Power Efficient Data-Aware SRAM Cell for SRAM-Based FPGA Architecture

The design of low-power SRAM cell becomes a necessity in today\u27s FPGAs, because SRAM is a critical component in FPGA design and consumes a large fraction of the total power. The present chapter provides an overview of various factors responsible for power consumption in FPGA and discusses the design techniques of low-power SRAM-based FPGA at system level, device level, and architecture levels. Finally, the chapter proposes a data-aware dynamic SRAM cell to control the power consumption in the cell. Stack effect has been adopted in the design to reduce the leakage current. The various peripheral circuits like address decoder circuit, write/read enable circuits, and sense amplifier have been modified to implement a power-efficient SRAM-based FPGA

Static noise margin analysis for CMOS logic cells in near-threshold

The advancement of semiconductor technology enabled the fabrication of devices with faster switching activity and chips with higher integration density. However, these advances are facing new impediments related to energy and power dissipation. Besides, the increasing demand for portable devices leads the circuit design paradigm to prioritize energy efficiency instead of performance. Altogether, this scenario motivates engineers towards reducing the supply voltage to the near and subthreshold regime to increase the lifespan of battery-powered devices. Even though operating in these regime offer interesting energy-frequency trade-offs, it brings challenges concerning noise tolerance. As the supply voltage reduces, the available noise margins decrease, and circuits become more prone to functional failures. In addition, near and subthreshold circuits are more susceptible to manufacturing variability, hence further aggravating noise issues. Other issues, such as wire minimization and gate fan-out, also contribute to the relevance of evaluating the noise margin of circuits early in the design Accordingly, this work investigates how to improve the static noise margin of digital synchronous circuits that will operate at the near/subthreshold regime. This investigation produces a set of three original contributions. The first is an automated tool to estimate the static noise margin of CMOS combinational cells. The second contribution is a realistic static noise margin estimation methodology that considers process-voltage-temperature variations. Results show that the proposed methodology allows to reduce up to 70% of the static noise margin pessimism. Finally, the third contribution is the noise-aware cell design methodology and the inclusion of a noise evaluation of complex circuits during the logic synthesis. The resulting library achieved higher static noise margin (up to 24%) and less spread among different cells (up to 62%).Os avanços na tecnologia de semicondutores possibilitou que se fabricasse dispositivos com atividade de chaveamento mais rápida e com maior capacidade de integração de transistores. Estes avanços, todavia, impuseram novos empecilhos relacionados com a dissipação de potência e energia. Além disso, a crescente demanda por dispositivos portáteis levaram à uma mudança no paradigma de projeto de circuitos para que se priorize energia ao invés de desempenho. Este cenário motivou à reduzir a tensão de alimentação com qual os dispositivos operam para um regime próximo ou abaixo da tensão de limiar, com o objetivo de aumentar sua duração de bateria. Apesar desta abordagem balancear características de performance e energia, ela traz novos desafios com relação a tolerância à ruído. Ao reduzirmos a tensão de alimentação, também reduz-se a margem de ruído disponível e, assim, os circuitos tornam-se mais suscetíveis à falhas funcionais. Somado à este efeito, circuitos com tensões de alimentação nestes regimes são mais sensíveis à variações do processo de fabricação, logo agravando problemas com ruído. Existem também outros aspectos, tais como a miniaturização das interconexões e a relação de fan-out de uma célula digital, que incentivam a avaliação de ruído nas fases iniciais do projeto de circuitos integrados Por estes motivos, este trabalho investiga como aprimorar a margem de ruído estática de circuitos síncronos digitais que irão operar em tensões no regime de tensão próximo ou abaixo do limiar. Esta investigação produz um conjunto de três contribuições originais. A primeira é uma ferramenta capaz de avaliar automaticamente a margem de ruído estática de células CMOS combinacionais. A segunda contribuição é uma metodologia realista para estimar a margem de ruído estática considerando variações de processo, tensão e temperatura. Os resultados obtidos mostram que a metodologia proposta permitiu reduzir até 70% do pessimismo das margens de ruído estática, Por último, a terceira contribuição é um fluxo de projeto de células combinacionais digitais considerando ruído, e uma abordagem para avaliar a margem de ruído estática de circuitos complexos durante a etapa de síntese lógica. A biblioteca de células resultante deste fluxo obteve maior margem de ruído (até 24%) e menor variação entre diferentes células (até 62%)

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book

Design of Low Leakage Multi Threshold (Vth) CMOS Level Shifter

In this paper, a low leakage multi Vth level shifter is designed for robust voltage shifting from sub threshold to above threshold domain using MTCMOS technique and sleepy keeper. MTCMOS is an effective circuit level technique that improves the performance and design by utilizing both low and high threshold voltage transistors. Leakage power dissipation has become an overriding concern for VLSI circuit designers. In this a “sleepy keeper” approach is preferred which reduces the leakage current while saving exact logic state. The new  low-power level shifter using sleepy keeper is compared with the previous work for different values of the lower supply voltage. When the circuits are individually analyzed for power consumption at 45nm CMOS technology, the new level shifter offer significant power savings up to 37% as compared to the previous work. Alternatively, when the circuits are individually analyzed for minimum propagation delay, speed is enhanced by up to 48% with  our approach to the circuit. All the simulation results are based on 45nm CMOS technology and  simulated in cadence tool.DOI:http://dx.doi.org/10.11591/ijece.v3i5.316

Parametric Yield of VLSI Systems under Variability: Analysis and Design Solutions

Variability has become one of the vital challenges that the designers of integrated circuits encounter. variability becomes increasingly important. Imperfect manufacturing process manifest itself as variations in the design parameters. These variations and those in the operating environment of VLSI circuits result in unexpected changes in the timing, power, and reliability of the circuits. With scaling transistor dimensions, process and environmental variations become significantly important in the modern VLSI design. A smaller feature size means that the physical characteristics of a device are more prone to these unaccounted-for changes. To achieve a robust design, the random and systematic fluctuations in the manufacturing process and the variations in the environmental parameters should be analyzed and the impact on the parametric yield should be addressed. This thesis studies the challenges and comprises solutions for designing robust VLSI systems in the presence of variations. Initially, to get some insight into the system design under variability, the parametric yield is examined for a small circuit. Understanding the impact of variations on the yield at the circuit level is vital to accurately estimate and optimize the yield at the system granularity. Motivated by the observations and results, found at the circuit level, statistical analyses are performed, and solutions are proposed, at the system level of abstraction, to reduce the impact of the variations and increase the parametric yield. At the circuit level, the impact of the supply and threshold voltage variations on the parametric yield is discussed. Here, a design centering methodology is proposed to maximize the parametric yield and optimize the power-performance trade-off under variations. In addition, the scaling trend in the yield loss is studied. Also, some considerations for design centering in the current and future CMOS technologies are explored. The investigation, at the circuit level, suggests that the operating temperature significantly affects the parametric yield. In addition, the yield is very sensitive to the magnitude of the variations in supply and threshold voltage. Therefore, the spatial variations in process and environmental variations make it necessary to analyze the yield at a higher granularity. Here, temperature and voltage variations are mapped across the chip to accurately estimate the yield loss at the system level. At the system level, initially the impact of process-induced temperature variations on the power grid design is analyzed. Also, an efficient verification method is provided that ensures the robustness of the power grid in the presence of variations. Then, a statistical analysis of the timing yield is conducted, by taking into account both the process and environmental variations. By considering the statistical profile of the temperature and supply voltage, the process variations are mapped to the delay variations across a die. This ensures an accurate estimation of the timing yield. In addition, a method is proposed to accurately estimate the power yield considering process-induced temperature and supply voltage variations. This helps check the robustness of the circuits early in the design process. Lastly, design solutions are presented to reduce the power consumption and increase the timing yield under the variations. In the first solution, a guideline for floorplaning optimization in the presence of temperature variations is offered. Non-uniformity in the thermal profiles of integrated circuits is an issue that impacts the parametric yield and threatens chip reliability. Therefore, the correlation between the total power consumption and the temperature variations across a chip is examined. As a result, floorplanning guidelines are proposed that uses the correlation to efficiently optimize the chip's total power and takes into account the thermal uniformity. The second design solution provides an optimization methodology for assigning the power supply pads across the chip for maximizing the timing yield. A mixed-integer nonlinear programming (MINLP) optimization problem, subject to voltage drop and current constraint, is efficiently solved to find the optimum number and location of the pads

Optimization and Characterization of CMOS for Ultra Low Power Applications

Aggressive voltage scaling into the subthreshold operating region holds great promise for applications with strict energy budget. However, it has been established that higher speed superthreshold device is not suitable for moderate performance subthreshold circuits. The design constraint for selecting Vth and TOX is much more flexible for subthreshold circuits at low voltage level than superthreshold circuits. In order to obtain better performance from a device under subthreshold conditions, it is necessary to investigate and optimize the process and geometry parameters of a Si MOSFET at nanometer technology node. This paper calibrates the fabrication process parameters and electrical characteristics for n- and p-MOSFETs with 35 nm physical gate length. Thereafter, the calibrated device for superthreshold application is optimized for better performance under subthreshold conditions using TCAD simulation. The device simulated in this work shows 9.89% improvement in subthreshold slope and 34% advantage in ION/IOFF ratio for the same drive current

Power Management for Deep Submicron Microprocessors

As VLSI technology scales, the enhanced performance of smaller transistors comes at the expense of increased power consumption. In addition to the dynamic power consumed by the circuits there is a tremendous increase in the leakage power consumption which is further exacerbated by the increasing operating temperatures. The total power consumption of modern processors is distributed between the processor core, memory and interconnects. In this research two novel power management techniques are presented targeting the functional units and the global interconnects. First, since most leakage control schemes for processor functional units are based on circuit level techniques, such schemes inherently lack information about the operational profile of higher-level components of the system. This is a barrier to the pivotal task of predicting standby time. Without this prediction, it is extremely difficult to assess the value of any leakage control scheme. Consequently, a methodology that can predict the standby time is highly beneficial in bridging the gap between the information available at the application level and the circuit implementations. In this work, a novel Dynamic Sleep Signal Generator (DSSG) is presented. It utilizes the usage traces extracted from cycle accurate simulations of benchmark programs to predict the long standby periods associated with the various functional units. The DSSG bases its decisions on the current and previous standby state of the functional units to accurately predict the length of the next standby period. The DSSG presents an alternative to Static Sleep Signal Generation (SSSG) based on static counters that trigger the generation of the sleep signal when the functional units idle for a prespecified number of cycles. The test results of the DSSG are obtained by the use of a modified RISC superscalar processor, implemented by SimpleScalar, the most widely accepted open source vehicle for architectural analysis. In addition, the results are further verified by a Simultaneous Multithreading simulator implemented by SMTSIM. Leakage saving results shows an increase of up to 146% in leakage savings using the DSSG versus the SSSG, with an accuracy of 60-80% for predicting long standby periods. Second, chip designers in their effort to achieve timing closure, have focused on achieving the lowest possible interconnect delay through buffer insertion and routing techniques. This approach, though, taxes the power budget of modern ICs, especially those intended for wireless applications. Also, in order to achieve more functionality, die sizes are constantly increasing. This trend is leading to an increase in the average global interconnect length which, in turn, requires more buffers to achieve timing closure. Unconstrained buffering is bound to adversely affect the overall chip performance, if the power consumption is added as a major performance metric. In fact, the number of global interconnect buffers is expected to reach hundreds of thousands to achieve an appropriate timing closure. To mitigate the impact of the power consumed by the interconnect buffers, a power-efficient multi-pin routing technique is proposed in this research. The problem is based on a graph representation of the routing possibilities, including buffer insertion and identifying the least power path between the interconnect source and set of sinks. The novel multi-pin routing technique is tested by applying it to the ISPD and IBM benchmarks to verify the accuracy, complexity, and solution quality. Results obtained indicate that an average power savings as high as 32% for the 130-nm technology is achieved with no impact on the maximum chip frequency

Throughput-Centric Wave-Pipelined Interconnect Circuits for Gigascale Integration

The central thesis of this research is that VLSI interconnect design strategies should shift from using global wires that can support only a single binary transition during the latency of the line to global wires that can sustain multiple bits traveling simultaneously along the length of the line. It is shown in this thesis that such throughput-centric multibit transmission can be achieved by wave-pipelining the interconnects using repeaters. A holistic analysis of wave-pipelined interconnect circuits, along with the full-custom optimization of these circuits, is performed in this research. With the help of models and methodologies developed in this thesis, the design rules for repeater insertion are crafted to simultaneously optimize performance, power, and area of VLSI global interconnect networks through a simultaneous application of voltage scaling and wire sizing. A qualitative analysis of latency, throughput, signal integrity, power dissipation, and area is performed that compares the results of design optimizations in this work to those of conventional global interconnect circuits. The objective of this thesis is to study the circuit- and system-level opportunities of voltage scaling, wire sizing, and repeater insertion in wave-pipelined global interconnect networks that are implemented in deep submicron technologies.Ph.D.Committee Chair: Davis, Jeffrey; Committee Member: Kohl, Paul; Committee Member: Meindl, James; Committee Member: Swaminathan, Madhavan; Committee Member: Wills, D. Scot