Spectrum Sharing and Interference in Smart Homes

Internet of Things networks using Zigbee are very popular in smart homes. However, Zigbee networks are vulnerable to the interference of Wi-Fi networks because they share the same 2.4 GHz Industrial, Scientific, and Medical radio frequency band. Studies have shown that weaker Zigbee signals might be significantly interfered by stronger Wi-Fi signals. This type of interference may cause severe problems when these types of networks coexist in an indoor environment such as in a smart home. In this thesis, the performance of a Zigbee network with and without the presence of a Wi-Fi network has been evaluated in an apartment-based indoor environment mimicking a smart home. The experimental results are obtained and analyzed in terms of received signal strength indicator, packet delay, packet drop rate, and loopback throughput by changing operating channels, distances between Zigbee and Wi-Fi devices, transmission intervals of Zigbee packets, Zigbee transmit power, and Zigbee packet lengths

Device-to-Device Communication in 5G Cellular Networks

Owing to the unprecedented and continuous growth in the number of connected users and networked devices, the next-generation 5G cellular networks are envisaged to support enormous number of simultaneously connected users and devices with access to numerous services and applications by providing networks with highly improved data rate, higher capacity, lower end-to-end latency, improved spectral efficiency, at lower power consumption. D2D communication underlaying cellular networks has been proposed as one of the key components of the 5G technology as a means of providing efficient spectrum reuse for improved spectral efficiency and take advantage of proximity between devices for reduced latency, improved user throughput, and reduced power consumption. Although D2D communication underlaying cellular networks promises lots of potentials, unlike the conventional cellular network architecture, there are new design issues and technical challenges that must be addressed for proper implementation of the technology. These include new device discovery procedures, physical layer architecture and radio resource management schemes. This thesis explores the potentials of D2D communication as an underlay to 5G cellular networks and focuses on efficient interference management solutions through mode selection, resource allocation and power control schemes. In this work, a joint admission control, resource allocation, and power control scheme was implemented for D2D communication underlaying 5G cellular networks. The performance of the system was evaluated, and comparisons were made with similar schemes.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Long Term Evolution – License Assisted Access (LTE-LAA): Modeling and Coexistence Performance Analysis

Wireless communication built upon radio spectrum plays an instrumental role in today's modern world. With the explosive growth of mobile data traffic, mobile cellular networks need more spectrum to boost their system capacity. Long Term Evolution (LTE) technology leveraging the unlicensed band is anticipated to provide a solution to address this challenge. However, ensuring fair operation in terms of spectrum sharing with current unlicensed spectrum incumbents remains a key challenge for the success and viability of Unlicensed LTE (U-LTE). In particular, fair co-existence between unlicensed LTE and the Institute of Electrical and Electronics Engineers (IEEE) 802.11x standard, known as Wi-Fi, remains a principal concern, due to the ubiquitous, high-throughput and high capacity nature of both technologies. This work addresses the problem of modeling and evaluating the coexistence of LTE License-Assisted-Access (LTE-LAA) in the unlicensed band. The research work presents a novel analytical model using Markov Chain to accurately model the LAA Listen-Before-Talk (LBT) scheme, as specified in the final technical specification 36.213 of the 3rd Generation Partnership Project (3GPP) release 13 and 14. Model validation is demonstrated through numerical and simulation result comparison. Model performance evaluation is examined and contrasted with the IEEE 802.11 Distributed Coordination Function (DCF) and analysis results are subsequently presented and discussed herein. Finally, succeeding model development, a comprehensive coexistence performance analysis study is developed and completed examining the coexistence of homogeneous and heterogeneous network scenarios consisting of LTE-LAA and Wi-Fi nodes. As a result, the contribution of this work establishes a novel apparatus that facilitates numerical analysis of the LTE-LAA LBT mechanism and enables numerical comparison of future enhancements with the standardized LTE-LAA framework. In addition, this work delivers a delineating, unequivocal and in-depth examination of the effects and implications that the LTE-LAA LBT mechanism and its parameters have on coexistence performance of homogeneous and heterogeneous co-channel and co-located networks

A survey of symbiotic radio: Methodologies, applications, and future directions

The sixth generation (6G) wireless technology aims to achieve global connectivity with environmentally sustainable networks to improve the overall quality of life. The driving force behind these networks is the rapid evolution of the Internet of Things (IoT), which has led to a proliferation of wireless applications across various domains through the massive deployment of IoT devices. The major challenge is to support these devices with limited radio spectrum and energy-efficient communication. Symbiotic radio (SRad) technology is a promising solution that enables cooperative resource-sharing among radio systems through symbiotic relationships. By fostering mutualistic and competitive resource sharing, SRad technology enables the achievement of both common and individual objectives among the different systems. It is a cutting-edge approach that allows for the creation of new paradigms and efficient resource sharing and management. In this article, we present a detailed survey of SRad with the goal of offering valuable insights for future research and applications. To achieve this, we delve into the fundamental concepts of SRad technology, including radio symbiosis and its symbiotic relationships for coexistence and resource sharing among radio systems. We then review the state-of-the-art methodologies in-depth and introduce potential applications. Finally, we identify and discuss the open challenges and future research directions in this field

Optical Wireless Data Center Networks

Bandwidth and computation-intensive Big Data applications in disciplines like social media, bio- and nano-informatics, Internet-of-Things (IoT), and real-time analytics, are pushing existing access and core (backbone) networks as well as Data Center Networks (DCNs) to their limits. Next generation DCNs must support continuously increasing network traffic while satisfying minimum performance requirements of latency, reliability, flexibility and scalability. Therefore, a larger number of cables (i.e., copper-cables and fiber optics) may be required in conventional wired DCNs. In addition to limiting the possible topologies, large number of cables may result into design and development problems related to wire ducting and maintenance, heat dissipation, and power consumption. To address the cabling complexity in wired DCNs, we propose OWCells, a class of optical wireless cellular data center network architectures in which fixed line of sight (LOS) optical wireless communication (OWC) links are used to connect the racks arranged in regular polygonal topologies. We present the OWCell DCN architecture, develop its theoretical underpinnings, and investigate routing protocols and OWC transceiver design. To realize a fully wireless DCN, servers in racks must also be connected using OWC links. There is, however, a difficulty of connecting multiple adjacent network components, such as servers in a rack, using point-to-point LOS links. To overcome this problem, we propose and validate the feasibility of an FSO-Bus to connect multiple adjacent network components using NLOS point-to-point OWC links. Finally, to complete the design of the OWC transceiver, we develop a new class of strictly and rearrangeably non-blocking multicast optical switches in which multicast is performed efficiently at the physical optical (lower) layer rather than upper layers (e.g., application layer). Advisors: Jitender S. Deogun and Dennis R. Alexande

Millimeter Wave Cellular Networks: A MAC Layer Perspective

The millimeter wave (mmWave) frequency band is seen as a key enabler of multi-gigabit wireless access in future cellular networks. In order to overcome the propagation challenges, mmWave systems use a large number of antenna elements both at the base station and at the user equipment, which lead to high directivity gains, fully-directional communications, and possible noise-limited operations. The fundamental differences between mmWave networks and traditional ones challenge the classical design constraints, objectives, and available degrees of freedom. This paper addresses the implications that highly directional communication has on the design of an efficient medium access control (MAC) layer. The paper discusses key MAC layer issues, such as synchronization, random access, handover, channelization, interference management, scheduling, and association. The paper provides an integrated view on MAC layer issues for cellular networks, identifies new challenges and tradeoffs, and provides novel insights and solution approaches.Comment: 21 pages, 9 figures, 2 tables, to appear in IEEE Transactions on Communication

Towards environmental RF-EMF assessment of mmwave high-node density complex heterogeneous environments

The densification of multiple wireless communication systems that coexist nowadays, as well as the 5G new generation cellular systems advent towards the millimeter wave (mmWave) frequency range, give rise to complex context-aware scenarios with high-node density heterogeneous networks. In this work, a radiofrequency electromagnetic field (RF-EMF) exposure assessment from an empirical and modeling approach for a large, complex indoor setting with high node density and traffic is presented. For that purpose, an intensive and comprehensive in-depth RF-EMF E-field characterization study is provided in a public library study case, considering dense personal mobile communications (5G FR2 @28 GHz) and wireless 802.11ay (@60 GHz) data access services on the mmWave frequency range. By means of an enhanced in-house deterministic 3D ray launching (3D-RL) simulation tool for RF-EMF exposure assessment, different complex heterogenous scenarios of high complexity are assessed in realistic operation conditions, considering different user distributions and densities. The use of directive antennas and MIMO beamforming techniques, as well as all the corresponding features in terms of radio wave propagation, such as the body shielding effect, dispersive material properties of obstacles, the impact of the distribution of scatterers and the associated electromagnetic propagation phenomena, are considered for simulation. Discussion regarding the contribution and impact of the coexistence of multiple heterogeneous networks and services is presented, verifying compliance with the current established international regulation limits with exposure levels far below the aforementioned limits. Finally, the proposed simulation technique is validated with a complete empirical campaign of measurements, showing good agreement. In consequence, the obtained datasets and simulation estimations, along with the proposed RF-EMF simulation tool, could be a reference approach for the design, deployment and exposure assessment of the current and future wireless communication technologies on the mmWave spectrum, where massive high-node density heterogeneous networks are expected.Project RTI2018-095499-B-C31 was funded by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE). This project received funding from Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie Grant 801538

Towards Efficient and Enhanced Wireless Coexistence in the Unlicensed Spectrum

The 3rd Generation Partnership Project (3GPP) is developing the fifth generation (5G) of wireless broadband technology and has identified the unlicensed spectrum as a principal item on the plan of action. Listen-Before-Talk (LBT) has been recognized as the starting development point for the channel access scheme of future 5G New Radio-Unlicensed (NR-U) networks. Recent technical reports suggest that all sub-7 GHz unlicensed spectrum is targeted for 5G NR-U operation, including the 2.4 GHz Industrial, Scientific, and Medical (ISM) band. Literature is inundated with research on Wi-Fi and LBT-based long-term evolution License-Assisted Access (LTE-LAA) wireless coexistence analysis. While a treasure trove of radio spectrum has been approved for license-exempt use in the 6 GHz band, industry and standard organizations must make sure it is well utilized by enhancing their coexistence schemes. A proper assessment of the homogeneous LBT deployment is imperative under the new use cases and regulatory circumstances. The work presented herein aimed to fill the gap and underline the importance of improving channel access mechanisms in next-generation wireless systems. The research in this dissertation first analyzed the LBT channel access scheme and analytically evaluated its performance in terms of a metrics set, such as effective channel utilization, collision probability, mean access delay, and temporal fairness among coexisting nodes. Outcomes of the developed analytical model revealed inefficiencies in various cases. For example, high priority classes generally hinder overall effective channel utilization, exhibit a high collision rate, and incur long latencies compared to lower priorities; and low priority classes sustain longer delays in class-heterogeneous scenarios. The developed framework was then utilized to investigate wireless coexistence in a 5G-enabled intensive care unit, employing remote patient monitoring over 5G NR-U. A modified LBT scheme is then proposed in this work to enhance overall channel efficiency in homogeneous LBT deployments by reducing the collision probability among coexisting stations based on the analytical investigation of the LBT mechanism. It is expected that low-power, narrowband frequency hoppers will be allowed to operate in the 6 GHz spectrum based on recent European Communications Committee (ECC) mandates, which raises speculation around coexistence with incumbent radio access technologies (RATs). To address the potential operation of cellular LBT in the 2.4 GHz and frequency hopping systems in the 5- and 6-GHz bands, the coexistence of Bluetooth Low Energy (BLE) 5 and LBT was investigated empirically in an anechoic chamber. The mutual impact was explored by means of throughput, packet error rate, and interframe delays. Empirical evaluation results demonstrated how BLE throughput dropped as the intended-to-unintended signal ratio decreased and the way in which LBT classes exhibited a diminishing effect as the class priority descended. Long Range BLE physical layer (PHY) was found to sustain longer gap times (i.e., delay) than the other two PHYs; however, the LR PHY showed less susceptibility to interference. Results also demonstrated that low data rate BLE PHYs hindered LBT throughput performance since they correspond to longer airtime durations