Parameters Identification for a Composite Piezoelectric Actuator Dynamics

This work presents an approach for identifying the model of a composite piezoelectric (PZT) bimorph actuator dynamics, with the objective of creating a robust model that can be used under various operating conditions. This actuator exhibits nonlinear behavior that can be described using backlash and hysteresis. A linear dynamic model with a damping matrix that incorporates the Bouc–Wen hysteresis model and the backlash operators is developed. This work proposes identifying the actuator’s model parameters using the hybrid master-slave genetic algorithm neural network (HGANN). In this algorithm, the neural network exploits the ability of the genetic algorithm to search globally to optimize its structure, weights, biases and transfer functions to perform time series analysis efficiently. A total of nine datasets (cases) representing three different voltage amplitudes excited at three different frequencies are used to train and validate the model. Four cases are considered for training the NN architecture, connection weights, bias weights and learning rules. The remaining five cases are used to validate the model, which produced results that closely match the experimental ones. The analysis shows that damping parameters are inversely proportional to the excitation frequency. This indicates that the suggested hysteresis model is too general for the PZT model in this work. It also suggests that backlash appears only when dynamic forces become dominant

Identification of the Servomechanism used for micro-displacement

Friction causes important errors in the control of small servomechanism and should be determined with precision in order to increase the system performance. This paper describes the method to identify the model parameters of a small linear drive with ball-screw. Two kinds of friction models will be applied for the servomechanism looking to rise its micropositioning abilities. The first one includes the static, viscous and Stribeck friction with hysteresis, and the second one uses the Lugre model. The results will be compared taking into account the criterion error, the accuracy and the normalized mean-square-error of the identified mechanical parameters. The coefficients of the models are identified by a recursive identification method using data acquisition and special filtering technics. The least square identification method is used in this paper in order to establish the motor parameters used as initial condition of the recursive estimation method. Computer simulations and experimental results demonstrate the efficiency of the proposed model

A novel mechanical analogy based battery model for SoC estimation using a multi-cell EKF

The future evolution of technological systems dedicated to improve energy efficiency will strongly depend on effective and reliable Energy Storage Systems, as key components for Smart Grids, microgrids and electric mobility. Besides possible improvements in chemical materials and cells design, the Battery Management System is the most important electronic device that improves the reliability of a battery pack. In fact, a precise State of Charge (SoC) estimation allows the energy flows controller to exploit better the full capacity of each cell. In this paper, we propose an alternative definition for the SoC, explaining the rationales by a mechanical analogy. We introduce a novel cell model, conceived as a series of three electric dipoles, together with a procedure for parameters estimation relying only on voltage measures and a given current profile. The three dipoles represent the quasi-stationary, the dynamics and the istantaneous components of voltage measures. An Extended Kalman Filer (EKF) is adopted as a nonlinear state estimator. Moreover, we propose a multi-cell EKF system based on a round-robin approach to allow the same processing block to keep track of many cells at the same time. Performance tests with a prototype battery pack composed by 18 A123 cells connected in series show encouraging results.Comment: 8 page, 12 figures, 1 tabl

From model-driven to data-driven : a review of hysteresis modeling in structural and mechanical systems

Hysteresis is a natural phenomenon that widely exists in structural and mechanical systems. The characteristics of structural hysteretic behaviors are complicated. Therefore, numerous methods have been developed to describe hysteresis. In this paper, a review of the available hysteretic modeling methods is carried out. Such methods are divided into: a) model-driven and b) datadriven methods. The model-driven method uses parameter identification to determine parameters. Three types of parametric models are introduced including polynomial models, differential based models, and operator based models. Four algorithms as least mean square error algorithm, Kalman filter algorithm, metaheuristic algorithms, and Bayesian estimation are presented to realize parameter identification. The data-driven method utilizes universal mathematical models to describe hysteretic behavior. Regression model, artificial neural network, least square support vector machine, and deep learning are introduced in turn as the classical data-driven methods. Model-data driven hybrid methods are also discussed to make up for the shortcomings of the two methods. Based on a multi-dimensional evaluation, the existing problems and open challenges of different hysteresis modeling methods are discussed. Some possible research directions about hysteresis description are given in the final section

Continuous time controller based on SMC and disturbance observer for piezoelectric actuators

Abstract – In this work, analog application for the Sliding Mode Control (SMC) to piezoelectric actuators (PEA) is presented. DSP application of the algorithm suffers from ADC and DAC conversions and mainly faces limitations in sampling time interval. Moreover piezoelectric actuators are known to have very large bandwidth close to the DSP operation frequency. Therefore, with the direct analog application, improvement of the performance and high frequency operation are expected. Design of an appropriate SMC together with a disturbance observer is suggested to have continuous control output and related experimental results for position tracking are presented with comparison of DSP and analog control application

An adaptive weighted least square support vector regression for hysteresis in piezoelectric actuators

© 2017 Elsevier B.V. To overcome the low positioning accuracy of piezoelectric actuators (PZAs) caused by the hysteresis nonlinearity, this paper proposes an adaptive weighted least squares support vector regression (AWLSSVR) to model the rate-dependent hysteresis of PZA. Firstly, the AWLSSVR hyperparameters are optimized by using particle swarm optimization. Then an adaptive weighting strategy is proposed to eliminate the effects of noises in the training dataset and reduce the sample size at the same time. Finally, the proposed approach is applied to predict the hysteresis of PZA. The results show that the proposed method is more accurate than other versions of least squares support vector regression for training samples with noises, and meanwhile reduces the sample size and speeds up calculation