Energy-efficient and high-performance lock speculation hardware for embedded multicore systems

Embedded systems are becoming increasingly common in everyday life and like their general-purpose counterparts, they have shifted towards shared memory multicore architectures. However, they are much more resource constrained, and as they often run on batteries, energy efficiency becomes critically important. In such systems, achieving high concurrency is a key demand for delivering satisfactory performance at low energy cost. In order to achieve this high concurrency, consistency across the shared memory hierarchy must be accomplished in a cost-effective manner in terms of performance, energy, and implementation complexity. In this article, we propose Embedded-Spec, a hardware solution for supporting transparent lock speculation, without the requirement for special supporting instructions. Using this approach, we evaluate the energy consumption and performance of a suite of benchmarks, exploring a range of contention management and retry policies. We conclude that for resource-constrained platforms, lock speculation can provide real benefits in terms of improved concurrency and energy efficiency, as long as the underlying hardware support is carefully configured.This work is supported in part by NSF under Grants CCF-0903384, CCF-0903295, CNS-1319495, and CNS-1319095 as well the Semiconductor Research Corporation under grant number 1983.001. (CCF-0903384 - NSF; CCF-0903295 - NSF; CNS-1319495 - NSF; CNS-1319095 - NSF; 1983.001 - Semiconductor Research Corporation

A Survey on Cache Management Mechanisms for Real-Time Embedded Systems

© ACM, 2015. This is the author's version of the work. It is posted here by permission of ACM for your personal use. Not for redistribution. The definitive version was published in ACM Computing Surveys, {48, 2, (November 2015)} http://doi.acm.org/10.1145/2830555Multicore processors are being extensively used by real-time systems, mainly because of their demand for increased computing power. However, multicore processors have shared resources that affect the predictability of real-time systems, which is the key to correctly estimate the worst-case execution time of tasks. One of the main factors for unpredictability in a multicore processor is the cache memory hierarchy. Recently, many research works have proposed different techniques to deal with caches in multicore processors in the context of real-time systems. Nevertheless, a review and categorization of these techniques is still an open topic and would be very useful for the real-time community. In this article, we present a survey of cache management techniques for real-time embedded systems, from the first studies of the field in 1990 up to the latest research published in 2014. We categorize the main research works and provide a detailed comparison in terms of similarities and differences. We also identify key challenges and discuss future research directions.King Saud University NSER

The potential of programmable logic in the middle: cache bleaching

Consolidating hard real-time systems onto modern multi-core Systems-on-Chip (SoC) is an open challenge. The extensive sharing of hardware resources at the memory hierarchy raises important unpredictability concerns. The problem is exacerbated as more computationally demanding workload is expected to be handled with real-time guarantees in next-generation Cyber-Physical Systems (CPS). A large body of works has approached the problem by proposing novel hardware re-designs, and by proposing software-only solutions to mitigate performance interference. Strong from the observation that unpredictability arises from a lack of fine-grained control over the behavior of shared hardware components, we outline a promising new resource management approach. We demonstrate that it is possible to introduce Programmable Logic In-the-Middle (PLIM) between a traditional multi-core processor and main memory. This provides the unique capability of manipulating individual memory transactions. We propose a proof-of-concept system implementation of PLIM modules on a commercial multi-core SoC. The PLIM approach is then leveraged to solve long-standing issues with cache coloring. Thanks to PLIM, colored sparse addresses can be re-compacted in main memory. This is the base principle behind the technique we call Cache Bleaching. We evaluate our design on real applications and propose hypervisor-level adaptations to showcase the potential of the PLIM approach.Accepted manuscrip

Virtual Machine Support for Many-Core Architectures: Decoupling Abstract from Concrete Concurrency Models

The upcoming many-core architectures require software developers to exploit concurrency to utilize available computational power. Today's high-level language virtual machines (VMs), which are a cornerstone of software development, do not provide sufficient abstraction for concurrency concepts. We analyze concrete and abstract concurrency models and identify the challenges they impose for VMs. To provide sufficient concurrency support in VMs, we propose to integrate concurrency operations into VM instruction sets. Since there will always be VMs optimized for special purposes, our goal is to develop a methodology to design instruction sets with concurrency support. Therefore, we also propose a list of trade-offs that have to be investigated to advise the design of such instruction sets. As a first experiment, we implemented one instruction set extension for shared memory and one for non-shared memory concurrency. From our experimental results, we derived a list of requirements for a full-grown experimental environment for further research

WCET-aware prefetching of unlocked instruction caches: a technique for reconciling real-time guarantees and energy efficiency

Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia de Automação e Sistemas, Florianópolis, 2015.A computação embarcada requer crescente vazão sob baixa potência. Ela requer um aumento de eficiência energética quando se executam programas de crescente complexidade. Muitos sistemas embarcados são também sistemas de tempo real, cuja correção temporal precisa ser garantida através de análise de escalonabilidade, a qual costuma assumir que o WCET de uma tarefa é conhecido em tempo de projeto. Como resultado da crescente complexidade do software, uma quantidade significativa de energia é gasta ao se prover instruções através da hierarquia de memória. Como a cache de instruções consome cerca de 40% da energia gasta em um processador embarcado e afeta a energia consumida em memória principal, ela se torna um relevante alvo para otimização. Entretanto, como ela afeta substancialmente o WCET, o comportamento da cache precisa ser restrito via  cache locking ou previsto via análise de WCET. Para obter eficiência energética sob restrições de tempo real, é preciso estender a consciência que o compilador tem da plataforma de hardware. Entretanto, compiladores para tempo real ignoram a energia, embora determinem rapidamente limites superiores para o WCET, enquanto compiladores para sistemas embarcados estimem com precisão a energia, mas gastem muito tempo em  profiling . Por isso, esta tese propõe um método unificado para estimar a energia gasta em memória, o qual é baseado em Interpretação Abstrata, exatamente o mesmo substrato matemático usado para a análise de WCET em caches. As estimativas mostram derivadas que são tão precisas quanto as obtidas via  profiling , mas são computadas 1000 vezes mais rápido, sendo apropriadas para induzir otimização de código através de melhoria iterativa. Como  cache locking troca eficiência energética por previsibilidade, esta tese propõe uma nova otimização de código, baseada em pré-carga por software, a qual reduz a taxa de faltas de caches de instruções e, provadamente, não aumenta o WCET. A otimização proposta é comparada com o estado-da-arte em  cache locking parcial para 37 programas do  Malardalen WCET benchmark para 36 configurações de cache e duas tecnologias distintas (2664 casos de uso). Em média, para obter uma melhoria de 68% no WCET,  cache locking parcial requer 8% mais energia. Por outro lado, a pré-carga por software diminui o consumo de energia em 11% enquanto melhora em 15% o WCET, reconciliando assim eficiência energética e garantias de tempo real.Abstract : Embedded computing requires increasing throughput at low power budgets. It asks for growing energy efficiency when executing programs of rising complexity. Many embedded systems are also real-time systems, whose temporal correctness is asserted through schedulability analysis, which often assumes that the WCET of each task is known at design-time. As a result of the growing software complexity, a significant amount of energy is spent in supplying instructions through the memory hierarchy. Since an instruction cache consumes around 40% of an embedded processor s energy and affects the energy spent in main memory, it becomes a relevant optimization target. However, since it largely impacts the WCET, cache behavior must be either constrained via cache locking or predicted by WCET analysis. To achieve energy efficiency under real-time constraints, a compiler must have extended awareness of the hardware platform. However, real-time compilers ignore energy, although they quickly determine bounds for WCET, whereas embedded compilers accurately estimate energy but require time-consuming profiling. That is why this thesis proposes a unifying method to estimate memory energy consumption that is based on Abstract Interpretation, the very same mathematical framework employed for the WCET analysis of caches. The estimates exhibit derivatives that are as accurate as those obtained by profiling, but are computed 1000 times faster, being suitable for driving code optimization through iterative improvement. Since cache locking gives up energy efficiency for predictability, this thesis proposes a novel code optimization, based on software prefetching, which reduces miss rate of unlocked instruction caches and, provenly, does not increase the WCET. The proposed optimization is compared with a state-of-the-art partial cache locking technique for the 37 programs of the Malardalen WCET benchmarks under 36 cache configurations and two distinct target technologies (2664 use cases). On average, to achieve an improvement of 68% in the WCET, partial cache locking required 8% more energy. On the other hand, software prefetching decreased the energy consumption by 11% while leading to an improvement of 15% in the WCET, thereby reconciling energy efficiency and real-time guarantees

A survey of emerging architectural techniques for improving cache energy consumption

The search goes on for another ground breaking phenomenon to reduce the ever-increasing disparity between the CPU performance and storage. There are encouraging breakthroughs in enhancing CPU performance through fabrication technologies and changes in chip designs but not as much luck has been struck with regards to the computer storage resulting in material negative system performance. A lot of research effort has been put on finding techniques that can improve the energy efficiency of cache architectures. This work is a survey of energy saving techniques which are grouped on whether they save the dynamic energy, leakage energy or both. Needless to mention, the aim of this work is to compile a quick reference guide of energy saving techniques from 2013 to 2016 for engineers, researchers and students

A compiler level intermediate representation based binary analysis system and its applications

Analyzing and optimizing programs from their executables has received a lot of attention recently in the research community. There has been a tremendous amount of activity in executable-level research targeting varied applications such as security vulnerability analysis, untrusted code analysis, malware analysis, program testing, and binary optimizations. The vision of this dissertation is to advance the field of static analysis of executables and bridge the gap between source-level analysis and executable analysis. The main thesis of this work is scalable static binary rewriting and analysis using compiler-level intermediate representation without relying on the presence of metadata information such as debug or symbolic information. In spite of a significant overlap in the overall goals of several source-code methods and executables-level techniques, several sophisticated transformations that are well-understood and implemented in source-level infrastructures have yet to become available in executable frameworks. It is a well known fact that a standalone executable without any meta data is less amenable to analysis than the source code. Nonetheless, we believe that one of the prime reasons behind the limitations of existing executable frameworks is that current executable frameworks define their own intermediate representations (IR) which are significantly more constrained than an IR used in a compiler. Intermediate representations used in existing binary frameworks lack high level features like abstract stack, variables, and symbols and are even machine dependent in some cases. This severely limits the application of well-understood compiler transformations to executables and necessitates new research to make them applicable. In the first part of this dissertation, we present techniques to convert the binaries to the same high-level intermediate representation that compilers use. We propose methods to segment the flat address space in an executable containing undifferentiated blocks of memory. We demonstrate the inadequacy of existing variable identification methods for their promotion to symbols and present our methods for symbol promotion. We also present methods to convert the physically addressed stack in an executable to an abstract stack. The proposed methods are practical since they do not employ symbolic, relocation, or debug information which are usually absent in deployed executables. We have integrated our techniques with a prototype x86 binary framework called \emph{SecondWrite} that uses LLVM as the IR. The robustness of the framework is demonstrated by handling executables totaling more than a million lines of source-code, including several real world programs. In the next part of this work, we demonstrate that several well-known source-level analysis frameworks such as symbolic analysis have limited effectiveness in the executable domain since executables typically lack higher-level semantics such as program variables. The IR should have a precise memory abstraction for an analysis to effectively reason about memory operations. Our first work of recovering a compiler-level representation addresses this limitation by recovering several higher-level semantics information from executables. In the next part of this work, we propose methods to handle the scenarios when such semantics cannot be recovered. First, we propose a hybrid static-dynamic mechanism for recovering a precise and correct memory model in executables in presence of executable-specific artifacts such as indirect control transfers. Next, the enhanced memory model is employed to define a novel symbolic analysis framework for executables that can perform the same types of program analysis as source-level tools. Frameworks hitherto fail to simultaneously maintain the properties of correct representation and precise memory model and ignore memory-allocated variables while defining symbolic analysis mechanisms. We exemplify that our framework is robust, efficient and it significantly improves the performance of various traditional analyses like global value numbering, alias analysis and dependence analysis for executables. Finally, the underlying representation and analysis framework is employed for two separate applications. First, the framework is extended to define a novel static analysis framework, \emph{DemandFlow}, for identifying information flow security violations in program executables. Unlike existing static vulnerability detection methods for executables, DemandFlow analyzes memory locations in addition to symbols, thus improving the precision of the analysis. DemandFlow proposes a novel demand-driven mechanism to identify and precisely analyze only those program locations and memory accesses which are relevant to a vulnerability, thus enhancing scalability. DemandFlow uncovers six previously undiscovered format string and directory traversal vulnerabilities in popular ftp and internet relay chat clients. Next, the framework is extended to implement a platform-specific optimization for embedded processors. Several embedded systems provide the facility of locking one or more lines in the cache. We devise the first method in literature that employs instruction cache locking as a mechanism for improving the average-case run-time of general embedded applications. We demonstrate that the optimal solution for instruction cache locking can be obtained in polynomial time. Since our scheme is implemented inside a binary framework, it successfully addresses the portability concern by enabling the implementation of cache locking at the time of deployment when all the details of the memory hierarchy are available

STUDIES OF PERFORMANCE AND PREDICTABILITY OF CACHE-LOCKING

Today’s real-time systems need to be faster and more powerful than ever before. Caches are an architectural feature that helps solve this problem. Caches however are unpredictable and do not improve the worst case execution time. This work studies the effects of cache-locking on performance and time predictability. Two locking methods were evaluated: a dynamic locking method and a static locking method. The performance of single and multi-core processors and multiple levels of caches were studied. The time predictability of the single core system was studied and the cost of the time predictability was determined for each locking method. Cache-locking in the Level 2 cache had the best performance and the static-locking method had the highest predictability