGs) is
notoriously difficult based upon the use of spectral information and
conventional machine-learning techniques. The objective of this research is to
improve upon an earlier proposed deep-learning-based approach, GlacierNet,
which was developed to exploit a convolutional neural-network segmentation
model to accurately outline regional DCG ablation zones. Specifically, we
developed an enhanced GlacierNet2 architecture thatincorporates multiple
models, automatic post-processing, and basin-level hydrological flow techniques
to improve the mapping of DCGs such that it includes both the ablation and
accumulation zones. Experimental evaluations demonstrate that GlacierNet2
improves the estimation of the ablation zone and allows a high level of
intersection over union (IOU: 0.8839) score. The proposed architecture provides
complete glacier (both accumulation and ablation zone) outlines at regional
scales, with an overall IOU score of 0.8619. This is a crucial first step in
automating complete glacier mapping that can be used for accurate glacier
modeling or mass-balance analysis
Defining optimal DEM resolutions and point densities for modelling hydrologically sensitive areas in agricultural catchments dominated by microtopography
AbstractDefining critical source areas (CSAs) of diffuse pollution in agricultural catchments depends upon the accurate delineation of hydrologically sensitive areas (HSAs) at highest risk of generating surface runoff pathways. In topographically complex landscapes, this delineation is constrained by digital elevation model (DEM) resolution and the influence of microtopographic features. To address this, optimal DEM resolutions and point densities for spatially modelling HSAs were investigated, for onward use in delineating CSAs. The surface runoff framework was modelled using the Topographic Wetness Index (TWI) and maps were derived from 0.25m LiDAR DEMs (40 bare-earth points m−2), resampled 1m and 2m LiDAR DEMs, and a radar generated 5m DEM. Furthermore, the resampled 1m and 2m LiDAR DEMs were regenerated with reduced bare-earth point densities (5, 2, 1, 0.5, 0.25 and 0.125 points m−2) to analyse effects on elevation accuracy and important microtopographic features. Results were compared to surface runoff field observations in two 10km2 agricultural catchments for evaluation. Analysis showed that the accuracy of modelled HSAs using different thresholds (5%, 10% and 15% of the catchment area with the highest TWI values) was much higher using LiDAR data compared to the 5m DEM (70–100% and 10–84%, respectively). This was attributed to the DEM capturing microtopographic features such as hedgerow banks, roads, tramlines and open agricultural drains, which acted as topographic barriers or channels that diverted runoff away from the hillslope scale flow direction. Furthermore, the identification of ‘breakthrough’ and ‘delivery’ points along runoff pathways where runoff and mobilised pollutants could be potentially transported between fields or delivered to the drainage channel network was much higher using LiDAR data compared to the 5m DEM (75–100% and 0–100%, respectively). Optimal DEM resolutions of 1–2m were identified for modelling HSAs, which balanced the need for microtopographic detail as well as surface generalisations required to model the natural hillslope scale movement of flow. Little loss of vertical accuracy was observed in 1–2m LiDAR DEMs with reduced bare-earth point densities of 2–5 points m−2, even at hedgerows. Further improvements in HSA models could be achieved if soil hydrological properties and the effects of flow sinks (filtered out in TWI models) on hydrological connectivity are also considered
Earth observation for sustainable urban planning in developing countries: needs, trends, and future directions
Abstract: Cities are constantly changing and authorities face immense challenges in obtaining accurate and timely data to effectively manage urban areas. This is particularly problematic in the developing world where municipal records are often unavailable or not updated. Spaceborne earth observation (EO) has great potential for providing up-to-date spatial information about urban areas. This article reviews the application of EO for supporting urban planning. In particular, the article overviews case studies where EO was used to derive products and indicators required by urban planners. The review concludes that EO has sufficiently matured in recent years but that a shift from the current focus on purely science-driven EO applications to the provision of useful information for day-to-day decision-making and urban sustainability monitoring is clearly needed
TaLAM: Mapping Land Cover in Lowlands and Uplands with Satellite Imagery
End-of-Project ReportThe Towards Land Cover Accounting and Monitoring (TaLAM) project is part of Ireland’s response to creating a national land cover mapping programme. Its aims are to demonstrate how the new digital map of Ireland, Prime2, from Ordnance Survey Ireland (OSI), can be combined with satellite imagery to produce land cover maps
- …