Inter-satellite Microwave Radiometer Calibration

The removal of systematic brightness temperature (Tb) biases is necessary when producing decadal passive microwave data sets for weather and climate research. It is crucial to achieve Tb measurement consistency among all satellites in a constellation as well as to maintain sustained calibration accuracy over the lifetime of each satellite sensor. In-orbit inter-satellite radiometric calibration techniques provide a long term, group-wise solution; however, since radiometers operate at different frequencies and viewing angles, Tb normalizations are made before making intermediate comparisons of their near-simultaneous measurements. In this dissertation, a new approach is investigated to perform these normalizations from one satellite\u27s measurements to another. It uses Taylor\u27s series expansion around a source frequency to predict Tb of a desired frequency. The relationship between Tb\u27s and frequencies are derived from simulations using an oceanic Radiative Transfer Model (RTM) over a wide variety of environmental conditions. The original RTM is built on oceanic radiative transfer theory. Refinements are made to the model by modifying and tuning algorithms for calculating sea surface emission, atmospheric emission and attenuations. Validations were performed with collocated WindSat measurements. This radiometric calibration approach is applied to establish an absolute brightness temperature reference using near-simultaneous pair-wise comparisons between a non-sun synchronous radiometer and two sun-synchronous polar-orbiting radiometers: the Tropical Rain Measurement Mission (TRMM) Microwave Imager (TMI), WindSat (on Coriolis) and Advanced Microwave Scanning Radiometer (AMSR) on Advanced Earth Observing System -II (ADEOSII), respectively. Collocated measurements between WindSat and TMI as well as between AMSR and TMI, within selected 10 weeks in 2003 for each pair, are collected, filtered and applied in the cross calibration. AMSR is calibrated to WindSat using TMI as a transfer standard. Accuracy prediction and error source analysis are discussed along with calibration results. This inter-satellite radiometric calibration approach provides technical support for NASA\u27s Global Precipitation Mission which relies on a constellation of cooperative satellites with a variety of microwave radiometers to make global rainfall measurements

Analysis and Inter-Calibration of Wet Path Delay Datasets to Compute the Wet Tropospheric Correction for CryoSat-2 over Ocean

Unlike most altimetric missions, CryoSat-2 is not equipped with an onboard microwave radiometer (MWR) to provide wet tropospheric correction (WTC) to radar altimeter measurements, thus, relying on a model-based one provided by the European Center for Medium-range Weather Forecasts (ECMWF). In the ambit of ESA funded project CP4O, an improved WTC for CryoSat-2 data over ocean is under development, based on a data combination algorithm (DComb) through objective analysis of WTC values derived from all existing global-scale data types. The scope of this study is the analysis and inter-calibration of the large dataset of total column water vapor (TCWV) products from scanning MWR aboard Remote Sensing (RS) missions for use in the WTC computation for CryoSat-2. The main issues regarding the computation of the WTC from all TCWV products are discussed. The analysis of the orbital parameters of CryoSat-2 and all other considered RS missions, their sensor characteristics and inter-calibration is presented, providing an insight into the expected impact of these datasets on the WTC estimation. The most suitable approach for calculating the WTC from TCWV is investigated. For this type of application, after calibration with respect to an appropriate reference, two approaches were found to give very similar results, with root mean square differences of 2 mm

Inter-Calibration of Satellite Passive Microwave Land Observations from AMSR-E and AMSR2 Using Overlapping FY3B-MWRI Sensor Measurements

The development and continuity of consistent long-term data records from similar overlapping satellite observations is critical for global monitoring and environmental change assessments. We developed an empirical approach for inter-calibration of satellite microwave brightness temperature (Tb) records over land from the Advanced Microwave Scanning Radiometer for EOS (AMSR-E) and Microwave Scanning Radiometer 2 (AMSR2) using overlapping Tb observations from the Microwave Radiation Imager (MWRI). Double Differencing (DD) calculations revealed significant AMSR2 and MWRI biases relative to AMSR-E. Pixel-wise linear relationships were established from overlapping Tb records and used for calibrating MWRI and AMSR2 records to the AMSR-E baseline. The integrated multi-sensor Tb record was largely consistent over the major global vegetation and climate zones; sensor biases were generally well calibrated, though residual Tb differences inherent to different sensor configurations were still present. Daily surface air temperature estimates from the calibrated AMSR2 Tb inputs also showed favorable accuracy against independent measurements from 142 global weather stations (R2 ≥ 0.75, RMSE ≤ 3.64 °C), but with slightly lower accuracy than the AMSR-E baseline (R2 ≥ 0.78, RMSE ≤ 3.46 °C). The proposed method is promising for generating consistent, uninterrupted global land parameter records spanning the AMSR-E and continuing AMSR2 missions

Parametric optimal estimation retrieval of the non-precipitating parameters over the global oceans, A

2006 Summer.Includes bibliographical references (pages 82-87).Covers not scanned.Print version deaccessioned 2021.There are a multitude of spacebome microwave sensors in orbit, including the TRMM Microwave Imager (TMI), the Special Sensor Microwave/lmager (SSM/I) onboard the DMSP satellites, the Advanced Microwave Scanning Radiometer - Earth Observing System (AMSR-E), SSMIS, WINDSAT, and others. Future missions, such as the planned Global Precipitation Measurement (GPM) Mission, will incorporate additional spacebome microwave sensors. The need for consistent geophysical parameter retrievals among an ever-increasing number of microwave sensors requires the development of a physical retrieval scheme independent of any particular sensor and flexible enough so that future microwave sensors can be added with relative ease. To this end, we attempt to develop a parametric retrieval algorithm currently applicable to the non-precipitating atmosphere with the goal of having consistent non-precipitating geophysical parameter products. An algorithm of this nature makes is easier to merge separate products, which, when combined, would allow for additional global sampling or longer time series of the retrieved global geophysical parameters for climate purposes. This algorithm is currently applied to TMI, SSM/I and AMSR-E with results that are comparable to other independent microwave retrievals of the non-precipitating parameters designed for specific sensors. The physical retrieval is developed within the optimal estimation framework. The development of the retrieval within this framework ensures that the simulated radiances corresponding to the retrieved geophysical parameters will always agree with observed radiances regardless of the sensor being used. Furthermore, a framework of this nature allows one to easily add additional physics to describe radiation propagation through raining scenes, thus allowing for the merger of cloud and precipitation retrievals, if so desired. Additionally, optimal estimation provides error estimates on the retrieval, a product often not available in other algorithms, information on potential forward model/sensor biases, and a number of useful diagnostics providing information on the validity and significance of the retrieval (such as Chi-Square, indicative of the general "fit" between the model and observations and the A-Matrix, indicating the sensitivity of the model to a change in the geophysical parameters). There is an expected global response of these diagnostics based on the scene being observed, such as in the case of a raining scene. Fortunately, since TRMM has a precipitation radar (TRMM PR) in addition to a radiometer (TMI) flying on-board, the expected response of the retrieval diagnostics to rainfall can be evaluated. It is shown that a potentially powerful rainfall screen can then be developed for use in passive microwave rainfall and cloud property retrieval algorithms with the possibility of discriminating between precipitating and nonprecipitating scenes, and further indicating the possible contamination of rainfall in cloud liquid water path microwave retrievals

Multi-Sensor Historical Climatology of Satellite-Derived Global Land Surface Moisture

A historical climatology of continuous satellite-derived global land surface soil moisture is being developed. The data consist of surface soil moisture retrievals derived from all available historical and active satellite microwave sensors, including Nimbus-7 Scanning Multichannel Microwave Radiometer, Defense Meteorological Satellites Program Special Sensor Microwave Imager, Tropical Rainfall Measuring Mission Microwave Imager, and Aqua Advanced Microwave Scanning Radiometer for EOS, and span the period from November 1978 through the end of 2007. This new data set is a global product and is consistent in its retrieval approach for the entire period of data record. The moisture retrievals are made with a radiative transfer-based land parameter retrieval model. The various sensors have different technical specifications, including primary wavelength, spatial resolution, and temporal frequency of coverage. These sensor specifications and their effect on the data retrievals are discussed. The model is described in detail, and the quality of the data with respect to the different sensors is discussed as well. Examples of the different sensor retrievals illustrating global patterns are presented. Additional validation studies were performed with large-scale observational soil moisture data sets and are also presented. The data will be made available for use by the general science community

Microwave Radiometer Inter-Calibration: Algorithm Development and Application.

Microwave radiometer inter-calibration is an essential component of any effort to combine measurements from two or more radiometers into one dataset for scientific studies. One spaceborne instrument in low Earth orbit is not sufficient to perform long-term climate studies or to provide measurements more than twice per day at any given location on Earth. Measurements from several radiometers are necessary for analyses over extended temporal and spatial ranges. In order to combine the measurements, the radiometers need to be inter-calibrated due to the instruments having unique instrument designs and calibrations. Inter-calibration ensures that consistent scientific parameters are retrieved from the radiometers. The development of a cold end inter-calibration algorithm is presented. The algorithm makes use of vicarious cold calibration, along with the double difference method, to calculate calibration differences between radiometers. The performance of the algorithm is characterized using data from current conical scanning microwave radiometers. The vicarious cold calibration double difference is able to sufficiently account for design differences between two radiometers including frequency, earth incidence angle, and orbital characteristics. An estimate of the uncertainty in the inter-calibration algorithm is given as a result of potential errors in the geophysical inputs and improper accounting of seasonal and diurnal variability. The vicarious cold calibration double difference method is shown to be a valid and accurate inter-calibration algorithm. Results are compared with calibration differences calculated using alternate algorithms and sufficient agreement is attained. Inter-calibration is shown to be necessary for achieving consistency in retrieved scientific parameters by using the vicarious cold calibration double difference method to inter-calibrate two radiometers that are then used to derive rain accumulations. Inter-calibration results in a significant improvement in the rain accumulation agreement between the radiometers. This validates inter-calibration algorithm development and shows that it has a positive impact on achieving consistency in scientific parameter retrievals.PhDAtmospheric, Oceanic and Space SciencesUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/107078/1/rakro_1.pd

Assessing the Relative Performance of Microwave-based Satellite Rain Rate Retrievals using TRMM Ground Validation Data

Space-borne microwave sensors provide critical rain information used in several global multi-satellite rain products, which in turn are used for a variety of important studies, including landslide forecasting, flash flood warning, data assimilation, climate studies, and validation of model forecast of precipitation. This study employs four years (2003-2006) of satellite data to assess the relative performance and skill of SSM/I (F13, F14 and F15), AMSU-B (N15, N16 and N17), AMSR-E (AQUA) and the TRMM Microwave Imager (TMI) in estimating surface rainfall based on direct instantaneous comparison with ground-based rain estimates from Tropical Rainfall Measuring Mission (TRMM) Ground Validation (GV) sites at Kwajalein, Republic of the Marshall Islands (KWAJ) and Melbourne, Florida (MELB). The relative performance of each of these satellites is examined via comparisons with GV radar-based rain rate estimates. Because underlying surface terrain is known to affect the relative performance of the satellite algorithms, the data for MELB was further stratified into ocean, land and coast categories using a 0.25 terrain mask. Of all the satellite estimates compared in this study, TMI and AMSR-E exhibited considerably higher correlations and skills in estimating/observing surface precipitation. While SSM/I and AMSU-B exhibited lower correlations and skills for each of the different terrain categories, the SSM/I absolute biases trended slightly lower than AMSRE over ocean, where the observations from both emission and scattering channels were used in the retrievals. AMSU-B exhibited the least skill relative to GV in all of the relevant statistical categories, and an anomalous spike was observed in the probability distribution functions near 1.0 mm hr-1. This statistical artifact appears to be related to attempts by algorithm developers to include some lighter rain rates, not easily detectable by its scatter-only frequencies. AMSU-B, however, agreed well with GV when the matching data was analyzed on monthly scales. These results signal developers of global rainfall products, such as the TRMM Multi-Satellite Precipitation Analysis (TMPA), and the Climate Data Center s Morphing (CMORPH) technique, that care must be taken when incorporating data from these input satellite estimates in order to provide the highest quality estimates in their products

The TRMM Multi-Satellite Precipitation Analysis (TMPA)

The Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis (TMPA) is intended to provide a "best" estimate of quasi-global precipitation from the wide variety of modern satellite-borne precipitation-related sensors. Estimates are provided at relatively fine scales (0.25degx0.25deg, 3-hourly) in both real and post-real time to accommodate a wide range of researchers. However, the errors inherent in the finest scale estimates are large. The most successful use of the TMPA data is when the analysis takes advantage of the fine-scale data to create time/space averages appropriate to the user s application. We review the conceptual basis for the TMPA, summarize the processing sequence, and focus on two new activities. First, a recent upgrade to the real-time version incorporates several additional satellite data sources and employs monthly climatological adjustments to approximate the bias characteristics of the research quality post-real-time product. Second, an upgrade of the research quality post-real-time TMPA from Version 6 to Version 7 (in beta test at press time) is designed to provide a variety of improvements that increase the list of input data sets and correct several issues. Future enhancements for the TMPA will include improved error estimation, extension to higher latitudes, and a shift to a Lagrangian time interpolation scheme

Multi-satellite observed responses of precipitation and its extremes to interannual climate variability

The consistency of precipitation variability estimated from the multiple satellite-based observing systems is assessed. There is generally good agreement between TRMM TMI, SSM/I, GPCP and AMSRE datasets for the inter-annual variability of precipitation since 1997 but the HOAPS dataset appears to overestimate the magnitude of variability. Over the tropical ocean the TRMM 3B42 dataset produces unrealistic variabilitys. Based upon deseasonalised GPCP data for the period 1998-2008, the sensitivity of global mean precipitation (P) to surface temperature (T) changes (dP/dT) is about 6%/K, although a smaller sensitivity of 3.6%/K is found using monthly GPCP data over the longer period 1989-2008. Over the tropical oceans dP/dT ranges from 10-30%/K depending upon time-period and dataset while over tropical land dP/dT is -8 to -11%/K for the 1998-2008 period. Analyzing the response of the tropical ocean precipitation intensity distribution to changes in T we find the wetter area P shows a strong positive response to T of around 20%/K. The response over the drier tropical regimes is less coherent and varies with datasets, but responses over the tropical land show significant negative relationships over an interannual time-scale. The spatial and temporal resolutions of the datasets strongly influence the precipitation responses over the tropical oceans and help explain some of the discrepancy between different datasets. Consistency between datasets is found to increase on averaging from daily to 5-day time-scales and considering a 1o (or coarser) spatial resolution. Defining the wet and dry tropical ocean regime by the 60th percentile of P intensity, the 5-day average, 1o TMI data exhibits a coherent drying of the dry regime at the rate of -20%/K and the wet regime becomes wetter at a similar rate with warming

Quantifying Uncertainties in Land Surface Microwave Emissivity Retrievals

Uncertainties in the retrievals of microwave land surface emissivities were quantified over two types of land surfaces: desert and tropical rainforest. Retrievals from satellite-based microwave imagers, including SSM/I, TMI and AMSR-E, were studied. Our results show that there are considerable differences between the retrievals from different sensors and from different groups over these two land surface types. In addition, the mean emissivity values show different spectral behavior across the frequencies. With the true emissivity assumed largely constant over both of the two sites throughout the study period, the differences are largely attributed to the systematic and random errors in the retrievals. Generally these retrievals tend to agree better at lower frequencies than at higher ones, with systematic differences ranging 1~4% (3~12 K) over desert and 1~7% (3~20 K) over rainforest. The random errors within each retrieval dataset are in the range of 0.5~2% (2~6 K). In particular, at 85.0/89.0 GHz, there are very large differences between the different retrieval datasets, and within each retrieval dataset itself. Further investigation reveals that these differences are mostly likely caused by rain/cloud contamination, which can lead to random errors up to 10~17 K under the most severe conditions