2,685 research outputs found
Acoustical Ranging Techniques in Embedded Wireless Sensor Networked Devices
Location sensing provides endless opportunities for a wide range of applications in GPS-obstructed environments;
where, typically, there is a need for higher degree of accuracy. In this article, we focus on robust range
estimation, an important prerequisite for fine-grained localization. Motivated by the promise of acoustic in
delivering high ranging accuracy, we present the design, implementation and evaluation of acoustic (both
ultrasound and audible) ranging systems.We distill the limitations of acoustic ranging; and present efficient
signal designs and detection algorithms to overcome the challenges of coverage, range, accuracy/resolution,
tolerance to Doppler’s effect, and audible intensity. We evaluate our proposed techniques experimentally on
TWEET, a low-power platform purpose-built for acoustic ranging applications. Our experiments demonstrate
an operational range of 20 m (outdoor) and an average accuracy 2 cm in the ultrasound domain. Finally,
we present the design of an audible-range acoustic tracking service that encompasses the benefits of a near-inaudible
acoustic broadband chirp and approximately two times increase in Doppler tolerance to achieve better performance
A Survey of Positioning Systems Using Visible LED Lights
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe
Detecting and locating electronic devices using their unintended electromagnetic emissions
Electronically-initiated explosives can have unintended electromagnetic emissions which propagate through walls and sealed containers. These emissions, if properly characterized, enable the prompt and accurate detection of explosive threats. The following dissertation develops and evaluates techniques for detecting and locating common electronic initiators. The unintended emissions of radio receivers and microcontrollers are analyzed. These emissions are low-power radio signals that result from the device\u27s normal operation. In the first section, it is demonstrated that arbitrary signals can be injected into a radio receiver\u27s unintended emissions using a relatively weak stimulation signal. This effect is called stimulated emissions. The performance of stimulated emissions is compared to passive detection techniques. The novel technique offers a 5 to 10 dB sensitivity improvement over passive methods for detecting radio receivers. The second section develops a radar-like technique for accurately locating radio receivers. The radar utilizes the stimulated emissions technique with wideband signals. A radar-like system is designed and implemented in hardware. Its accuracy tested in a noisy, multipath-rich, indoor environment. The proposed radar can locate superheterodyne radio receivers with a root mean square position error less than 5 meters when the SNR is 15 dB or above. In the third section, an analytic model is developed for the unintended emissions of microcontrollers. It is demonstrated that these emissions consist of a periodic train of impulses. Measurements of an 8051 microcontroller validate this model. The model is used to evaluate the noise performance of several existing algorithms. Results indicate that the pitch estimation techniques have a 4 dB sensitivity improvement over epoch folding algorithms --Abstract, page iii
Passive Tracking System and Method
System and methods are disclosed for passively determining the location of a moveable transmitter utilizing a pair of phase shifts at a receiver for extracting a direction vector from a receiver to the transmitter. In a preferred embodiment, a phase difference between the transmitter and receiver is extracted utilizing a noncoherent demodulator in the receiver. The receiver includes antenna array with three antenna elements, which preferably are patch antenna elements placed apart by one-half wavelength. Three receiver channels are preferably utilized for simultaneously processing the received signal from each of the three antenna elements. Multipath transmission paths for each of the three receiver channels are indexed so that comparisons of the same multipath component are made for each of the three receiver channels. The phase difference for each received signal is determined by comparing only the magnitudes of received and stored modulation signals to determine a winning modulation symbol
On the Security of the Automatic Dependent Surveillance-Broadcast Protocol
Automatic dependent surveillance-broadcast (ADS-B) is the communications
protocol currently being rolled out as part of next generation air
transportation systems. As the heart of modern air traffic control, it will
play an essential role in the protection of two billion passengers per year,
besides being crucial to many other interest groups in aviation. The inherent
lack of security measures in the ADS-B protocol has long been a topic in both
the aviation circles and in the academic community. Due to recently published
proof-of-concept attacks, the topic is becoming ever more pressing, especially
with the deadline for mandatory implementation in most airspaces fast
approaching.
This survey first summarizes the attacks and problems that have been reported
in relation to ADS-B security. Thereafter, it surveys both the theoretical and
practical efforts which have been previously conducted concerning these issues,
including possible countermeasures. In addition, the survey seeks to go beyond
the current state of the art and gives a detailed assessment of security
measures which have been developed more generally for related wireless networks
such as sensor networks and vehicular ad hoc networks, including a taxonomy of
all considered approaches.Comment: Survey, 22 Pages, 21 Figure
- …