Advancing automation and robotics technology for the space station and for the US economy: Submitted to the United States Congress October 1, 1987

In April 1985, as required by Public Law 98-371, the NASA Advanced Technology Advisory Committee (ATAC) reported to Congress the results of its studies on advanced automation and robotics technology for use on the space station. This material was documented in the initial report (NASA Technical Memorandum 87566). A further requirement of the Law was that ATAC follow NASA's progress in this area and report to Congress semiannually. This report is the fifth in a series of progress updates and covers the period between 16 May 1987 and 30 September 1987. NASA has accepted the basic recommendations of ATAC for its space station efforts. ATAC and NASA agree that the mandate of Congress is that an advanced automation and robotics technology be built to support an evolutionary space station program and serve as a highly visible stimulator affecting the long-term U.S. economy

The Development of a Sensitive Manipulation End Effector

This thesis designed and realized a two-degree of freedom wrist and two finger manipulator that completes the six-degree of freedom Sensitive Manipulation Platform, the arm of which was previously developed. This platform extends the previous research in the field of robotics by covering not only the end effector with deformable tactile sensors, but also the links of the arm. Having tactile sensors on the arm will improve the dynamic model of the system during contact with its environment and will allow research in contact navigation to be explored. This type of research is intended for developing algorithms for exploring dynamic environments. Unlike traditional robots that focus on collision avoidance, this platform is designed to seek out contact and use it to gather important information about its surroundings. This small desktop platform was designed to have similar proportions and properties to a small human arm. These properties include compliant joints and tactile sensitivity along the lengths of the arms. The primary applications for the completed platform will be research in contact navigation and manipulation in dynamic environments. However, there are countless potential applications for a compliant arm with increased tactile feedback, including prosthetics and domestic robotics. This thesis covers the details behind the design, analysis, and evaluation of the two degrees of the Wrist and two two-link fingers, with particular attention being given to the integration of series elastics actuators, the decoupling of the fingers from the wrist, and the incorporation of tactile sensors in both the forearm motor module and fingers

Virtual Prototyping and Validation for Autonomous Assistive Mobility

Physical disability in humans is something that no one has control over. It is catastrophic for people to experience it, and sometimes hinders them from enjoying the essence of life. Though disability is something people have no control over, they do have control on how they can go forward and make life beautiful and meaningful. Wheelchairs have helped people with disabilities in mobility, allowing them to move around with the help of others or sometimes on their own. This research will focus on development of an autonomous assistive mobility robot to help the disabled using virtual prototyping tools for development and validation. The developed virtual model will also be developed in real world and validated to navigate autonomously. The virtual and real-world autonomous model developed will take a systems engineering approach. The key features of this system are mapping, localisation, and navigating towards a goal autonomously. The virtual model is validated in different virtual environments for its functionality. The real-world model is developed similar to its virtual counterpart and is tested and validated for its functionality. The local path planner implemented is analyzed quantitatively for both the real-world and virtual models. The differences in design and development are analyzed and identified. To conclude, the research has lead to the development of a virtual and real-world model of an autonomous wheelchair that has been tested and validated in both the environments

A Robust Platform for Mobile Robotics Teaching and Developing Using Arduino’s Integrated Development Environment (IDE) for Programming the Arduino MEGA 2560

In light of the rapid pace at which development happens with modern technology, mobile robots play an important role in our daily lives. This is due to their great importance in facilitating the affairs of life in various economic, commercial, industrial, scientific, and many other fields. In this research and project, we have restructured the microcontroller and system for one of the mobile robots (CEENBOT) that was designed by the University of Nebraska and replaced it with an Arduino Mega 2560. The purpose of using the Arduino Mega 2560 robot is to provide alternative programming for the CEENBOT platform to support an Arduino programming option. It is an open-source program which makes it easily accessible for developers and programmers. The Arduino Mega 2560 is an open-source electronics platform built on easy-to-use hardware and software. The Arduino Mega 2560 robot provides one of the most accessible ways to install different sensors and can be used in different aspects or applications that can be useful for mobile robotics teaching and development. Following the completion of this research and project, the electrical and computer engineering department at the University of Nebraska - Lincoln will be able to enhance its existing robotics course offerings using this robot. New laboratories have been created for teaching and development in this research. The laboratories include Simulink Getting Started, Simulink with Arduino Mega 2560, Integrated development environment IDE Getting Started with Arduino Mega 2560, Getting to Know the Robot Hardware, Getting Started on Moving the Robot, Obstacle Avoidance, Wireless Communication, and Create Your Own Lab Adventure. Advisors: Alisa Gilmore and Bing Che

Robotic sampling system for an unmanned Mars mission

A major robotics opportunity for NASA will be the Mars Rover/Sample Return Mission which could be launched as early as the 1990s. The exploratory portion of this mission will include two autonomous subsystems: the rover vehicle and a sample handling system. The sample handling system is the key to the process of collecting Martian soils. This system could include a core drill, a general-purpose manipulator, tools, containers, a return canister, certification hardware and a labeling system. Integrated into a functional package, the sample handling system is analogous to a complex robotic workcell. Discussed here are the different components of the system, their interfaces, forseeable problem areas and many options based on the scientific goals of the mission. The various interfaces in the sample handling process (component to component and handling system to rover) will be a major engineering effort. Two critical evaluation criteria that will be imposed on the system are flexibility and reliability. It needs to be flexible enough to adapt to different scenarios and environments and acquire the most desirable specimens for return to Earth. Scientists may decide to change the distribution and ratio of core samples to rock samples in the canister. The long distance and duration of this planetary mission places a reliability burden on the hardware. The communication time delay between Earth and Mars minimizes operator interaction (teleoperation, supervisory modes) with the sample handler. An intelligent system will be required to plan the actions, make sample choices, interpret sensor inputs, and query unknown surroundings. A combination of autonomous functions and supervised movements will be integrated into the sample handling system

Development of an automated robot vision component handling system

Thesis (M. Tech. (Engineering: Electrical)) -- Central University of technology, Free State, 2013In the industry, automation is used to optimize production, improve product quality and increase profitability. By properly implementing automation systems, the risk of injury to workers can be minimized. Robots are used in many low-level tasks to perform repetitive, undesirable or dangerous work. Robots can perform a task with higher precision and accuracy to lower errors and waste of material. Machine Vision makes use of cameras, lighting and software to do visual inspections that a human would normally do. Machine Vision is useful in application where repeatability, high speed and accuracy are important. This study concentrates on the development of a dedicated robot vision system to automatically place components exiting from a conveyor system onto Automatic Guided Vehicles (AGV). A personal computer (PC) controls the automated system. Software modules were developed to do image processing for the Machine Vision system as well as software to control a Cartesian robot. These modules were integrated to work in a real-time system. The vision system is used to determine the parts‟ position and orientation. The orientation data are used to rotate a gripper and the position data are used by the Cartesian robot to position the gripper over the part. Hardware for the control of the gripper, pneumatics and safety systems were developed. The automated system‟s hardware was integrated by the use of the different communication protocols, namely DeviceNet (Cartesian robot), RS-232 (gripper) and Firewire (camera)

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 333)

This bibliography lists 122 reports, articles and other documents introduced into the NASA Scientific and Technical Information System during January, 1990. Subject coverage includes: aerospace medicine and psychology, life support systems and controlled environments, safety equipment, exobiology and extraterrestrial life, and flight crew behavior and performance

Space Station RT and E Utilization Study

Descriptive information on a set of 241 mission concepts was reviewed to establish preliminary Space Station outfitting needs for technology development missions. The missions studied covered the full range of in-space technology development activities envisioned for early Space Station operations and included both pressurized volume and attached payload requirements. Equipment needs were compared with outfitting plans for the life sciences and microgravity user communities, and a number of potential outfitting additions were identified. Outfitting implementation was addressed by selecting a strawman mission complement for each of seven technical themes, by organizing the missions into flight scenarios, and by assessing the associated outfitting buildup for planning impacts