Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Compiler and Architecture Design for Coarse-Grained Programmable Accelerators

abstract: The holy grail of computer hardware across all market segments has been to sustain performance improvement at the same pace as silicon technology scales. As the technology scales and the size of transistors shrinks, the power consumption and energy usage per transistor decrease. On the other hand, the transistor density increases significantly by technology scaling. Due to technology factors, the reduction in power consumption per transistor is not sufficient to offset the increase in power consumption per unit area. Therefore, to improve performance, increasing energy-efficiency must be addressed at all design levels from circuit level to application and algorithm levels. At architectural level, one promising approach is to populate the system with hardware accelerators each optimized for a specific task. One drawback of hardware accelerators is that they are not programmable. Therefore, their utilization can be low as they perform one specific function. Using software programmable accelerators is an alternative approach to achieve high energy-efficiency and programmability. Due to intrinsic characteristics of software accelerators, they can exploit both instruction level parallelism and data level parallelism. Coarse-Grained Reconfigurable Architecture (CGRA) is a software programmable accelerator consists of a number of word-level functional units. Motivated by promising characteristics of software programmable accelerators, the potentials of CGRAs in future computing platforms is studied and an end-to-end CGRA research framework is developed. This framework consists of three different aspects: CGRA architectural design, integration in a computing system, and CGRA compiler. First, the design and implementation of a CGRA and its instruction set is presented. This design is then modeled in a cycle accurate system simulator. The simulation platform enables us to investigate several problems associated with a CGRA when it is deployed as an accelerator in a computing system. Next, the problem of mapping a compute intensive region of a program to CGRAs is formulated. From this formulation, several efficient algorithms are developed which effectively utilize CGRA scarce resources very well to minimize the running time of input applications. Finally, these mapping algorithms are integrated in a compiler framework to construct a compiler for CGRADissertation/ThesisDoctoral Dissertation Computer Science 201

Polymorphic Pipeline Array: A Flexible Multicore Accelerator for Mobile Multimedia Applications.

Mobile computing in the form of smart phones, netbooks, and PDAs has become an integral part of our everyday lives. Moving ahead to the next generation of mobile devices, we believe that multimedia will become a more critical and product-differentiating feature. High definition audio and video as well as 3D graphics provide richer interfaces and compelling capabilities. However, these algorithms also bring different computational challenges than wireless signal processing. Multimedia algorithms are more complex featuring more control flow and variable computational requirements where execution time is not dominated by innermost vector loops. Further, data access is more complex where media applications typically operate on multi-dimensional vectors of data rather than single-dimensional vectors with simple strides. Thus, the design of current mobile platforms requires re-examination to account for these new application domains. In this dissertation, we focus on the design of a programmable, low-power accelerator for multimedia algorithms referred to as a Polymorphic Pipeline Array (PPA). The PPA design is inspired by coarse-grain reconfigurable architectures (CGRAs) that consist of an array of function units interconnected by a mesh style interconnect. The PPA improves upon CGRAs by attacking two major limitations: scalability and acceleration limited to innermost loops. The large number of resources are fully utilized by exploiting both Lne-grain instruction-level and coarse-grain pipeline parallelism, and the acceleration is extended beyond innermost loops to encompass the whole region of applications. Various compiler and architectural optimizations are presented for CGRAs that form the basic building blocks of PPA. Two compiler techniques are presented that systematically construct the schedule with intelligent heuristics. Modulo graph embedding leverages graph embedding technique for scheduling in CGRAs and edgecentric modulo scheduling provides a communication-oriented way to address the scheduling problem. For architectural improvement, a novel control path design is presented that leverages the token network of dataflow machines to reduce the instructionmemory power. The PPA is designed with flexibility and programmability as first-order requirements to enable the hardware to be dynamically customizable to the application. A PPA exploit pipeline parallelism found in streaming applications to create a coarsegrain hardware pipeline to execute streaming media applications.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/64732/1/parkhc_1.pd

A time-multiplexed FPGA overlay with linear interconnect

Coarse-grained overlays improve FPGA design pro- ductivity by providing fast compilation and software like pro- grammability. Soft processor based overlays with well-defined ISAs are attractive to application developers due to their ease of use. However, these overlays have significant FPGA resource overheads. Time multiplexed (TM) CGRA-like overlays represent an interesting alternative as they are able to change their behavior on a cycle by cycle basis while the compute kernel executes. This reduces the FPGA resource needed, but at the cost of a higher initiation interval (II) and hence reduced throughput. The fully flexible routing network of current CGRA-like overlays results in high FPGA resource usage. However, many application kernels are acyclic and can be implemented using a much simpler linear feed-forward routing network. This paper examines a DSP block based TM overlay with linear interconnect where the overlay architecture takes account of the application kernels’ characteristics and the underlying FPGA architecture, so as to minimize the II and the FPGA resource usage. We examine a number of architectural extensions to the DSP block based functional unit to improve the II, throughput and latency. The results show an average 70% reduction in II, with corresponding improvements in throughput and latency

Scaling Kernel Speedup to Application-Level Performance with CGRAS: Stream Program

Department of Electrical EngineeringWhile accelerators often generate impressive speedup at the kernel level, the speedup often do not scale to the application-level performance improvement due to several reasons. In this paper we identify key factors impacting the application-level performance of CGRA (Coarse-Grained Recon???gurable Architecture) accelerators using stream programs as the target application. As a practical remedy, we also propose a low-cost architecture extension focusing on the nested loops appearing very frequently in stream programs. We also present detailed application-level performance evaluation for the full StreamIt benchmark applications, which suggests that CGRAs can realistically accelerate stream applications by 3.6???4.0 times on average, compared to software-only execution on a typical mobile processor.ope

Libra: Achieving Efficient Instruction- and Data- Parallel Execution for Mobile Applications.

Mobile computing as exemplified by the smart phone has become an integral part of our daily lives. The next generation of these devices will be driven by providing richer user experiences and compelling capabilities: higher definition multimedia, 3D graphics, augmented reality, and voice interfaces. To meet these goals, the core computing capabilities of the smart phone must be scaled. But, the energy budgets are increasing at a much lower rate, thus fundamental improvements in computing efficiency must be garnered. To meet this challenge, computer architects employ hardware accelerators in the form of SIMD and VLIW. Single-instruction multiple-data (SIMD) accelerators provide high degrees of scalability for applications rich in data-level parallelism (DLP). Very long instruction word (VLIW) accelerators provide moderate scalability for applications with high degrees of instruction-level parallelism (ILP). Unfortunately, applications are not so nicely partitioned into two groups: many applications have some DLP, but also contain significant fractions of code with low trip count loops, complex control/data dependences, or non-uniform execution behavior for which no DLP exists. Therefore, a more adaptive accelerator is required to be able to deploy resources as needed: exploit DLP on SIMD when it’s available, but fall back to ILP on the same hardware when necessary. In this thesis, we first focus on various compiler solutions that solve inefficiency problem in both VLIW and SIMD accelerators. For SIMD accelerators, a new vectorization pass, called SIMD Defragmenter, is introduced to uncover hidden DLP using subgraph identification in SIMD accelerators. CGRA express effectively accelerates sequential code regions using a bypass network in VLIW accelerators, and Resource Recycling leverages stream-graph modulo scheduling technique for scheduling of multiple code regions in multi-core accelerators. Second, we propose the new scalable multicore accelerator referred to as Libra for mobile systems, which can support execution of code regions having both DLP and ILP, as well as hybrid combinations of the two. We believe that as industry requires higher performance, the proposed flexible accelerator and compiler support will put more resources to work in order to meet the performance and power efficiency requirements.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/99840/1/yjunpark_1.pd

Mocarabe: High-Performance Time-Multiplexed Overlays for FPGAs

Coarse-grained reconfigurable array (CGRA) overlays can improve dataflow kernel throughput by an order of magnitude over Vivado HLS on Xilinx Alveo U280. This is possible with a combination of carefully floorplanned high-frequency (645 - 768 MHz Torus, 788 - 856 MHz Mesh, 583 - 746 MHz BFT) design and a scalable, communication-aware compiler. Our CGRA architecture supports configurable Processing Element (PE) functionality supported by a configurable number of communication channels to match application demands. Compared to recent FPGA overlays like 4×4 ADRES and HyCUBE implementations in CGRA-ME, our design operates at a faster clock frequency by up to 3.4×, while scaling to an orders-of-magnitude larger array size of 19×69 on Xilinx Alveo U280. We propose a novel topology agnostic ILP placer that formulates the CGRA placement problem into an ILP problem. Our ILP placer optimizes placement regardless of topology and even for non-linear objective functions by using pre-computed placement costs as inputs to the ILP problem formulation. Using the ILP placer reduces placement quadratic wirelength up to 37% compared to the commonly used simulated annealing approach but increases runtime from less than a minute to hours. Our communication-aware compiler targets HLS objectives such as initiation interval (II) and minimizes communication cost using an integer linear programming (ILP) formulation. Unlike SDC schedulers in FPGA HLS tools, we treat data movement as a first-class citizen by encoding the space and time resources of the communication network in the ILP formulation. Given the same constraints on operational resources as Vivado HLS, we can retain our target II and achieve up to 9.2× higher frequency. We compare Torus and Mesh topologies, and show Mesh has less latency per area compared to Torus for the same benchmarks