Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Modelling, Dimensioning and Optimization of 5G Communication Networks, Resources and Services

This reprint aims to collect state-of-the-art research contributions that address challenges in the emerging 5G networks design, dimensioning and optimization. Designing, dimensioning and optimization of communication networks resources and services have been an inseparable part of telecom network development. The latter must convey a large volume of traffic, providing service to traffic streams with highly differentiated requirements in terms of bit-rate and service time, required quality of service and quality of experience parameters. Such a communication infrastructure presents many important challenges, such as the study of necessary multi-layer cooperation, new protocols, performance evaluation of different network parts, low layer network design, network management and security issues, and new technologies in general, which will be discussed in this book

Energy Efficient Network Function Virtualisation in 5G Networks

Once the dust settled around 4G, 5G mobile networks become the buzz word in the world of communication systems. The recent surge of bandwidth-greedy applications and the proliferation of smart phones and other wireless connected devices has led to an enormous increase in mobile traffic. Therefore, 5G networks have to deal with a huge number of connected devices of different types and applications, including devices running life-critical applications, and facilitate access to mobile resources easily. Therefore given the increase in traffic and number of connected devices, intelligent and energy efficient architectures are needed to adequately and sustainably meet these requirements. In this thesis network function virtualisation is investigated as a promising paradigm that can contribute to energy consumption reduction in 5G networks. The work carried out in this thesis considers the energy efficiency mainly in terms of processing power consumption and network power consumption. Furthermore, it considers the energy consumption reduction that can be achieved by optimising the locations of virtual machines running the mobile 5G network functions. It also evaluates the consolidation and pooling of the mobile resources. A framework was introduced to virtualise the mobile core network functions and baseband processing functions. Mixed integer linear programming optimisation models and heuristics were developed minimise the total power consumption. The impact of virtualisation in the 5G front haul and back haul passive optical network was investigated by developing MILP models to optimise the location of virtual machines. A further consideration is caching the contents close to the user and its impact on the total power consumption. The impact of a number of factor on the power consumption were investigated such as the total number of active users, the backhaul to the fronthaul traffic ratio, reduction/expansion in the traffic due to baseband processing, and the communication between virtual machines. Finally, the integration of network function virtualisation and content caching were introduced and their impact on improving the energy efficiency was investigated

Virtualisation and resource allocation in MECEnabled metro optical networks

The appearance of new network services and the ever-increasing network traffic and number of connected devices will push the evolution of current communication networks towards the Future Internet. In the area of optical networks, wavelength routed optical networks (WRONs) are evolving to elastic optical networks (EONs) in which, thanks to the use of OFDM or Nyquist WDM, it is possible to create super-channels with custom-size bandwidth. The basic element in these networks is the lightpath, i.e., all-optical circuits between two network nodes. The establishment of lightpaths requires the selection of the route that they will follow and the portion of the spectrum to be used in order to carry the requested traffic from the source to the destination node. That problem is known as the routing and spectrum assignment (RSA) problem, and new algorithms must be proposed to address this design problem. Some early studies on elastic optical networks studied gridless scenarios, in which a slice of spectrum of variable size is assigned to a request. However, the most common approach to the spectrum allocation is to divide the spectrum into slots of fixed width and allocate multiple, consecutive spectrum slots to each lightpath, depending on the requested bandwidth. Moreover, EONs also allow the proposal of more flexible routing and spectrum assignment techniques, like the split-spectrum approach in which the request is divided into multiple "sub-lightpaths". In this thesis, four RSA algorithms are proposed combining two different levels of flexibility with the well-known k-shortest paths and first fit heuristics. After comparing the performance of those methods, a novel spectrum assignment technique, Best Gap, is proposed to overcome the inefficiencies emerged when combining the first fit heuristic with highly flexible networks. A simulation study is presented to demonstrate that, thanks to the use of Best Gap, EONs can exploit the network flexibility and reduce the blocking ratio. On the other hand, operators must face profound architectural changes to increase the adaptability and flexibility of networks and ease their management. Thanks to the use of network function virtualisation (NFV), the necessary network functions that must be applied to offer a service can be deployed as virtual appliances hosted by commodity servers, which can be located in data centres, network nodes or even end-user premises. The appearance of new computation and networking paradigms, like multi-access edge computing (MEC), may facilitate the adaptation of communication networks to the new demands. Furthermore, the use of MEC technology will enable the possibility of installing those virtual network functions (VNFs) not only at data centres (DCs) and central offices (COs), traditional hosts of VFNs, but also at the edge nodes of the network. Since data processing is performed closer to the enduser, the latency associated to each service connection request can be reduced. MEC nodes will be usually connected between them and with the DCs and COs by optical networks. In such a scenario, deploying a network service requires completing two phases: the VNF-placement, i.e., deciding the number and location of VNFs, and the VNF-chaining, i.e., connecting the VNFs that the traffic associated to a service must transverse in order to establish the connection. In the chaining process, not only the existence of VNFs with available processing capacity, but the availability of network resources must be taken into account to avoid the rejection of the connection request. Taking into consideration that the backhaul of this scenario will be usually based on WRONs or EONs, it is necessary to design the virtual topology (i.e., the set of lightpaths established in the networks) in order to transport the tra c from one node to another. The process of designing the virtual topology includes deciding the number of connections or lightpaths, allocating them a route and spectral resources, and finally grooming the traffic into the created lightpaths. Lastly, a failure in the equipment of a node in an NFV environment can cause the disruption of the SCs traversing the node. This can cause the loss of huge amounts of data and affect thousands of end-users. In consequence, it is key to provide the network with faultmanagement techniques able to guarantee the resilience of the established connections when a node fails. For the mentioned reasons, it is necessary to design orchestration algorithms which solve the VNF-placement, chaining and network resource allocation problems in 5G networks with optical backhaul. Moreover, some versions of those algorithms must also implements protection techniques to guarantee the resilience system in case of failure. This thesis makes contribution in that line. Firstly, a genetic algorithm is proposed to solve the VNF-placement and VNF-chaining problems in a 5G network with optical backhaul based on star topology: GASM (genetic algorithm for effective service mapping). Then, we propose a modification of that algorithm in order to be applied to dynamic scenarios in which the reconfiguration of the planning is allowed. Furthermore, we enhanced the modified algorithm to include a learning step, with the objective of improving the performance of the algorithm. In this thesis, we also propose an algorithm to solve not only the VNF-placement and VNF-chaining problems but also the design of the virtual topology, considering that a WRON is deployed as the backhaul network connecting MEC nodes and CO. Moreover, a version including individual VNF protection against node failure has been also proposed and the effect of using shared/dedicated and end-to-end SC/individual VNF protection schemes are also analysed. Finally, a new algorithm that solves the VNF-placement and chaining problems and the virtual topology design implementing a new chaining technique is also proposed. Its corresponding versions implementing individual VNF protection are also presented. Furthermore, since the method works with any type of WDM mesh topologies, a technoeconomic study is presented to compare the effect of using different network topologies in both the network performance and cost.Departamento de Teoría de la Señal y Comunicaciones e Ingeniería TelemáticaDoctorado en Tecnologías de la Información y las Telecomunicacione

Reconfigurable multi-carrier transmitters and their application in next generation optical networks

With the advent of new series of Internet services and applications, future networks will have to go beyond basic Internet connectivity and encompass diverse services including connected sensors, smart devices, vehicles, and homes. Today’s telecommunication systems are static, with pre-provisioned links requiring an expensive and time-consuming reconfiguration process. Hence, future networks need to be flexible and programmable, allowing for resources to be directed, where the demand exists, thus improving network efficiency. A cost-effective solution is to utilise the legacy fibre infrastructure more efficiently, by reducing the size of the guard bands and allowing closer optical carrier spacing, thereby increasing the overall spectral efficiency. However, such a scheme imposes stringent transmitter requirements such as frequency stability, which would not be met with the incumbent laser-array based transmitters. An attractive alternative would be to employ an optical frequency comb (OFC), which generates multiple phase correlated carriers with precise frequency separation. The reconfigurability of such a multi-carrier transmitter would enable tuning of channel spacing, number of carriers and emission wavelengths, according to the dynamic network demands. This research thesis presents the work carried out, in the physical layer, towards realising reconfigurability of an optical multi-carrier transmitter system. The work focuses on an externally injected gain-switched laser-based OFC (EI-GSL), which is a particular type of multi-carrier source. Apart from the detailed characterisation of GSL OFCs, advances to the state of the art are achieved via comb expansion, investigating new demultiplexing methods and system implementations. Firstly, two novel broadband GS-OFC generation techniques are proposed and experimentally demonstrated. Subsequently, two flexible and compact demultiplexing solutions, based on micro-ring resonators and laser based active demultiplexers are investigated. Finally, the application of a reconfigurable multi-carrier transmitter, employed in access and data centre networks, as well as analog-radio over fibre (A-RoF) distribution systems, is experimentally demonstrated

Next generation control of transport networks

It is widely understood by telecom operators and industry analysts that bandwidth demand is increasing dramatically, year on year, with typical growth figures of 50% for Internet-based traffic [5]. This trend means that the consumers will have both a wide variety of devices attaching to their networks and a range of high bandwidth service requirements. The corresponding impact is the effect on the traffic engineered network (often referred to as the “transport network”) to ensure that the current rate of growth of network traffic is supported and meets predicted future demands. As traffic demands increase and newer services continuously arise, novel network elements are needed to provide more flexibility, scalability, resilience, and adaptability to today’s transport network. The transport network provides transparent traffic engineered communication of user, application, and device traffic between attached clients (software and hardware) and establishing and maintaining point-to-point or point-to-multipoint connections. The research documented in this thesis was based on three initial research questions posed while performing research at British Telecom research labs and investigating control of transport networks of future transport networks: 1. How can we meet Internet bandwidth growth yet minimise network costs? 2. Which enabling network technologies might be leveraged to control network layers and functions cooperatively, instead of separated network layer and technology control? 3. Is it possible to utilise both centralised and distributed control mechanisms for automation and traffic optimisation? This thesis aims to provide the classification, motivation, invention, and evolution of a next generation control framework for transport networks, and special consideration of delivering broadcast video traffic to UK subscribers. The document outlines pertinent telecoms technology and current art, how requirements I gathered, and research I conducted, and by which the transport control framework functional components are identified and selected, and by which method the architecture was implemented and applied to key research projects requiring next generation control capabilities, both at British Telecom and the wider research community. Finally, in the closing chapters, the thesis outlines the next steps for ongoing research and development of the transport network framework and key areas for further study