ANFIS based Direct Torque Control of PMSM Motor for Speed and Torque Regulation

Nowadays, the Permanent Magnet Synchronous Motors (PMSM) are gaining popularity among electric motors due to their high efficiency, high-speed operation, ruggedness, and small size. PMSM motors comprise a trapezoidal electromotive force which is also called synchronous motors. Direct Torque Control (DTC) has been extensively applied in speed regulation systems due to its better dynamic behavior. The controller manages the amplitude of torque and stator flux directly using the direct axis current. To manage the motor speed, the torque error, flux error, and projected location of flux linkage are employed to adjust the inverter switching sequence via Space Vector Pulse Width Modulation (SVPWM). One of the most common problems encountered in a PMSM motor is Torque ripple, which is recreated by power electronic commutation and a better controller reduces the ripples to increase the drive's performance. Conventional controllers such as PI, PID and SVPWM-DTC were compared with the proposed Adaptive Neuro-Fuzzy Inference System (ANFIS) in terms of performance measures such as speed and torque ripple. In this work, the Two-Gaussian membership function of the ANFIS controller is used in conjunction with a PMSM motor to reduce torque ripple up to 0.53 Nm and maintain the speed with a distortion error of 2.33 %

ANFIS-based prediction of power generation for combined cycle power plant

This paper presents the application of an adaptive neuro-fuzzy inference system (ANFIS) to predict the generated electrical power in a combined cycle power plant. The ANFIS architecture is implemented in MATLAB through a code that utilizes a hybrid algorithm that combines gradient descent and the least square estimator to train the network. The Model is verified by applying it to approximate a nonlinear equation with three variables, the time series Mackey-Glass equation and the ANFIS toolbox in MATLAB. Once its validity is confirmed, ANFIS is implemented to forecast the generated electrical power by the power plant. The ANFIS has three inputs: temperature, pressure, and relative humidity. Each input is fuzzified by three Gaussian membership functions. The first-order Sugeno type defuzzification approach is utilized to evaluate a crisp output. Proposed ANFIS is cable of successfully predicting power generation with extremely high accuracy and being much faster than Toolbox, which makes it a promising tool for energy generation applications

Low Speed Longitudinal Control Algorithms for Automated Vehicles in Simulation and Real Platforms

Advanced Driver Assistance Systems (ADAS) acting over throttle and brake are already available in level 2 automated vehicles. In order to increase the level of automation new systems need to be tested in an extensive set of complex scenarios, ensuring safety under all circumstances. Validation of these systems using real vehicles presents important drawbacks: the time needed to drive millions of kilometers, the risk associated with some situations, and the high cost involved. Simulation platforms emerge as a feasible solution.Therefore, robust and reliable virtual environments to test automated driving maneuvers and control techniques are needed. In that sense, this paper presents a use case where three longitudinal low speed control techniques are designed, tuned, and validated using an in-house simulation framework and later applied in a real vehicle. Control algorithms include a classical PID, an adaptive network fuzzy inference system (ANFIS), and a Model Predictive Control (MPC). The simulated dynamics are calculated using a multibody vehicle model. In addition, longitudinal actuators of a Renault Twizy are characterized through empirical tests. A comparative analysis of results between simulated and real platform shows the effectiveness of the proposed framework for designing and validating longitudinal controllers for real automated vehicles.Te authors would like to acknowledge the ESCEL Project ENABLE-S3 (with Grant no. 692455-2) for the support in the development of this work

Motion control of unmanned ground vehicle using artificial intelligence

The aim of this thesis is to solve two problems: the. trajectory tracking and navigation, for controlling the motion of unmanned ground vehicles (UGV). Such vehicles are usually used in industry for assisting automated production process or delivery services to improve and enhance the quality and efficiency. With regard to the trajectory tracking problem, the main task is to design a new method that is capable of minimising trajectory-tracking errors in UGV. To achieve this, a comprehensive mathematical model needs to be established that contains kinematic and dynamic characteristics beside actuators. In addition, different trajectories need to be generated and applied individually as a reference input, i.e. continuous gradient trajectories such as linear, circular and lemniscuses or a non-continuous gradient trajectory such as a square trajectory. The design method is based on a novel fractional order proportional integral derivative (FOPID) control strategy, which is proposed to control the movement of UGV to track given trajectories. Two FOPID controllers are required in this design. The first FOPID is constructed in order to control the orientation of UGV. The second FOPID controller is to control the speed of UGV. The particle swarm optimization (PSO) algorithm is used to obtain the optimal parameters for both controllers. The significance of the proposed method is that an observable improvement has been achieved in terms of minimising trajectory-tracking errors and reducing control efforts, especially in continuous gradient trajectories. The stability of the proposed controllers is investigated based upon Nyquist stability criterion. Moreover, the robustness of the controllers is examined in the presence of disturbances to demonstrate the effectiveness of the controllers under certain harsh conditions. The influence from external disturbances has been represented by square pulses and sinusoidal waves. The drawback of this method, however, a highly trajectory tracking error is observed in non-continuous gradient trajectories due to the sharpness of the rotation at the corners of a square trajectory. To overcome this drawback, a new controller, abbreviated as (NN-FOPID), has been proposed based on a combination of neural networks and the FOPID. The purpose is to minimise the trajectory tracking error of non-continuous trajectories, in particular. The Levenberg-Marquardt (LM) algorithm is used to train the NN-FOPID controller. The neural networks’ cognitive capacities have made the system adaptable to respond effectively to the variants in trajectories. The obtained results by using NN-FOPID have shown a significant improvement of reducing errors of trajectory tracking and increasing control efforts over the results by FOPID. The other task is to solve the navigation problem of UGV in static and dynamic environments. This can be conducted by firstly constructing workspace environments that contain multiple dynamic and static obstacles. The dynamic obstructing obstacles can move in different velocities. The static obstacles can be randomly positioned in the workspace and all obstacles are allowed to have different sizes and shapes. Secondly, a UGV can be placed in any initial posture on the condition that it has to reach a given destination within the boundaries of the workspace. Thirdly, a method based on fuzzy inference systems (FIS) is proposed to control the motion of the UGV. The design of FIS is based on fuzzification, inference engine and defuzzification processes. The navigation task is divided into obstacle avoidance and target reaching tasks. Consequently, two individual FIS controllers are required to drive the actuators of the UGV, one is to avoid obstacles and the other is to reach a target. Both FIS controllers are combined through a switching mechanism to select the obstacle avoidance FIS controller if there is an obstacle, otherwise choosing reaching target FIS. The simulation results have confirmed the effectiveness of the proposed design in terms of obtaining optimal paths with shortest elapsed time. Similarly, a new method is proposed based on an adaptive neurofuzzy inference system (ANFIS) to guide the UGV in unstructured environments. This method combines the advantages of adaptive leaning and inference fuzzy system. The simulation results have demonstrated adequate achievements in terms of obtaining shortest and feasible paths whilst avoiding static obstructing obstacles and hence reaching the specified targets speedily. Finally, a UGV is constructed to investigate the overall performance of the proposed FIS controllers practically. The architecture of the UGV consists of three ultrasonic sensors, a magnetic compass and two quadratic decoders that they are interfaced with an Arduino microcontroller to read the sensory information. The Arduino, who acts as a slave microcontroller is serially connected with a master Raspberry Pi microcontroller. Raspberry Pi and Arduino communicate with each other based on a proposed hierarchical algorithm. Three case studies are introduced to demonstrate the effectiveness and the validation of the proposed FIS controllers and the UGV’s platform in real-time

Navigational Path Analysis of Mobile Robot in Various Environments

This dissertation describes work in the area of an autonomous mobile robot. The objective is navigation of mobile robot in a real world dynamic environment avoiding structured and unstructured obstacles either they are static or dynamic. The shapes and position of obstacles are not known to robot prior to navigation. The mobile robot has sensory recognition of specific objects in the environments. This sensory-information provides local information of robots immediate surroundings to its controllers. The information is dealt intelligently by the robot to reach the global objective (the target). Navigational paths as well as time taken during navigation by the mobile robot can be expressed as an optimisation problem and thus can be analyzed and solved using AI techniques. The optimisation of path as well as time taken is based on the kinematic stability and the intelligence of the robot controller. A successful way of structuring the navigation task deals with the issues of individual behaviour design and action coordination of the behaviours. The navigation objective is addressed using fuzzy logic, neural network, adaptive neuro-fuzzy inference system and different other AI technique.The research also addresses distributed autonomous systems using multiple robot

Performance Analysis Of Hybrid Ai-Based Technique For Maximum Power Point Tracking In Solar Energy System Applications

Demand is increasing for a system based on renewable energy sources that can be employed to both fulfill rising electricity needs and mitigate climate change. Solar energy is the most prominent renewable energy option. However, only 30%-40% of the solar irradiance or sunlight intensity is converted into electrical energy by the solar panel system, which is low compared to other sources. This is because the solar power system\u27s output curve for power versus voltage has just one Global Maximum Power Point (GMPP) and several local Maximum Power Points (MPPs). For a long time, substantial research in Artificial Intelligence (AI) has been undertaken to build algorithms that can track the MPP more efficiently to acquire the most output from a Photovoltaic (PV) panel system because traditional Maximum Power Point Tracking (MPPT) techniques such as Incremental Conductance (INC) and Perturb and Observe (P&Q) are unable to track the GMPP under varying weather conditions. Literature (K. Y. Yap et al., 2020) has shown that most AIbased MPPT algorithms have a faster convergence time, reduced steady-state oscillation, and higher efficiency but need a lot of processing and are expensive to implement. However, hybrid MPPT has been shown to have a good performance-to-complexity ratio. It incorporates the benefits of traditional and AI-based MPPT methodologies but choosing the appropriate hybrid MPPT techniques is still a challenge since each has advantages and disadvantages. In this research work, we proposed a suitable hybrid AI-based MPPT technique that exhibited the right balance between performance and complexity when utilizing AI in MPPT for solar power system optimization. To achieve this, we looked at the basic concept of maximum power point tracking and compared some AI-based MPPT algorithms for GMPP estimation. After evaluating and comparing these approaches, the most practical and effective ones were chosen, modeled, and simulated in MATLAB Simulink to demonstrate the method\u27s correctness and dependability in estimating GMPP under various solar irradiation and PV cell temperature values. The AI-based MPPT techniques evaluated include Particle Swarm Optimization (PSO) trained Adaptive Neural Fuzzy Inference System (ANFIS) and PSO trained Neural Network (NN) MPPT. We compared these methods with Genetic Algorithm (GA)-trained ANFIS method. Simulation results demonstrated that the investigated technique could track the GMPP of the PV system and has a faster convergence time and more excellent stability. Lastly, we investigated the suitability of Buck, Boost, and Buck-Boost converter topologies for hybrid AI-based MPPT in solar energy systems under varying solar irradiance and temperature conditions. The simulation results provided valuable insights into the efficiency and performance of the different converter topologies in solar energy systems employing hybrid AI-based MPPT techniques. The Boost converter was identified as the optimal topology based on the results, surpassing the Buck and Buck-Boost converters in terms of efficiency and performance. Keywords—Maximum Power Point Tracking (MPPT), Genetic Algorithm, Adaptive Neural-Fuzzy Interference System (ANFIS), Particle Swarm Optimization (PSO

Analysis and Development of Computational Intelligence based Navigational Controllers for Multiple Mobile Robots

Navigational path planning problems of the mobile robots have received considerable attention over the past few decades. The navigation problem of mobile robots are consisting of following three aspects i.e. locomotion, path planning and map building. Based on these three aspects path planning algorithm for a mobile robot is formulated, which is capable of finding an optimal collision free path from the start point to the target point in a given environment. The main objective of the dissertation is to investigate the advanced methodologies for both single and multiple mobile robots navigation in highly cluttered environments using computational intelligence approach. Firstly, three different standalone computational intelligence approaches based on the Adaptive Neuro-Fuzzy Inference System (ANFIS), Cuckoo Search (CS) algorithm and Invasive Weed Optimization (IWO) are presented to address the problem of path planning in unknown environments. Next two different hybrid approaches are developed using CS-ANFIS and IWO-ANFIS to solve the mobile robot navigation problems. The performance of each intelligent navigational controller is demonstrated through simulation results using MATLAB. Experimental results are conducted in the laboratory, using real mobile robots to validate the versatility and effectiveness of the proposed navigation techniques. Comparison studies show, that there are good agreement between them. During the analysis of results, it is noticed that CS-ANFIS and IWO-ANFIS hybrid navigational controllers perform better compared to other discussed navigational controllers. The results obtained from the proposed navigation techniques are validated by comparison with the results from other intelligent techniques such as Fuzzy logic, Neural Network, Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Ant Colony Optimization (ACO) and other hybrid algorithms. By investigating the results, finally it is concluded that the proposed navigational methodologies are efficient and robust in the sense, that they can be effectively implemented to solve the path optimization problems of mobile robot in any complex environment