Closed Form Expressions for Delay to Ramp Inputs for On-Chip VLSI RC Interconnect

In high speed digital integrated circuits, interconnects delay can be significant and should be included for accurate analysis. Delay analysis for interconnect has been done widely by using moments of the impulse response, from the explicit Elmore delay (the first moment of the impulse response) expression, to moment matching methods which creates reduced order trans impedance and transfer function approximations. However, the Elmore delay is fast becoming ineffective for deep submicron technologies, and reduced order transfer function delays are impractical for use as early-phase design metrics or as design optimization cost functions. This paper describes an approach for fitting moments of the impulse response to probability density functions so that delay can be estimated accurately at an early physical design stage. For RC trees it is demonstrated that the inverse gamma function provides a provably stable approximation. We used the PERI [13] (Probability distribution function Extension for Ramp Inputs) technique that extends delay metrics for ramp inputs to the more general and realistic non-step inputs. The accuracy of our model is justified with the results compared with that of SPICE simulations. Keywords¾ Moment Matching, On-Chip Interconnect, Probability Distribution function, Cumulative Distribution function, Delay calculation, Slew Calculation, Beta Distribution, VLSI

EARLY PERFORMANCE PREDICTION METHODOLOGY FOR MANY-CORES ON CHIP BASED APPLICATIONS

Modern high performance computing applications such as personal computing, gaming, numerical simulations require application-specific integrated circuits (ASICs) that comprises of many cores. Performance for these applications depends mainly on latency of interconnects which transfer data between cores that implement applications by distributing tasks. Time-to-market is a critical consideration while designing ASICs for these applications. Therefore, to reduce design cycle time, predicting system performance accurately at an early stage of design is essential. With process technology in nanometer era, physical phenomena such as crosstalk, reflection on the propagating signal have a direct impact on performance. Incorporating these effects provides a better performance estimate at an early stage. This work presents a methodology for better performance prediction at an early stage of design, achieved by mapping system specification to a circuit-level netlist description. At system-level, to simplify description and for efficient simulation, SystemVerilog descriptions are employed. For modeling system performance at this abstraction, queueing theory based bounded queue models are applied. At the circuit level, behavioral Input/Output Buffer Information Specification (IBIS) models can be used for analyzing effects of these physical phenomena on on-chip signal integrity and hence performance. For behavioral circuit-level performance simulation with IBIS models, a netlist must be described consisting of interacting cores and a communication link. Two new netlists, IBIS-ISS and IBIS-AMI-ISS are introduced for this purpose. The cores are represented by a macromodel automatically generated by a developed tool from IBIS models. The generated IBIS models are employed in the new netlists. Early performance prediction methodology maps a system specification to an instance of these netlists to provide a better performance estimate at an early stage of design. The methodology is scalable in nanometer process technology and can be reused in different designs

Fast high-order variation-aware IC interconnect analysis

Interconnects constitute a dominant source of circuit delay for modern chip designs. The variations of critical dimensions in modern VLSI technologies lead to variability in interconnect performance that must be fully accounted for in timing verification. However, handling a multitude of inter-die/intra-die variations and assessing their impacts on circuit performance can dramatically complicate the timing analysis. In this thesis, three practical interconnect delay and slew analysis methods are presented to facilitate efficient evaluation of wire performance variability. The first method is described in detail in Chapter III. It harnesses a collection of computationally efficient procedures and closed-form formulas. By doing so, process variations are directly mapped into the variability of the output delay and slew. This method can provide the closed-form formulas of the output delay and slew at any sink node of the interconnect nets fully parameterized, in-process variations. The second method is based on adjoint sensitivity analysis and driving point model. It constructs the driving point model of the driver which drives the interconnect net by using the adjoint sensitivity analysis method. Then the driving point model can be propagated through the interconnect network by using the first method to obtain the closedform formulas of the output delay and slew. The third method is the generalized second-order adjoint sensitivity analysis. We give the mathematical derivation of this method in Chapter V. The theoretical value of this method is it can not only handle this particular variational interconnect delay and slew analysis, but it also provides an avenue for automatical linear network analysis and optimization. The proposed methods not only provide statistical performance evaluations of the interconnect network under analysis but also produce delay and slew expressions parameterized in the underlying process variations in a quadratic parametric form. Experimental results show that superior accuracy can be achieved by our proposed methods

A Fast Symbolic Computation Approach to Statistical Analysis of Mesh Networks with Multiple Sources *

Abstract-Mesh circuits typically consist of many resistive links and many sources. Accurate analysis of massive mesh networks is demanding in the current integrated circuit design practice, yet their computation confronts numerous challenges. When variation is considered, mesh analysis becomes a much harder task. This paper proposes a symbolic computation technique that can be applied to the moment-based analysis of mesh networks with multiple sources. The variation issues are easily taken care of by a structured computation mechanism, which can naturally facilitate sensitivity based analysis. Applications are addressed by applying the computation technique to a set of mesh circuits with varying sizes

A fast and retargetable framework for logic-IP-internal electromigration assessment comprehending advanced waveform effects

A new methodology for system-on-chip-level logic-IP-internal electromigration verification is presented in this paper, which significantly improves accuracy by comprehending the impact of the parasitic RC loading and voltage-dependent pin capacitance in the library model. It additionally provides an on-the-fly retargeting capability for reliability constraints by allowing arbitrary specifications of lifetimes, temperatures, voltages, and failure rates, as well as interoperability of the IPs across foundries. The characterization part of the methodology is expedited through the intelligent IP-response modeling. The ultimate benefit of the proposed approach is demonstrated on a 28-nm design by providing an on-the-fly specification of retargeted reliability constraints. The results show a high correlation with SPICE and were obtained with an order of magnitude reduction in the verification runtime.Peer ReviewedPostprint (author's final draft