Physics-Based Electromigration Modeling and Analysis and Optimization

Long-term reliability is a major concern in modern VLSI design. Literature has shown that reliability gets worse as technology advances. It is expected that the future VLSI systems would have shorter reliability-induced lifetime comparing with previous generations. Being one of the most serious reliability effects, electromigration (EM) is a physical phenomenon of the migration of metal atoms due to the momentum exchange between atoms and the conducting electrons. It can cause wire resistance change or open circuit and result in functional failure of the circuit. Power-ground networks are the most vulnerable part to EM effect among all the interconnect wires since the current flow on this part is the largest on the chip. With new generation oftechnology node and aggressive design strategies, more accurate and efficient EM models are required. However, traditional EM approaches are very conservative and cannot meet current aggressive design strategies. Besides circuit level, EM also need to be thoroughly studied in system level due to limited power and temperature budgets among cores on chip. This research focuses on developing physical level EM model for VLSI circuits and system level EM optimization for multi-core systems in order to overcome the aforementioned problems. Specifically, for physical level, we develop two EM immortality check methods and a power grid EM check method. Firstly, a voltage based EM immortality analysis has been developed. Immortality condition in nucleation phase can be determined fast and accurately for multi-segment interconnect wires. Secondly, a saturation volume based incubation phase immortality check method has been proposed. This method can further reduce the redundancy in VLSI circuit design by immortality check in multiphase. Furthermore, both immortality check methods are integrated into a new power grid EM check methodology (EMspice) as filter for EM analysis. These filters can accelerate the simulation by filtering out immortal trees so that we only need to do simulation on fewer trees that are mortal. Coupled EM simulation considering both hydrostatic stress and electronic current/voltage in the power grid network will be applied to these mortal trees. This tool can work seamlessly with commercial synthesis flow. Besides physical level reliability models, system level reliability optimization is also discussed in this research. A deep reinforcement learning based EM optimization has been proposed for multi-core system. Both long term reliability effect (hard error) and transient soft error are considered. Energy can be optimized with all the reliability and other constraints fast and accurately compared to existing reliability management techniques. Last but not least, a scheduling based reliability optimization method for multi-core systems has been proposed. NBTI, HCI and EM are considered jointly. Lifetime of the system can be improved significantly compared to traditional methods which mainly focus on utilization

Electromigration modeling and layout optimization for advanced VLSI

textElectromigration (EM) is a critical problem for interconnect reliability in advanced VLSI design. Because EM is a strong function of current density, a smaller cross-sectional area of interconnects can degrade the EM-related lifetime of IC, which is expected to become more severe in future technology nodes. Moreover, as EM is governed by various factors such as temperature, material property, geometrical shape, and mechanical stress, different interconnect structures can have distinct EM issues and solutions to mitigate them. For example, one of the most prominent technologies, die stacking technology of three-dimensional (3D) ICs, can have different EM problems from that of planer ICs, due to their unique interconnects such as through-silicon vias (TSVs). This dissertation investigates EM in various interconnect structures, and applies the EM models to optimize IC layout. First, modeling of EM is developed for chip-level interconnects, such as wires, local vias, TSVs, and multi-scale vias (MSVs). Based on the models, fast and accurate EM-prediction methods are proposed for the chip-level designs. After that, by utilizing the EM-prediction methods, the layout optimization methods are suggested, such as EM-aware routing for 3D ICs and EM-aware redundant via insertion for the future technology nodes in VLSI. Experimental results show that the proposed EM modeling approaches enable fast and accurate EM evaluation for chip design, and the EM-aware layout optimization methods improve EM-robustness of advanced VLSI designs.Electrical and Computer Engineerin

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

A fast and retargetable framework for logic-IP-internal electromigration assessment comprehending advanced waveform effects

A new methodology for system-on-chip-level logic-IP-internal electromigration verification is presented in this paper, which significantly improves accuracy by comprehending the impact of the parasitic RC loading and voltage-dependent pin capacitance in the library model. It additionally provides an on-the-fly retargeting capability for reliability constraints by allowing arbitrary specifications of lifetimes, temperatures, voltages, and failure rates, as well as interoperability of the IPs across foundries. The characterization part of the methodology is expedited through the intelligent IP-response modeling. The ultimate benefit of the proposed approach is demonstrated on a 28-nm design by providing an on-the-fly specification of retargeted reliability constraints. The results show a high correlation with SPICE and were obtained with an order of magnitude reduction in the verification runtime.Peer ReviewedPostprint (author's final draft

A Temperature and Reliability Oriented Simulation Framework for Multi-core Architectures

The increasing complexity of multi-core architectures demands for a comprehensive evaluation of different solutions and alternatives at every stage of the design process, considering different aspects at the same time. Simulation frameworks are attractive tools to fulfil this requirement, due to their flexibility. Nevertheless, state-of-the-art simulation frameworks lack a joint analysis of power, performance, temperature profile and reliability projection at system-level, focusing only on a specific aspect. This paper presents a comprehensive estimation framework that jointly exploits these design metrics at system-level, considering processing cores, interconnect design and storage elements. We describe the framework in details, and provide a set of experiments that highlight its capability and flexibility, focusing on temperature and reliability analysis of multi-core architectures supported by Network-on-Chip interconnect