Efficient and High-Quality Rendering of Higher-Order Geometric Data Representations

Computer-Aided Design (CAD) bezeichnet den Entwurf industrieller Produkte mit Hilfe von virtuellen 3D Modellen. Ein CAD-Modell besteht aus parametrischen Kurven und Flächen, in den meisten Fällen non-uniform rational B-Splines (NURBS). Diese mathematische Beschreibung wird ebenfalls zur Analyse, Optimierung und Präsentation des Modells verwendet. In jeder dieser Entwicklungsphasen wird eine unterschiedliche visuelle Darstellung benötigt, um den entsprechenden Nutzern ein geeignetes Feedback zu geben. Designer bevorzugen beispielsweise illustrative oder realistische Darstellungen, Ingenieure benötigen eine verständliche Visualisierung der Simulationsergebnisse, während eine immersive 3D Darstellung bei einer Benutzbarkeitsanalyse oder der Designauswahl hilfreich sein kann. Die interaktive Darstellung von NURBS-Modellen und -Simulationsdaten ist jedoch aufgrund des hohen Rechenaufwandes und der eingeschränkten Hardwareunterstützung eine große Herausforderung. Diese Arbeit stellt vier neuartige Verfahren vor, welche sich mit der interaktiven Darstellung von NURBS-Modellen und Simulationensdaten befassen. Die vorgestellten Algorithmen nutzen neue Fähigkeiten aktueller Grafikkarten aus, um den Stand der Technik bezüglich Qualität, Effizienz und Darstellungsgeschwindigkeit zu verbessern. Zwei dieser Verfahren befassen sich mit der direkten Darstellung der parametrischen Beschreibung ohne Approximationen oder zeitaufwändige Vorberechnungen. Die dabei vorgestellten Datenstrukturen und Algorithmen ermöglichen die effiziente Unterteilung, Klassifizierung, Tessellierung und Darstellung getrimmter NURBS-Flächen und einen interaktiven Ray-Casting-Algorithmus für die Isoflächenvisualisierung von NURBSbasierten isogeometrischen Analysen. Die weiteren zwei Verfahren beschreiben zum einen das vielseitige Konzept der programmierbaren Transparenz für illustrative und verständliche Visualisierungen tiefenkomplexer CAD-Modelle und zum anderen eine neue hybride Methode zur Reprojektion halbtransparenter und undurchsichtiger Bildinformation für die Beschleunigung der Erzeugung von stereoskopischen Bildpaaren. Die beiden letztgenannten Ansätze basieren auf rasterisierter Geometrie und sind somit ebenfalls für normale Dreiecksmodelle anwendbar, wodurch die Arbeiten auch einen wichtigen Beitrag in den Bereichen der Computergrafik und der virtuellen Realität darstellen. Die Auswertung der Arbeit wurde mit großen, realen NURBS-Datensätzen durchgeführt. Die Resultate zeigen, dass die direkte Darstellung auf Grundlage der parametrischen Beschreibung mit interaktiven Bildwiederholraten und in subpixelgenauer Qualität möglich ist. Die Einführung programmierbarer Transparenz ermöglicht zudem die Umsetzung kollaborativer 3D Interaktionstechniken für die Exploration der Modelle in virtuellenUmgebungen sowie illustrative und verständliche Visualisierungen tiefenkomplexer CAD-Modelle. Die Erzeugung stereoskopischer Bildpaare für die interaktive Visualisierung auf 3D Displays konnte beschleunigt werden. Diese messbare Verbesserung wurde zudem im Rahmen einer Nutzerstudie als wahrnehmbar und vorteilhaft befunden.In computer-aided design (CAD), industrial products are designed using a virtual 3D model. A CAD model typically consists of curves and surfaces in a parametric representation, in most cases, non-uniform rational B-splines (NURBS). The same representation is also used for the analysis, optimization and presentation of the model. In each phase of this process, different visualizations are required to provide an appropriate user feedback. Designers work with illustrative and realistic renderings, engineers need a comprehensible visualization of the simulation results, and usability studies or product presentations benefit from using a 3D display. However, the interactive visualization of NURBS models and corresponding physical simulations is a challenging task because of the computational complexity and the limited graphics hardware support. This thesis proposes four novel rendering approaches that improve the interactive visualization of CAD models and their analysis. The presented algorithms exploit latest graphics hardware capabilities to advance the state-of-the-art in terms of quality, efficiency and performance. In particular, two approaches describe the direct rendering of the parametric representation without precomputed approximations and timeconsuming pre-processing steps. New data structures and algorithms are presented for the efficient partition, classification, tessellation, and rendering of trimmed NURBS surfaces as well as the first direct isosurface ray-casting approach for NURBS-based isogeometric analysis. The other two approaches introduce the versatile concept of programmable order-independent semi-transparency for the illustrative and comprehensible visualization of depth-complex CAD models, and a novel method for the hybrid reprojection of opaque and semi-transparent image information to accelerate stereoscopic rendering. Both approaches are also applicable to standard polygonal geometry which contributes to the computer graphics and virtual reality research communities. The evaluation is based on real-world NURBS-based models and simulation data. The results show that rendering can be performed directly on the underlying parametric representation with interactive frame rates and subpixel-precise image results. The computational costs of additional visualization effects, such as semi-transparency and stereoscopic rendering, are reduced to maintain interactive frame rates. The benefit of this performance gain was confirmed by quantitative measurements and a pilot user study

Estimating performance of an ray- tracing ASIC design

Journal ArticleRecursive ray tracing is a powerful rendering technique used to compute realistic images by simulating the global light transport in a scene. Algorithmic improvements and FPGA-based hardware implementations of ray tracing have demonstrated realtime performance but hardware that achieves performance levels comparable to commodity rasterization graphics chips is still not available. This paper describes the architecture and ASIC implementations of the DRPU design (Dynamic Ray Processing Unit) that closes this performance gap. The DRPU supports fully programmable shading and most kinds of dynamic scenes and thus provides similar capabilities as current GPUs. It achieves high efficiency due to SIMD processing of floating point vectors, massive multithreading, synchronous execution of packets of threads, and careful management of caches for scene data. To support dynamic scenes B-KD trees are used as spatial index structures that are processed by a custom traversal and intersection unit and modified by an Update Processor on scene changes

High-Level GPU Programming: Domain-Specific Optimization and Inference

When writing computer software one is often forced to balance the need for high run-time performance with high programmer productivity. By using a high-level language it is often possible to cut development times, but this typically comes at the cost of reduced run-time performance. Using a lower-level language, programs can be made very efficient but at the cost of increased development time. Real-time computer graphics is an area where there are very high demands on both performance and visual quality. Typically, large portions of such applications are written in lower-level languages and also rely on dedicated hardware, in the form of programmable graphics processing units (GPUs), for handling computationally demanding rendering algorithms. These GPUs are parallel stream processors, specialized towards computer graphics, that have computational performance more than a magnitude higher than corresponding CPUs. This has revolutionized computer graphics and also led to GPUs being used to solve more general numerical problems, such as fluid and physics simulation, protein folding, image processing, and databases. Unfortunately, the highly specialized nature of GPUs has also made them difficult to program. In this dissertation we show that GPUs can be programmed at a higher level, while maintaining performance, compared to current lower-level languages. By constructing a domain-specific language (DSL), which provides appropriate domain-specific abstractions and user-annotations, it is possible to write programs in a more abstract and modular manner. Using knowledge of the domain it is possible for the DSL compiler to generate very efficient code. We show that, by experiment, the performance of our DSLs is equal to that of GPU programs written by hand using current low-level languages. Also, control over the trade-offs between visual quality and performance is retained. In the papers included in this dissertation, we present domain-specific languages targeted at numerical processing and computer graphics, respectively. These DSL have been implemented as embedded languages in Python, a dynamic programming language that provide a rich set of high-level features. In this dissertation we show how these features can be used to facilitate the construction of embedded languages

Developing serious games for cultural heritage: a state-of-the-art review

Although the widespread use of gaming for leisure purposes has been well documented, the use of games to support cultural heritage purposes, such as historical teaching and learning, or for enhancing museum visits, has been less well considered. The state-of-the-art in serious game technology is identical to that of the state-of-the-art in entertainment games technology. As a result, the field of serious heritage games concerns itself with recent advances in computer games, real-time computer graphics, virtual and augmented reality and artificial intelligence. On the other hand, the main strengths of serious gaming applications may be generalised as being in the areas of communication, visual expression of information, collaboration mechanisms, interactivity and entertainment. In this report, we will focus on the state-of-the-art with respect to the theories, methods and technologies used in serious heritage games. We provide an overview of existing literature of relevance to the domain, discuss the strengths and weaknesses of the described methods and point out unsolved problems and challenges. In addition, several case studies illustrating the application of methods and technologies used in cultural heritage are presented

Efficient Hybrid Image Warping for High Frame-Rate Stereoscopic Rendering

Modern virtual reality simulations require a constant high-frame rate from the rendering engine. They may also require very low latency and stereo images. Previous rendering engines for virtual reality applications have exploited spatial and temporal coherence by using image-warping to re-use previous frames or to render a stereo pair at lower cost than running the full render pipeline twice. However these previous approaches have shown artifacts or have not scaled well with image size. We present a new image-warping algorithm that has several novel contributions: an adaptive grid generation algorithm for proxy geometry for image warping; a low-pass hole-filling algorithm to address un-occlusion; and support for transparent surfaces by efficiently ray casting transparent fragments stored in per-pixel linked lists of an A-Buffer. We evaluate our algorithm with a variety of challenging test cases. The results show that it achieves better quality image-warping than state-of-the-art techniques and that it can support transparent surfaces effectively. Finally, we show that our algorithm can achieve image warping at rates suitable for practical use in a variety of applications on modern virtual reality equipment

The Iray Light Transport Simulation and Rendering System

While ray tracing has become increasingly common and path tracing is well understood by now, a major challenge lies in crafting an easy-to-use and efficient system implementing these technologies. Following a purely physically-based paradigm while still allowing for artistic workflows, the Iray light transport simulation and rendering system allows for rendering complex scenes by the push of a button and thus makes accurate light transport simulation widely available. In this document we discuss the challenges and implementation choices that follow from our primary design decisions, demonstrating that such a rendering system can be made a practical, scalable, and efficient real-world application that has been adopted by various companies across many fields and is in use by many industry professionals today

Platform Independent Real-Time X3D Shaders and their Applications in Bioinformatics Visualization

Since the introduction of programmable Graphics Processing Units (GPUs) and procedural shaders, hardware vendors have each developed their own individual real-time shading language standard. None of these shading languages is fully platform independent. Although this real-time programmable shader technology could be developed into 3D application on a single system, this platform dependent limitation keeps the shader technology away from 3D Internet applications. The primary purpose of this dissertation is to design a framework for translating different shader formats to platform independent shaders and embed them into the eXtensible 3D (X3D) scene for 3D web applications. This framework includes a back-end core shader converter, which translates shaders among different shading languages with a middle XML layer. Also included is a shader library containing a basic set of shaders that developers can load and add shaders to. This framework will then be applied to some applications in Biomolecular Visualization