Multi-Wire Tri-Gate Silicon Nanowires Reaching Milli-pH Unit Resolution in One Micron Square Footprint

The signal-to-noise ratio of planar ISFET pH sensors deteriorates when reducing the area occupied by the device, thus hampering the scalability of on-chip analytical systems which detect the DNA polymerase through pH measurements. Top-down nano-sized tri-gate transistors, such as silicon nanowires, are designed for high performance solid-state circuits thanks to their superior properties of voltage-to-current transduction, which can be advantageously exploited for pH sensing. A systematic study is carried out on rectangular-shaped nanowires developed in a complementary metal-oxide-semiconductor (CMOS)-compatible technology, showing that reducing the width of the devices below a few hundreds of nanometers leads to higher charge sensitivity. Moreover, devices composed of several wires in parallel further increase the exposed surface per unit footprint area, thus maximizing the signal-to-noise ratio. This technology allows a sub milli-pH unit resolution with a sensor footprint of about 1 \ub5m2, exceeding the performance of previously reported studies on silicon nanowires by two orders of magnitude

Through Silicon Via Field-Effect Transistor with Hafnia-based Ferroelectrics and the Doping of Silicon by Gallium Implantation Utilizing a Focused Ion Beam System

3-dimensional integration has become a standard to further increase the transistor density and to enhance the integrated functionality in microchips. Integrated circuits are stacked on top of each other and copper-filled through-silicon VIAs (TSVs) are the industry-accepted choice for their vertical electrical connection. The aim of this work is to functionalize the TSVs by implementing vertical field-effect transistors inside the via holes. The front and back sides of 200 ... 300 µm thin silicon wafers were doped to create the source/drain regions of n- and p-FETs. The TSVFETs showed very stable saturation currents and on/off current ratios of about 10^6 (n-TSVFET) and 10^3 (p-TSVFET) for a gate voltage magnitude of 4V. The use of hafnium zirconium oxide on a thin SiO_2 interface layer as gate dielectric material in a p-TSVFET, enabled the implementation of a charge trapping memory inside the TSVs, showing a memory window of about 1V. This allows the non-volatile storage of the transistor on/off state. In addition, the demonstration of the use of gallium as the source/drain dopant in planar p-FET test structures (ion implanted from a focused ion beam tool) paves the way for maskless doping and for a process flow with a low thermal budget. It was shown, that ion implanted gallium can be activated and annealed at relatively low temperatures of 500 °C ... 700 °C.:Abstract / Kurzzusammenfassung Danksagung Index I List of Figures III List of Tables X List of Symbols XI List of Abbreviations XV 1 Introduction 1 2 Fundamentals 5 2.1 Metal Oxide Semiconductor Field Effect Transistors (MOSFETs) 5 2.1.1 Historical Development - Technological Advancements 7 2.1.2 Field-Effect Transistors in Semiconductor Memories 10 2.2 3D Integration and the Use of TSVs (Through Silicon VIAs) 16 2.3 Doping of Silicon 19 2.3.1 Doping by Thermal Diffusion 20 2.3.2 Doping by Ion Implantation 22 3 Electrical Characterization 24 3.1 Resistivity Measurements 24 3.1.1 Resistance Determination by Four-Point Probes Measurement 24 3.1.2 Contact Resistivity 27 3.1.3 Doping Concentration 32 3.2 C-V Measurements 35 3.2.1 Fundamentals of MIS C-V Measurements 35 3.2.2 Interpretation of C-V Measurements 37 3.3 Transistor Measurements 41 3.3.1 Output Characteristics (I_D-V_D) 41 3.3.2 Transfer Characteristics (I_D-V_G) 42 4 TSV Transistor 45 4.1 Idea and Motivation 45 4.2 Design and Layout of the TSV Transistor 47 4.2.1 Design of the TSV Transistor Structures 47 4.2.2 Test Structures for Planar FETs 48 5 Variations in the Integration Scheme of the TSV Transistor 51 5.1 Doping by Diffusion from Thin Films 51 5.1.1 Determination of Doping Profiles 52 5.1.2 n- and p- TSVFETs Doped Manufactures by the Use of the Diffusion Technique 59 5.2 Ferroelectric Hafnium-Zirconium-Oxide (HZO) in the Gate Stack 81 5.2.1 Planar ferroelectric p-MOSFETs Doped by Thermal Diffusion 82 5.2.2 p-TSVFETs with Hafnium-Zirconium-Oxide Metal Gate 90 5.3 Doping by Ion Implantation of Gallium with a Focused Ion Beam (FIB) Tool 96 5.3.1 Ga doped Si Diodes 97 5.3.2 Planar p-MOSFETs Doped by Ga Implantation 108 5.3.3 Proposal for a parallel integration of Cu TSVs and p-TSVFETs 117 6 Summary and Outlook 120 Bibliography XVIII A Appendix XXXVI A.1 Resistivity and Dopant Density XXXVI A.2 Mask set for the TSVFET XXXVII A.3 Mask Design of the Planar Test Structures XXXVIII Curriculum Vitae XXXIX List of Scientific Publications XL

Caractérisation électrique et modélisation du transport dans matériaux et dispositifs SOI avancés

This thesis is dedicated to the electrical characterization and transport modeling in advanced SOImaterials and devices for ultimate micro-nano-electronics. SOI technology is an efficient solution tothe technical challenges facing further downscaling and integration. Our goal was to developappropriate characterization methods and determine the key parameters. Firstly, the conventionalpseudo-MOSFET characterization was extended to heavily-doped SOI wafers and an adapted modelfor parameters extraction was proposed. We developed a nondestructive electrical method to estimatethe quality of bonding interface in metal-bonded wafers for 3D integration. In ultra-thin fully-depletedSOI MOSFETs, we evidenced the parasitic bipolar effect induced by band-to-band tunneling, andproposed new methods to extract the bipolar gain. We investigated multiple-gate transistors byfocusing on the coupling effect in inversion-mode vertical double-gate SOI FinFETs. An analyticalmodel was proposed and subsequently adapted to the full depletion region of junctionless SOI FinFETs.We also proposed a compact model of carrier profile and adequate parameter extraction techniques forjunctionless nanowires.Cette thèse est consacrée à la caractérisation et la modélisation du transport électronique dans des matériaux et dispositifs SOI avancés pour la microélectronique. Tous les matériaux innovants étudiés(ex: SOI fortement dopé, plaques obtenues par collage etc.) et les dispositifs SOI sont des solutions possibles aux défis technologiques liés à la réduction de taille et à l'intégration. Dans ce contexte,l'extraction des paramètres électriques clés, comme la mobilité, la tension de seuil et les courants de fuite est importante. Tout d'abord, la caractérisation classique pseudo-MOSFET a été étendue aux plaques SOI fortement dopées et un modèle adapté pour l'extraction de paramètres a été proposé. Nous avons également développé une méthode électrique pour estimer la qualité de l'interface de collage pour des plaquettes métalliques. Nous avons montré l'effet bipolaire parasite dans des MOSFET SOI totalement désertés. Il est induit par l’effet tunnel bande-à-bande et peut être entièrement supprimé par une polarisation arrière. Sur cette base, une nouvelle méthode a été développée pour extraire le gain bipolaire. Enfin, nous avons étudié l'effet de couplage dans le FinFET SOI double grille, en mode d’inversion. Un modèle analytique a été proposé et a été ensuite adapté aux FinFETs sans jonction(junctionless). Nous avons mis au point un modèle compact pour le profil des porteurs et des techniques d’extraction de paramètres