Comparative Analysis among DSP and FPGA-based Control Capabilities in PWM Power Converters

PWM power converters are close to be mature for standard diffusion. New FPGA technologies could now realise at best the digital control key-points: flexible performance and time to market. The paper deals with the new digital control properties of FPGA-based techniques. On the basis of reference structures, a comparative analysis is carried-out trading-off dynamic performances and immunity to PWM environment. All possible sampled control or DSP techniques are firstly analysed and compared to each other. A breakthrough concept for FPGAs is defined, definitely solving for PWM feedback immunity by practical over-sampling and parallel processing while improving dynamic performances. Simulation tests and the application of dead-beat control clearly point-out the respective dynamic properties

Multilevel Converters: An Enabling Technology for High-Power Applications

| Multilevel converters are considered today as the state-of-the-art power-conversion systems for high-power and power-quality demanding applications. This paper presents a tutorial on this technology, covering the operating principle and the different power circuit topologies, modulation methods, technical issues and industry applications. Special attention is given to established technology already found in industry with more in-depth and self-contained information, while recent advances and state-of-the-art contributions are addressed with useful references. This paper serves as an introduction to the subject for the not-familiarized reader, as well as an update or reference for academics and practicing engineers working in the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386

Integrating renewable energy with conventional power grid

This study is manly introducing a modified integrating method which is much suitable for smart grids. In smart grid the integration between the outputs of the renewable energy sources, such as solar energy, wind energy and the conventional power sources takes place. This integration may affect the power quality negatively; therefore, some considerations should be taken into account, i.e., the power magnitude, phase, and frequency should be synchronized, and be identical during the entire time of integration between the two different sources of power, the renewable energy source and the conventional power grid. To ensure this matching, Matlab/Simulink simulation and prototype were proposed to produce the optimum values of the previous parameters (power magnitude, phase, and frequency). M file was written to choose the optimum value for the Boost converter component. The verification of DC to AC model and parameters was accomplished by Matlab /Simulink simulation. PWM codes were written to drive the Boost converter and the DC to AC inverter. Moreover, a prototype was implemented and tested

Modelling, simulation and control of photovoltaic converter systems

The thesis follows the development of an advanced solar photovoltaic power conversion system from first principles. It is divided into five parts. The first section shows the development of a circuit-based simulation model of a photovoltaic (PV) cell within the 'SABER' simulator environment. Although simulation models for photovoltaic cells are available these are usually application specific, mathematically intensive and not suited to the development of power electronics. The model derived within the thesis is a circuit-based model that makes use of a series of current/voltage data sets taken from an actual cell in order to define the relationships between the cell double-exponential model parameters and the environmental parameters of temperature and irradiance. Resulting expressions define a 'black box' model, and the power electronics designer may simply specify values of temperature and irradiance to the model, and the simulated electrical connections to the cell provide the appropriate I/V characteristic. The second section deals with the development of a simulation model of an advanced PVaware DC-DC converter system. This differs from the conventional in that by using an embedded maximum power tracking system within a conventional linear feedback control arrangement it addresses the problem of loads which may not require the level of power available at the maximum power point, but is also able to drive loads which consistently require a maximum power feed such as a grid-coupled inverter. The third section details a low-power implementation of the above system in hardware. This shows the viability of the new, fast embedded maximum power tracking system and also the advantages of the system in terms of speed and response time over conventional systems. The fourth section builds upon the simulation model developed in the second section by adding an inverter allowing AC loads (including a utility) to be driven. The complete system is simulated and a set of results obtained showing that the system is a usable one. The final section describes the construction and analysis of a complete system in hardware (c. 500W) and identifies the suitability of the system to appropriate applications

Model Based Design Environment for the Embedded System Case Study: Inverter Power Supply

学位記番号：工博甲43

POWER QUALITY CONTROL AND COMMON-MODE NOISE MITIGATION FOR INVERTERS IN ELECTRIC VEHICLES

Inverters are widely utilized in electric vehicle (EV) applications as a major voltage/current source for onboard battery chargers (OBC) and motor drive systems. The inverter performance is critical to the efficiency of EV system energy conversion and electronics system electro-magnetic interference (EMI) design. However, for AC systems, the bandwidth requirement is usually low compared with DC systems, and the control impact on the inverter differential-mode (DM) and common-mode (CM) performance are not well investigated. With the wide-band gap (WBG) device era, the switching capability of power electronics devices drastically improved. The DM/CM impact that was brought by the WBG device-based inverter becomes more serious and has not been completely understood. This thesis provides an in-depth analysis of on-board inverter control strategies and the corresponding DM/CM impact on the EV system. The OBC inverter control under vehicle-to-load (V2L) mode will be documented first. A virtual resistance damping method minimizes the nonlinear load harmonics, and a neutral balancing method regulates the unbalanced load impact through the fourth leg. In the motor drive system, a generalized CM voltage analytical model and a current ripple prediction model are built for understanding the system CM and DM stress with respect to different modulation methods, covering both 2-level and 3-level topologies. A novel CM EMI damping modulation scheme is proposed for 6-phase inverter applications. The performance comparison between the proposed methods and the conventional solution is carried out. Each topic is supported by the corresponding hardware platform and experimental validation

Dynamic Modelling and Control Design of Advanced Photovoltaic Solar System for Distributed Generation Applications

Presently, grid-connected photovoltaic (PV) solar systems are becoming the most important application of PV systems. This trend is being increased because of the many benefits of using renewable energy sources (RES) in modern distributed (or dispersed) generation (DG) systems. This electrical grid structure imposes on the distributed generator new requirements of high quality electric power, flexibility, efficiency and reliability. This paper proposes a novel high performance power conditioning system (PCS) of a three-phase grid-connected PV system and its control scheme for applications in DG systems. The PCS utilizes a two-stage energy conversion system topology composed of a DC/DC boost converter and a diode-clamped three-level voltage source inverter (VSI) that satisfies all the stated requirements. The model of the proposed PV array uses theoretical and empirical equations together with data provided by manufacturer of PV panels, solar radiation and cell temperature among others variables, in order to accurately predict the current-voltage curve. Moreover, based on the state-space averaging method a new three-level control scheme is designed, comprising a full decoupled current control strategy in the synchronous-rotating d-q frame, capable of simultaneously and independently exchanging both active and reactive powers with the distribution system. Validation of models and control algorithms is carried out through digital simulations using the MATLAB/Simulink environment and implementing a 250 Wp PV experimental set-up.Fil: Molina, Marcelo Gustavo. Universidad Nacional de San Juan. Facultad de Ingeniería. Instituto de Energía Eléctrica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Juan; ArgentinaFil: Juanico, Luis Eduardo. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics

The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future