Low velocity impact response of rc beam with artificial polyethylene aggregate as concrete block infill

In structural design, an ideal situation for saving materials would be to reduce the weight of the structure without having to compromise on its strength and serviceability. A new lightweight composite reinforced concrete section was developed with a novel use of a lightweight concrete block as infill utilizing Artificial Polyethylene Aggregate (APEA and MAPEA). The concrete near the neutral axis acts as a stress transfer medium between the compression and tension zones. Partial replacement of the concrete near the neutral axis could create a reduction in weight and savings in the use of materials. In this experimental work, APEA and MAPEA were utilized as replacement for normal aggregates (NA) at percentages of 0%, 3%, 6%, and 9%, 12%, and 100% in the concrete mix. In this study, the concrete block infill uses the 100% MAPEA as a replacement for coarse aggregate. A total of sixteen beams were prepared measuring 170 mm × 250 mm × 1000 mm, in which four specimens were used as control samples (NRC) and twelve specimens were the reinforced concrete beam incorporated with different size of concrete block infill (RCAI) consisting of 100% MAPEA. All beams were tested with 100 kg steel weight dropped vertically from a height of 0.6 m and 1.54 m, which was equivalent to 3.5 m/s and 5.5 m/s respectively. Based on the experimental results, the impact force, displacement and crack patterns were affected by the impact load. For RCAI specimens, the impact force was larger but smaller displacement value was observed, compared to the NRC specimens. Furthermore, the width of the cracks generated in the RCAI specimens near the mid-span was less than that on the NRC specimen. All experiment results were validated against FEM. The transient impact force histories, displacement and crack patterns obtained from FEM matched reasonably well with the experiment results. The error reported a range of 1% to 15%. The results showed that the proposed use of concrete block infill produced desirable results under the impact loads. The main advantages of the concrete block infill that utilized MAPEA from waste plastic bags due to the weight reduction about 6% in the concrete beams

Improvement of speed response in four-phase DC–DC converter switching using two shunt voltage-source

This study proposes a technique that is able to improve the speed response of a four-phase DC–DC converter switching. The basic concept of the proposed technique is the inclusion of two shunt-connected voltage sources in series to the converter system. Using a higher input voltage to drive the load, a higher current per microsecond output system will be obtained and reverts to its nominal input upon obtaining desired references. Thus, the transient response observed when using this proposed technique is found to be much faster when compared to the conventional converter. Moreover, this technique is easily implemented as it requires only an additional voltage source, power switch, and power diode. The integrated model of the two shunt voltage-source in a four-phase DC–DC converter was simulated in MATLAB/Simulink and validated against the experimental results of a laboratory prototype, 600 W four-phase DC–DC converter. The novelty of this proposed technique is its ability to provide faster operations for critical loads applications, lower output capacitor and lower operating frequency

An approach for real world data modelling with the 3D terrestrial laser scanner for built environment

Capturing and modelling 3D information of the built environment is a big challenge. A number of techniques and technologies are now in use. These include EDM, GPS, and photogrammetric application, remote sensing and traditional building surveying applications. However, use of these technologies cannot be practical and efficient in regard to time, cost and accuracy. Furthermore, a multi disciplinary knowledge base, created from the studies and research about the regeneration aspects is fundamental: historical, architectural, archeologically, environmental, social, economic, etc. In order to have an adequate diagnosis of regeneration, it is necessary to describe buildings and surroundings by means of documentation and plans. However, at this point in time the foregoing is considerably far removed from the real situation, since more often than not it is extremely difficult to obtain full documentation and cartography, of an acceptable quality, since the material, constructive pathologies and systems are often insufficient or deficient (flat that simply reflects levels, isolated photographs,..). Sometimes the information in reality exists, but this fact is not known, or it is not easily accessible, leading to the unnecessary duplication of efforts and resources. In this paper, we discussed 3D laser scanning technology, which can acquire high density point data in an accurate, fast way. Besides, the scanner can digitize all the 3D information concerned with a real world object such as buildings, trees and terrain down to millimetre detail Therefore, it can provide benefits for refurbishment process in regeneration in the Built Environment and it can be the potential solution to overcome the challenges above. The paper introduce an approach for scanning buildings, processing the point cloud raw data, and a modelling approach for CAD extraction and building objects classification by a pattern matching approach in IFC (Industry Foundation Classes) format. The approach presented in this paper from an undertaken research can lead to parametric design and Building Information Modelling (BIM) for existing structures. Two case studies are introduced to demonstrate the use of laser scanner technology in the Built Environment. These case studies are the Jactin House Building in East Manchester and the Peel building in the campus of University Salford. Through these case studies, while use of laser scanners are explained, the integration of it with various technologies and systems are also explored for professionals in Built Environmen

A semantic-based platform for the digital analysis of architectural heritage

This essay focuses on the fields of architectural documentation and digital representation. We present a research paper concerning the development of an information system at the scale of architecture, taking into account the relationships that can be established between the representation of buildings (shape, dimension, state of conservation, hypothetical restitution) and heterogeneous information about various fields (such as the technical, the documentary or still the historical one). The proposed approach aims to organize multiple representations (and associated information) around a semantic description model with the goal of defining a system for the multi-field analysis of buildings

Electronic Imaging & the Visual Arts. EVA 2013 Florence

Important Information Technology topics are presented: multimedia systems, data-bases, protection of data, access to the content. Particular reference is reserved to digital images (2D, 3D) regarding Cultural Institutions (Museums, Libraries, Palace – Monuments, Archaeological Sites). The main parts of the Conference Proceedings regard: Strategic Issues, EC Projects and Related Networks & Initiatives, International Forum on “Culture & Technology”, 2D – 3D Technologies & Applications, Virtual Galleries – Museums and Related Initiatives, Access to the Culture Information. Three Workshops are related to: International Cooperation, Innovation and Enterprise, Creative Industries and Cultural Tourism

Electronic Imaging & the Visual Arts. EVA 2012 Florence

The key aim of this Event is to provide a forum for the user, supplier and scientific research communities to meet and exchange experiences, ideas and plans in the wide area of Culture & Technology. Participants receive up to date news on new EC and international arts computing & telecommunications initiatives as well as on Projects in the visual arts field, in archaeology and history. Working Groups and new Projects are promoted. Scientific and technical demonstrations are presented

Digital Image Access & Retrieval

The 33th Annual Clinic on Library Applications of Data Processing, held at the University of Illinois at Urbana-Champaign in March of 1996, addressed the theme of "Digital Image Access & Retrieval." The papers from this conference cover a wide range of topics concerning digital imaging technology for visual resource collections. Papers covered three general areas: (1) systems, planning, and implementation; (2) automatic and semi-automatic indexing; and (3) preservation with the bulk of the conference focusing on indexing and retrieval.published or submitted for publicatio

Geoinformatics for the conservation and promotion of cultural heritage in support of the UN Sustainable Development Goals

Cultural Heritage (CH) is recognised as being of historical, social, and anthropological value and is considered as an enabler of sustainable development. As a result, it is included in the United Nations' Sustainable Development Goals (SDGs) 11 and 8. SDG 11.4 emphasises the protection and safeguarding of heritage, and SDG 8.9 aims to promote sustainable tourism that creates jobs and promotes local culture and products. This paper briefly reviews the geoinformatics technologies of photogrammetry, remote sensing, and spatial information science and their application to CH. Detailed aspects of CH-related SDGs, comprising protection and safeguarding, as well as the promotion of sustainable tourism are outlined. Contributions of geoinformatics technologies to each of these aspects are then identified and analysed. Case studies in both developing and developed countries, supported by funding directed at the UN SDGs, are presented to illustrate the challenges and opportunities of geoinformatics to enhance CH protection and to promote sustainable tourism. The potential and impact of geoinformatics for the measurement of official SDG indicators, as well as UNESCO's Culture for Development Indicators, are discussed. Based on analysis of the review and the presented case studies, it is concluded that the contribution of geoinformatics to the achievement of CH SDGs is necessary, significant and evident. Moreover, following the UNESCO initiative to introduce CH into the sustainable development agenda and related ICOMOS action plan, the concept of Sustainable Cultural Heritage is defined, reflecting the significance of CH to the United Nations' ambition to "transform our world"