Distributed MIMO for wireless sensor networks

Over the past decade, wireless sensor networks have gained more research attention for their potential applications in healthcare, defense, environmental monitoring, etc. Due to the strict energy limitation in the sensor node, techniques used for energy saving are necessary for this kind of network. MIMO technology is proven to be an effective method of increasing the channel capacity and supporting higher data rate under a fixed power budget and bit-error-rate requirement. So, wireless sensor networks and MIMO technology are combined and investigated in this thesis. The key contributions of this thesis are detailed below. Firstly, the extended total energy consumption equations for different transmission modes in cluster-based wireless sensor networks are derived. The transmitting energy consumption and the circuit energy consumption are taken into account in both intra-cluster and inter-cluster phases respectively. Secondly, a resource allocation framework is proposed for cluster-based cooperative MIMO on consideration of circuit energy. By introducing two adjusting parameters for the transmitting energy and the time slot allocation between intra-cluster and inter-cluster phases, this framework is designed to achieve the maximum data throughput of the whole system whilst maintaining the capacity and outage probability requirement in these two phases respectively. Thirdly, on comparison of various transmission modes in wireless sensor networks, a relatively energy-efficient mode switching framework is proposed for both single-hop and multi-hop transmissions. Based on the destination and the neighboring nodes’ path-loss, the source node can decide which transmission mode, SISO or cooperative MISO, single-hop or multi-hop, should be chosen. Conditions for each mode switching are investigated. The possible existing area of the cooperative nodes and the relaying nodes can be obtained from this framework

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Cooperative Diversity and Partner Selection in Wireless Networks

Next generation wireless communication systems are expected to provide a variety of services including voice, data and video. The rapidly growing demand for these services needs high data rate wireless communication systems with reliability and high user capacity. Recently, it has been shown that reliability and achievable data rate of wireless communication systems increases dramatically by employing multiple transmit and receive antennas. Transmit diversity is a powerful technique for combating multipath fading in wireless communications. However, employing multiple antennas in a mobile terminal to achieve the transmit diversity in the uplink is not feasible due to the limited size of the mobile unit. In order to overcome this problem, a new mode of transmit diversity called cooperative diversity (CD) based on user cooperation, was proposed very recently. By user cooperation, it is meant that the sender transmits to the destination and copies to other users, called partners, for relaying to the destination. The antennas of the sender and the partners together form a multiple antenna situation. CD systems are immuned not only against small scale channel fading but also against large scale channel fading. On the other hand, CD systems are more sensitive to interuser (between sender and partner) transmission errors and user mobility. In this dissertation, we propose a bandwidth and power efficient CD system which could be accommodated with minimal modifications in the currently available direct or point-to-point communication systems. The proposed CD system is based on quadrature signaling (QS). With quadrature signaling, both sender’s and partners’ information symbols are transmitted simultaneously in his/her multiple access channels. It also reduces the synchronization as well as the interference problems that occur in the schemes reported in the literature. The performance of the proposed QS-CD system is analyzed at different layers. First, we study the bit error probability (BEP) of the QS-CD system for both fixed and adaptive relaying at the partner. It is shown from the BEP performance that the QS-CD system can achieve diversity order of two. Then, a cross-layer communication system is developed by combing the proposed QS-CD system at the physical layer and the truncated stop-and- wait automatic repeat request (ARQ) at the data link layer. The performance of the cross-layer system is analyzed and compared with existing schemes in the literature for performance metrics at the data link layer and upper layers, i.e., frame error rate, packet loss rate, average packet delay, throughput, etc. In addition, the studies show that the proposed QS-CD-ARQ system outperforms existing schemes when it has a good partner. In this respect, the proposed system is fully utilizing the communication channel and less complex in terms of implementation when compared with the existing systems. Since the partner selection gives significant impact on the performance of the CD systems, partner selection algorithms (PSAs) are extensively analyzed for both static and mobile user network. In this case, each individual user would like to take advantage of cooperation by choosing a suitable partner. The objective of an individual user may conflict with the objective of the network. In this regard, we would like to introduce a PSA which tries to balance both users and network objectives by taking user mobility into consideration. The proposed PSA referred to as worst link first (WLF), to choose the best partner in cooperative communication systems. The WLF algorithm gives priority to the worst link user to choose its partner and to maximize the energy gain of the radio cell. It is easy to implement not only in centralized networks but also in distributed networks with or without the global knowledge of users in the network. The proposed WLF matching algorithm, being less complex than the optimal maximum weighted (MW) matching and the heuristic based Greedy matching algorithms, yields performance characteristics close to those of MW matching algorithm and better than the Greedy matching algorithm in both static and mobile user networks. Furthermore, the proposed matching algorithm provides around 10dB energy gain with optimal power allocation over a non-cooperative system which is equivalent to prolonging the cell phone battery recharge time by about ten times

Cooperative Diversity and Partner Selection in Wireless Networks

Next generation wireless communication systems are expected to provide a variety of services including voice, data and video. The rapidly growing demand for these services needs high data rate wireless communication systems with reliability and high user capacity. Recently, it has been shown that reliability and achievable data rate of wireless communication systems increases dramatically by employing multiple transmit and receive antennas. Transmit diversity is a powerful technique for combating multipath fading in wireless communications. However, employing multiple antennas in a mobile terminal to achieve the transmit diversity in the uplink is not feasible due to the limited size of the mobile unit. In order to overcome this problem, a new mode of transmit diversity called cooperative diversity (CD) based on user cooperation, was proposed very recently. By user cooperation, it is meant that the sender transmits to the destination and copies to other users, called partners, for relaying to the destination. The antennas of the sender and the partners together form a multiple antenna situation. CD systems are immuned not only against small scale channel fading but also against large scale channel fading. On the other hand, CD systems are more sensitive to interuser (between sender and partner) transmission errors and user mobility. In this dissertation, we propose a bandwidth and power efficient CD system which could be accommodated with minimal modifications in the currently available direct or point-to-point communication systems. The proposed CD system is based on quadrature signaling (QS). With quadrature signaling, both sender’s and partners’ information symbols are transmitted simultaneously in his/her multiple access channels. It also reduces the synchronization as well as the interference problems that occur in the schemes reported in the literature. The performance of the proposed QS-CD system is analyzed at different layers. First, we study the bit error probability (BEP) of the QS-CD system for both fixed and adaptive relaying at the partner. It is shown from the BEP performance that the QS-CD system can achieve diversity order of two. Then, a cross-layer communication system is developed by combing the proposed QS-CD system at the physical layer and the truncated stop-and- wait automatic repeat request (ARQ) at the data link layer. The performance of the cross-layer system is analyzed and compared with existing schemes in the literature for performance metrics at the data link layer and upper layers, i.e., frame error rate, packet loss rate, average packet delay, throughput, etc. In addition, the studies show that the proposed QS-CD-ARQ system outperforms existing schemes when it has a good partner. In this respect, the proposed system is fully utilizing the communication channel and less complex in terms of implementation when compared with the existing systems. Since the partner selection gives significant impact on the performance of the CD systems, partner selection algorithms (PSAs) are extensively analyzed for both static and mobile user network. In this case, each individual user would like to take advantage of cooperation by choosing a suitable partner. The objective of an individual user may conflict with the objective of the network. In this regard, we would like to introduce a PSA which tries to balance both users and network objectives by taking user mobility into consideration. The proposed PSA referred to as worst link first (WLF), to choose the best partner in cooperative communication systems. The WLF algorithm gives priority to the worst link user to choose its partner and to maximize the energy gain of the radio cell. It is easy to implement not only in centralized networks but also in distributed networks with or without the global knowledge of users in the network. The proposed WLF matching algorithm, being less complex than the optimal maximum weighted (MW) matching and the heuristic based Greedy matching algorithms, yields performance characteristics close to those of MW matching algorithm and better than the Greedy matching algorithm in both static and mobile user networks. Furthermore, the proposed matching algorithm provides around 10dB energy gain with optimal power allocation over a non-cooperative system which is equivalent to prolonging the cell phone battery recharge time by about ten times

Energy Efficient Cooperative Communication

This dissertation studies several problems centered around developing a better understanding of the energy efficiency of cooperative wireless communication systems. Cooperative communication is a technique where two or more nodes in a wireless network pool their antenna resources to form a virtual antenna array . Over the last decade, researchers have shown that many of the benefits of real antenna arrays, e.g. spatial diversity, increased range, and/or decreased transmission energy, can be achieved by nodes using cooperative transmission. This dissertation extends the current body of knowledge by providing a comprehensive study of the energy efficiency of two-source cooperative transmission under differing assumptions about channel state knowledge, cooperative protocol, and node selfishness. The first part of this dissertation analyzes the effect of channel state information on the optimum energy allocation and energy efficiency of a simple cooperative transmission protocol called orthogonal amplify-and-forward (OAF). The source nodes are required to achieve a quality-of service (QoS) constraint, e.g. signal to noise ratio or outage probability, at the destination. Since a QoS constraint does not specify a unique transmit energy allocation when the nodes use OAF cooperative transmission, minimum total energy strategies are provided for both short-term and long-term QoS constraints. For independent Rayleigh fading channels, full knowledge of the channel state at both of the sources and at the destination is shown to significantly improve the energy efficiency of OAF cooperative transmission as well as direct (non-cooperative) transmission. The results also demonstrate how channel state knowledge affects the minimum total energy allocation strategy. Under identical channel state knowledge assumptions, the results demonstrate that OAF cooperative transmission tends to have better energy efficiency than direct transmission over a wide range of channel conditions. The second part of this dissertation focuses on the development of an opportunistic hybrid cooperative transmission protocol that achieves increased energy efficiency by not only optimizing the resource allocation but also by selecting the most energy efficient cooperative transmission protocol from a set of available protocols according to the current channel state. The protocols considered in the development of the hybrid cooperative transmission protocol include compress-and-forward (CF), estimate-and-forward (EF), non-orthogonal amplify-and-forward (NAF), and decode-and-forward (DF). Instantaneous capacity results are analyzed under the assumption of full channel state knowledge at both of the sources and the destination node. Numerical results are presented showing that the delay limited capacity and outage probability of the hybrid cooperative transmission protocol are superior to that of any single protocol and are also close to the cut-set bound over a wide range of channel conditions. The final part of this dissertation focuses on the issue of node selfishness in cooperative transmission. It is common to assume in networks with a central authority, e.g. military networks, that nodes will always be willing to offer help to other nodes when requested to do so. This assumption may not be valid in ad hoc networks operating without a central authority. This section of the dissertation considers the effect selfish behavior on the energy efficiency of cooperative communication systems. Using tools from non-cooperative game theory, a two-player relaying game is formulated and analyzed in non-fading and fading channel scenarios. In non-fading channels, it is shown that a cooperative equilibrium can exist between two self-interested sources given that the end of the cooperative interaction is uncertain, that the sources can achieve mutual benefit through cooperation, and that the sources are sufficiently patient in the sense that they value future payoffs. In fading channels, a cooperative conditional trigger strategy is proposed and shown to be an equilibrium of the two-player game. Sources following this strategy are shown to achieve an energy efficiency very close to that of a centrally-controlled system when they are sufficiently patient. The results in this section show that cooperation can often be established between two purely self-interested sources without the development of extrinsic incentive mechanisms like virtual currency

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Cooperative diversity in wireless networks : algorithms and architectures

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2002.Includes bibliographical references (p. 179-187).To effectively combat multipath fading across multiple protocol layers in wireless networks, this dissertation develops energy-efficient algorithms that employ certain kinds of cooperation among terminals, and illustrates how one might incorporate these algorithms into various network architectures. In these techniques, sets of terminals relay signals for each other to create a virtual antenna array, trading off the costs-in power, bandwidth, and complexity-for the greater benefits gained by exploiting spatial diversity in the channel. By contrast, classical network architectures only employ point-to-point transmission and thus forego these benefits. After summarizing a model for the wireless channel, we present various practical cooperative diversity algorithms based upon different types of relay processing and re-encoding, both with and without limited feedback from the ultimate receivers. Using information theoretic tools, we show that all these algorithms can achieve full spatial diversity, as if each terminal had as many transmit antennas as the entire set of cooperating terminals. Such diversity gains translate into greatly improved robustness to fading for the same transmit power, or substantially reduced transmit power for the same level of performance. For example, with two cooperating terminals, power savings as much as 12 dB (a factor of sixteen) are possible for outage probabilities around one in a thousand. Finally, we discuss how the required level of complexity in the terminals makes different algorithms suitable for particular network architectures that arise in, for example, current cellular and ad-hoc networks.by J. Nicholas Laneman.Ph.D