Optimização de recursos para difusão em redes de próxima geração

Doutoramento em ElectrotecniaEsta tese aborda o problema de optimização de recursos de rede, na entrega de Serviços de Comunicação em Grupo, em Redes de Próxima Geração que suportem tecnologias de difusão. De acordo com esta problemática, são feitas propostas que levam em atenção a evolução espectável das redes 3G em Redes Heterogéneas de Próxima Geração que incluam tecnologias de difusão tais como o DVB. A optimização de recursos em Comunicações em Grupo é apresentada como um desafio vertical que deve cruzar diversas camadas. As optimizações aqui propostas cobrem tanto a interface entre Aplicação e a Plataforma de Serviços para a disponibilização de serviços de comunicação em grupo, como as abstracções e mapeamentos feitos na interface entre a Rede Central e a Rede de Acesso Rádio. As optimizações propostas nesta tese, assumem que o caminho evolutivo na direcção de uma Rede de Próxima Geração é feito através do IP. Em primeiro lugar são endereçadas as optimizações entre a Aplicação e a Plataforma de Serviços que já podem ser integradas nas redes 3G existentes. Estas optimizações podem potenciar o desenvolvimento de novas e inovadoras aplicações, que através do uso de mecanismos de distribuição em difusão podem fazer um uso mais eficiente dos recursos de rede. De seguida são apresentadas optimizações ao nível da interface entre a Rede Central e a Rede de Acesso Rádio que abordam a heterogeneidade das redes futuras assim como a necessidade de suportar tecnologias de difusão. É ainda considerada a possibilidade de aumentar a qualidade de serviço de serviços de difusão através do mapeamento do IP multicast em portadoras unidireccionais. Por forma a validar todas estas optimizações, vários protótipos foram desenvolvidos com base num router avançado para redes de acesso de próxima geração. As funcionalidades e arquitectura de software desse router são também aqui apresentadas.This thesis addresses the problem of optimizing network resource usage, for the delivery of Group Services, in Next Generation Networks featuring broadcast technologies. In this scope, proposals are made according to the expected evolution of 3G networks into Next Generation Heterogeneous Networks that include broadcast technologies such as DVB. Group Communication resource optimization is considered a vertical challenge that must cross several layers. The optimizations here proposed cover both Application to Service Platform interfaces for group communication services, and Core Network to Radio Access Network interface abstractions and mappings. The proposed optimizations are also presented taking into consideration network evolution path towards an All-IP based Next Generation Network. First it is addressed the Application to Service Platform optimization, which can already be deployed over 3G networks. This optimization could potentiate the development of new and innovative applications that through the use of broadcast/multicast service delivery mechanisms could be more efficient network wise. Next proposals are made on the Core Network to Radio Access Network interfaces that address the heterogeneity of future networks and consider the need to support broadcast networks. It is also considered the possibility to increase the Quality of Service of broadcast/multicast services based on the dynamic mapping of IP multicast into unicast radio bearers. In order to validate these optimizations, several prototypes were built based on an advanced access router for next generation networks. Such access router functionalities and software architecture are also presented here

EVEREST IST - 2002 - 00185 : D23 : final report

Deliverable públic del projecte europeu EVERESTThis deliverable constitutes the final report of the project IST-2002-001858 EVEREST. After its successful completion, the project presents this document that firstly summarizes the context, goal and the approach objective of the project. Then it presents a concise summary of the major goals and results, as well as highlights the most valuable lessons derived form the project work. A list of deliverables and publications is included in the annex.Postprint (published version

Infrastructure sharing of 5G mobile core networks on an SDN/NFV platform

When looking towards the deployment of 5G network architectures, mobile network operators will continue to face many challenges. The number of customers is approaching maximum market penetration, the number of devices per customer is increasing, and the number of non-human operated devices estimated to approach towards the tens of billions, network operators have a formidable task ahead of them. The proliferation of cloud computing techniques has created a multitude of applications for network services deployments, and at the forefront is the adoption of Software-Defined Networking (SDN) and Network Functions Virtualisation (NFV). Mobile network operators (MNO) have the opportunity to leverage these technologies so that they can enable the delivery of traditional networking functionality in cloud environments. The benefit of this is reductions seen in the capital and operational expenditures of network infrastructure. When going for NFV, how a Virtualised Network Function (VNF) is designed, implemented, and placed over physical infrastructure can play a vital role on the performance metrics achieved by the network function. Not paying careful attention to this aspect could lead to the drastically reduced performance of network functions thus defeating the purpose of going for virtualisation solutions. The success of mobile network operators in the 5G arena will depend heavily on their ability to shift from their old operational models and embrace new technologies, design principles and innovation in both the business and technical aspects of the environment. The primary goal of this thesis is to design, implement and evaluate the viability of data centre and cloud network infrastructure sharing use case. More specifically, the core question addressed by this thesis is how virtualisation of network functions in a shared infrastructure environment can be achieved without adverse performance degradation. 5G should be operational with high penetration beyond the year 2020 with data traffic rates increasing exponentially and the number of connected devices expected to surpass tens of billions. Requirements for 5G mobile networks include higher flexibility, scalability, cost effectiveness and energy efficiency. Towards these goals, Software Defined Networking (SDN) and Network Functions Virtualisation have been adopted in recent proposals for future mobile networks architectures because they are considered critical technologies for 5G. A Shared Infrastructure Management Framework was designed and implemented for this purpose. This framework was further enhanced for performance optimisation of network functions and underlying physical infrastructure. The objective achieved was the identification of requirements for the design and development of an experimental testbed for future 5G mobile networks. This testbed deploys high performance virtualised network functions (VNFs) while catering for the infrastructure sharing use case of multiple network operators. The management and orchestration of the VNFs allow for automation, scalability, fault recovery, and security to be evaluated. The testbed developed is readily re-creatable and based on open-source software

A Cross-System Approach for Multimedia Services with IP Multicast in 4G Networks

The increased demand for multimedia services by mobile end users in recent years have driven both Broadcast and Wireless Network operators to develop new systems and architectures for the deployment of such services. The proposed solutions are nonetheless limited either in terms of QoS or Capabilities to deliver new interactive services. This paper highlights strengths and drawbacks of the existing technologies in terms of QoS, Security and Mobility. In order to fill the gap between current solutions we propose a new architecture that builds itself on the synergies created by a heterogeneous network made of existing delivering technologies, such as 3GPP/MBMS and DVB, where services can be delivered to end-users in the most appropriate way for end-users and operators alike. A prototype implementation is further described.EU project - IST-2002- 506997 Daidalos I

Design and implementation of a traffic control framework in Firefox OS

Today's smartphones include a rich feature-set as well as various wireless interfaces that provide extra services rather than just voice communication or messaging, as it occurred with traditional mobile phones. Additionally, the widespread use of mobile devices using Third Generation (3G) and Long Term Evolution (LTE) networks has led to the development of various applications (apps) that take advantage of the always-on Internet connectivity provided by these networks (e.g. instant messaging and social network services). Unlike traditional Internet apps (e.g. web surfing and file transfer), the emerging apps that rely on always-on connectivity are often constantly running in the background to receive messages and status updates. This behavior causes that apps continuously generate short app signaling messages such as keep-alive and ping requests to maintain the always-on connectivity. Although the traffic volume of keep-alive messages is not large, frequent short messages can incur a large amount of related signaling traffic in the mobile network. In 3G or LTE networks, the User Equipment (UE) and the Radio Access Network (RAN) keep the Radio Resource Control (RRC) states. The UE stays in Connected mode when it transmits or receives data during active periods and stays in Idle mode during inactive periods. To send even a small data packet, the UE changes the state to the Connected mode prior to transmission. This radio state change generates a lot of network signaling messages, resulting in a rapid increase in traffic loading. Large amounts of network signaling traffic leads to two major problems: rapid drainage of the mobile device's battery and a signaling traffic surge in the mobile network. Since the air interface is a spare resource and the traffic for mobile end devices will grow enormously, it is important that the wireless resources are used in the most efficient way. However, this is not true for current networks as there is not alignment between devices, apps and the network.This document proposes a traffic control framework which acts as an interface between the apps and the network and allows the network operator to aggregate packets prior to transmission. The aggregated packets are sent out at once after a configurable amount of time which means for instance that resources on the wireless link have to be reserved only once for a number of app signaling packets and not for each packet separately. By this the packet transmission will be bursty which will improve network efficiency as the amount of signaling messages is minimized. In addition, battery runtime is improved as lower signaling overhead will reduce the activity time and energy consumption within devices.Hoy en día los smartphones incorporan un amplio conjunto de utilidades, así como varias interfaces inalámbricas que proporcionan servicios adicionales a los ofrecidos por los teléfonos móviles convencionales. Por otra parte, el uso generalizado de las redes 3G y LTE ha originado el desarrollo de numerosas aplicaciones que aprovechan las ventajas que ofrecen dichas redes, un ejemplo son las aplicaciones de redes sociales. Estas aplicaciones, a diferencia de otras como la navegación web o la descarga de archivos, están constantemente ejecutándose en segundo plano y recibiendo notificaciones de actualización de estado. Este comportamiento propicia el intercambio de pequeños mensajes de señalización para mantener la conexión, tales como mensajes "keep alive" o "ping requests". A pesar de que el volumen de estos mensajes no es elevado, su constante intercambio puede ocasionar una gran cantidad de tráfico de señalización en la red. En las redes 3G o LTE, el equipo de usuario (UE) y la red de acceso radio terrestre (RAN) mantienen los estados RRC. El equipo de usuario permanece en el estado activo cuando transmite o recibe datos y retorna al estado de reposo durante los periodos inactivos. El envío de un pequeño paquete de datos supone la transición desde el estado de reposo al estado activo. Este comportamiento genera muchos mensajes de señalización e implica un rápido incremento en el tráfico de la red. Este incremento del tráfico de señalización ocasiona dos grandes problemas: la sobrecarga de la red y un impacto negativo en el consumo de batería de los dispositivos móviles. Es de vital importancia que se haga un uso eficiente de los recursos de red, ya que el aire, en este caso el canal de comunicación, es un medio compartido. Además, se espera que el tráfico generado por los dispositivos móviles crezca enormemente en los próximos años. Las redes móviles actuales no son utilizadas de un modo eficiente debido a la falta de interacción entre la red, los dispositivos móviles y las aplicaciones. Este documento presenta una plataforma de control de tr a co que actúa como interfaz entre las aplicaciones y la red, permitiendo al operador de red agregar los paquetes antes de su transmisión. Esto permite, por ejemplo, que los recursos de red sean reservados s olo una vez para la ráfaga de paquetes y no para cada paquete individualmente, lo cual minimiza la cantidad de mensajes de señalización. Esta propuesta no sólo ayuda a mejorar la eficiencia de la red, sino que además optimiza el uso de la batería, ya que una disminución del tráfico de señalización provoca una reducción del tiempo de actividad y consumo de energía de los dispositivos móviles.Ingeniería Telemátic

A software defined networking solution for on-demand base station wake-up in softwarized LTE systems

LTE is a standard offering high speed wireless communication, and it is a major milestone towards flourishing the capabilities of 5th generation (5G) mobile networks to meet the exploding traffic growth in the current and future Internet. However, the introduction of new devices and smartphones is creating many challenges to the LTE operators, and one of the most significant challenges is to control the load on the LTE eNB base stations. In the meantime, operators look for ways to reduce their energy consumptions, for which putting the no- or low-throughput base stations to sleep is a promising solution. Therefore, this project is designed to provide a solution, which would detect congestion in the Radio Access part of LTE network and remotely wake up base stations in the congestion zones. If a congestion is detected at one eNB, a nearby eNB that had been put to sleep (for reasons of energy conservation, reduction of interferences, etc.) is woken up. We provide two implementations of this Congestion-aware On-demand eNB Wake-up (COEW) solution: a deployment of traditional LTE network using a softwarized LTE implementation, consisting of EPC and eNB implementations on different machines. The second implementation is based on Software Defined Networking (SDN), which is then integrated to the traditional network setup. For this, Open vSwitch (OVS) is used on eNBs and EPC machines, in order to have the congestion information to be collected by the SDN controller using OpenFlow protocol. SDN controller (based on OpenDayLight-ODL) communicates with COEW Application via Northbound plugins. COEW application then analyzes the data from each eNB and wakes up sleeping eNB remotely. Validation of the two COEW solutions have been done through physical experiments using commercial UEs and aforementioned community-driven SDN software components

Terminal LTE flexível

Mstrado em Engenharia Eletrónica e TelecomunicaçõesAs redes móveis estão em constante evolução. A geração atual (4G) de redes celulares de banda larga e representada pelo standard Long Term Evolution (LTE), definido pela 3rd Generation Partnership Project (3GPP). Existe uma elevada procura/uso da rede LTE, com um aumento exponencial do número de dispositivos móveis a requerer uma ligação à Internet de alto débito. Isto pode conduzir à sobrelotação do espetro, levando a que o sinal tenha que ser reforçado e a cobertura melhorada em locais específicos, tal como em grandes conferências, festivais e eventos desportivos. Por outro lado, seria uma vantagem importante se os utilizadores pudessem continuar a usar os seus equipamentos e terminais em situações onde o acesso a redes 4G é inexistente, tais como a bordo de um navio, eventos esporádicos em localizações remotas ou em cenários de catástrofe, em que as infraestruturas que permitem as telecomunicações foram danificadas e a cobertura temporária de rede pode ser decisiva em processos de salvamento. Assim sendo, existe uma motivação clara por trás do desenvolvimento de uma infraestrutura celular totalmente reconfigurável e que preencha as características mencionadas anteriormente. Uma possível abordagem consiste numa plataforma de rádio definido por software (SDR), de código aberto, que implementa o standard LTE e corre em processadores de uso geral (GPPs), tornando possível construir uma rede completa investindo somente em hardware - computadores e front-ends de radiofrequência (RF). Após comparação e análise de várias plataformas LTE de código aberto foi selecionado o OpenAirInterface (OAI) da EURECOM, que disponibiliza uma implementação compatível com a Release 8.6 da 3GPP (com parte das funcionalidades da Release 10). O principal objectivo desta dissertação é a implementação de um User Equipment (UE) flexível, usando plataformas SDR de código aberto que corram num computador de placa única (SBC) compacto e de baixa potência, integrado com um front-end de RF - Universal Software Radio Peripheral (USRP). A transmissão de dados em tempo real usando os modos de duplexagem Time Division Duplex (TDD) e Frequency Division Duplex (FDD) é suportada e a reconfiguração de certos parâmetros é permitida, nomeadamente a frequência portadora, a largura de banda e o número de Resource Blocks (RBs) usados. Além disso, é possível partilhar os dados móveis LTE com utilizadores que estejam próximos, semelhante ao que acontece com um hotspot de Wi-Fi. O processo de implementação é descrito, incluindo todos os passos necessários para o seu desenvolvimento, englobando o port do UE de um computador para um SBC. Finalmente, a performance da rede é analisada, discutindo os valores de débitos obtidos.Mobile networks are constantly evolving. 4G is the current generation of broadband cellular network technology and is represented by the Long Term Evolution (LTE) standard, de ned by 3rd Generation Partnership Project (3GPP). There's a high demand for LTE at the moment, with the number of mobile devices requiring an high-speed Internet connection increasing exponentially. This may overcrowd the spectrum on the existing deployments and the signal needs to be reinforced and coverage improved in speci c sites, such as large conferences, festivals and sport events. On the other hand, it would be an important advantage if users could continue to use their equipment and terminals in situations where cellular networks aren't usually available, such as on board of a cruise ship, sporadic events in remote locations, or in catastrophe scenarios in which the telecommunication infrastructure was damaged and the rapid deployment of a temporary network can save lives. In all of these situations, the availability of exible and easily deployable cellular base stations and user terminals operating on standard or custom bands would be very desirable. Thus, there is a clear motivation for the development of a fully recon gurable cellular infrastructure solution that ful lls these requirements. A possible approach is an open-source, low-cost and low maintenance Software-De ned Radio (SDR) software platform that implements the LTE standard and runs on General Purpose Processors (GPPs), making it possible to build an entire network while only spending money on the hardware itself - computers and Radio-Frequency (RF) front-ends. After comparison and analysis of several open-source LTE SDR platforms, the EURECOM's OpenAirInterface (OAI) was chosen, providing a 3GPP standard-compliant implementation of Release 8.6 (with a subset of Release 10 functionalities). The main goal of this dissertation is the implementation of a exible opensource LTE User Equipment (UE) software radio platform on a compact and low-power Single Board Computer (SBC) device, integrated with an RF hardware front-end - Universal Software Radio Peripheral (USRP). It supports real-time Time Division Duplex (TDD) and Frequency Division Duplex (FDD) LTE modes and the recon guration of several parameters, namely the carrier frequency, bandwidth and the number of LTE Resource Blocks (RB) used. It can also share its LTE mobile data with nearby users, similarly to a Wi-Fi hotspot. The implementation is described through its several developing steps, including the porting of the UE from a regular computer to a SBC. The performance of the network is then analysed based on measured results of throughput

Integrating Base Stations with a Software Defined Core Network

An unprecedented increase is expected in the demand for mobile data traffic, which requires significant changes in the access network. On the one hand, the penetration of new technologies and networks such as Internet of Things (IoT) introduces a large amount of additional traffic of different kinds. On the other hand, the cell size will be reduced, which results in a higher number of base stations that need to be deployed, requiring additional investments by operators. This thesis proposes the integration of base stations with a software-defined core network as a way to make the access network more cost-effective, scalable and flexible. Virtualisation technologies allow the possibility of deploying network nodes using generic, off-the-shelf IT hardware, therefore reducing costs thanks to the application of economies of scale. This thesis implements a virtualised solution for LTE network’s access node, eNodeB. It will be shown that virtualisation also presents additional benefits in terms of network orchestration and scalability. The result of the thesis can initially be used as a part of a simulated end to end SDN controlled mobile network, allowing the modification of user plane protocol stack. It can be later integrated with a software defined radio component and used with radioheads to form full SDN style base stations e.g. for a 5G test network

A methodology for obtaining More Realistic Cross-Layer QoS Measurements in mobile networks: A VoIP over LTE Use Case

Los servicios de voz han sido durante mucho tiempo la primera fuente de ingresos para los operadores móviles. Incluso con el protagonismo creciente del tráfico de datos, los servicios de voz seguirán jugando un papel importante y no desaparecerán con la transición a redes basadas en el protocolo IP. Por otra parte, hace años que los principales actores en la industria móvil detectaron claramente que los usuarios no aceptarían una degradación en la calidad de los servicios de voz. Es por esto que resulta crítico garantizar la experiencia de usuario (QoE) en la transición a redes de nueva generación basadas en conmutación de paquetes. El trabajo realizado durante esta tesis ha buscado analizar el comportamiento y las dependencias de los diferentes servicios de Voz sobre IP (VoIP), así como identificar configuraciones óptimas, mejoras potenciales y metodologías que permitan asegurar niveles de calidad aceptables al mismo tiempo que se trate de minimizar los costes. La caracterización del rendimiento del tráfico de datos en redes móviles desde el punto de vista de los usuarios finales es un proceso costoso que implica la monitorización y análisis de un amplio rango de protocolos y parámetros con complejas dependencias. Para abordar desde la raíz este problema, se requiere realizar medidas que relacionen y correlen el comportamiento de las diferentes capas. La metodología de caracterización propuesta en esta tesis proporciona la posibilidad de recoger información clave para la resolución de problemas en las comunicaciones IP, relaciolándola con efectos asociados a la propagación radio, como cambios de celda o pérdida de enlaces, o con carga de la red y limitaciones de recursos en zonas geográficas específicas. Dicha metodología se sustenta en la utilización de herramientas nativas de monitorización y registro de información en smartphones, y la aplicación de cadenas de herramientas para la experimentación extensiva tanto en redes reales y como en entornos de prueba controlados. Con los resultados proporcionados por esta serie de herramientas, tanto operadores móviles y proveedores de servicio como desarrolladores móviles podrían ganar acceso a información sobre la experiencia real del usuario y sobre cómo mejorar la cobertura, optimizar los servicios y adaptar el funcionamiento de las aplicaciones y el uso de protocolos móviles basados en IP en este contexto. Las principales contribuciones de las herramientas y métodos introducidos en esta tesis son los siguientes: - Una herramienta de monitorización multicapa para smartphones Android, llamada TestelDroid, que permite la captura de indicadores clave de rendimiento desde el propio equipo de usuario. Asimismo proporciona la capacidad de generar tráfico de forma activa y de verificar el estado de alcanzabilidad del terminal, realizando pruebas de conectividad. - Una metodología de post-procesado para correlar la información presente en las diferentes capas de las medidas realizadas. De igual forma, se proporciona la opción a los usuarios de acceder directamente a la información sobre el tráfico IP y las medidas radio y de aplicar metodologías propias para la obtención de métricas. - Se ha realizado la aplicación de la metodología y de las herramientas usando como caso de uso el estudio y evaluación del rendimiento de las comunicaciones basadas en IP a bordo de trenes de alta velocidad. - Se ha contribuido a la creación de un entorno de prueba realista y altamente configurable para la realización de experimentos avanzados sobre LTE. - Se han detectado posibles sinergias en la utilización de instrumentación avanzada de I+D en el campo de las comunicaciones móviles, tanto para la enseñanza como para la investigación en un entorno universitario

Automotive Cognitive Access: Towards customized vehicular communication system

The evolution of Software Defined Networking (SDN) and Virtualization of mobile Network Functions (NFV) have enabled the new ways of managing mobile access systems and are seen as a major technological foundation of the Fifth Generation (5G) of mobile networks. With the appearance of 5G specifications, the mobile system architecture has the transition from a network of entities to a network of functions. This paradigm shift led to new possibilities and challenges. Existing mobile communication systems rely on closed and inflexible hardware-based architectures both at the access and core network. It implies significant challenges in implementing new techniques to maximize the network capacity, scalability and increasing performance for diverse data services. This work focuses preliminary on the architectural evolutions needed to solve challenges perceived for the next generation of mobile networks. I consider Software defined plus Virtualization featured Mobile Network (S+ MN) architecture as a baseline reference model, aiming at the further improvements to support the access requirements for diverse user groups. I consider an important class of things, vehicles, which needs efficient mobile internet access at both the system and application levels. I identify and describe key requirements of emerging vehicular communications and assess existing standards to determine their limitations. To provide optimized wireless communications for the specific user group, the 5G systems come up with network slicing as a potential solution to create customized networks. Network slicing has the capability to facilitates dynamic and efficient allocation of network resources and support diverse service scenarios and services. A network slice can be broadly defined as an end-to-end logically isolated network that includes end devices as well as access and core network functions. To this effect, I describe the enhanced behaviour of S+ MN architecture for the collection of network resources and details the potential functional grouping provided by S+ MN architecture that paves the way to support automotive slicing. The proposed enhancements support seamless connection mobility addressing the automotive access use case highly mobile environment. I follow the distribution of gateway functions to solve the problem of unnecessary long routes and delays. Exploiting the open SDN capabilities, the proposed S+ NC is able to parallelize the execution of certain control plane messages thus enabling the signalling optimisation. Furthermore, it enables the (Re)selection of efficient data plane paths with implied upper-layer service continuity mechanisms that remove the chains of IP address preservation for session continuity during IP anchor relocation. An implementation setup validates the proposed evolutions, including its core functionalities implemented using the ns-3 network simulator. The proposed slicing scheme has been evaluated through a number of scenarios such as numbers of signalling messages processed by control entities for an intersystem handover procedure relative to current mobile network architecture. I also perform the performance improvement analysis based on simulation results. Furthermore, I experimentally prove the feasibility of using Multipath TCP for connection mobility in intersystem handover scenario. The experiments run over the Linux Kernel implementation of Multipath TCP developed over the last years. I extend the Multipath TCP path management to delegates the management of the data paths according to the application needs. The implementation results have shown that the proposed S+ MN slicing architecture and enhancements achieve benefits in multiple areas, for example improving the mobility control and management, maintaining QoS, smooth handover, session continuity and efficient slice management and orchestration