Distributed data cache designs for clustered VLIW processors

Wire delays are a major concern for current and forthcoming processors. One approach to deal with this problem is to divide the processor into semi-independent units referred to as clusters. A cluster usually consists of a local register file and a subset of the functional units, while the L1 data cache typically remains centralized in What we call partially distributed architectures. However, as technology evolves, the relative latency of such a centralized cache will increase, leading to an important impact on performance. In this paper, we propose partitioning the L1 data cache among clusters for clustered VLIW processors. We refer to this kind of design as fully distributed processors. In particular; we propose and evaluate three different configurations: a snoop-based cache coherence scheme, a word-interleaved cache, and flexible LO-buffers managed by the compiler. For each alternative, instruction scheduling techniques targeted to cyclic code are developed. Results for the Mediabench suite'show that the performance of such fully distributed architectures is always better than the performance of a partially distributed one with the same amount of resources. In addition, the key aspects of each fully distributed configuration are explored.Peer ReviewedPostprint (published version

Instruction replication for clustered microarchitectures

This work presents a new compilation technique that uses instruction replication in order to reduce the number of communications executed on a clustered microarchitecture. For such architectures, the need to communicate values between clusters can result in a significant performance loss. Inter-cluster communications can be reduced by selectively replicating an appropriate set of instructions. However, instruction replication must be done carefully since it may also degrade performance due to the increased contention it can place on processor resources. The proposed scheme is built on top of a previously proposed state-of-the-art modulo scheduling algorithm that effectively reduces communications. Results show that the number of communications can decrease using replication, which results in significant speed-ups. IPC is increased by 25% on average for a 4-cluster microarchitecture and by as mush as 70% for selected programs.Peer ReviewedPostprint (published version

Flexible compiler-managed L0 buffers for clustered VLIW processors

Wire delays are a major concern for current and forthcoming processors. One approach to attack this problem is to divide the processor into semi-independent units referred to as clusters. A cluster usually consists of a local register file and a subset of the functional units, while the data cache remains centralized. However, as technology evolves, the latency of such a centralized cache increase leading to an important performance impact. In this paper, we propose to include flexible low-latency buffers in each cluster in order to reduce the performance impact of higher cache latencies. The reduced number of entries in each buffer permits the design of flexible ways to map data from L1 to these buffers. The proposed L0 buffers are managed by the compiler, which is responsible to decide which memory instructions make us of them. Effective instruction scheduling techniques are proposed to generate code that exploits these buffers. Results for the Mediabench benchmark suite show that the performance of a clustered VLIW processor with a unified L1 data cache is improved by 16% when such buffers are used. In addition, the proposed architecture also shows significant advantages over both MultiVLIW processors and clustered processors with a word-interleaved cache, two state-of-the-art designs with a distributed L1 data cache.Peer ReviewedPostprint (published version

Variable-based multi-module data caches for clustered VLIW processors

Memory structures consume an important fraction of the total processor energy. One solution to reduce the energy consumed by cache memories consists of reducing their supply voltage and/or increase their threshold voltage at an expense in access time. We propose to divide the L1 data cache into two cache modules for a clustered VLIW processor consisting of two clusters. Such division is done on a variable basis so that the address of a datum determines its location. Each cache module is assigned to a cluster and can be set up as a fast power-hungry module or as a slow power-aware module. We also present compiler techniques in order to distribute variables between the two cache modules and generate code accordingly. We have explored several cache configurations using the Mediabench suite and we have observed that the best distributed cache organization outperforms traditional cache organizations by 19%-31% in energy-delay and by 11%-29% in energy-delay. In addition, we also explore a reconfigurable distributed cache, where the cache can be reconfigured on a context switch. This reconfigurable scheme further outperforms the best previous distributed organization by 3%-4%.Peer ReviewedPostprint (published version

Survey on Combinatorial Register Allocation and Instruction Scheduling

Register allocation (mapping variables to processor registers or memory) and instruction scheduling (reordering instructions to increase instruction-level parallelism) are essential tasks for generating efficient assembly code in a compiler. In the last three decades, combinatorial optimization has emerged as an alternative to traditional, heuristic algorithms for these two tasks. Combinatorial optimization approaches can deliver optimal solutions according to a model, can precisely capture trade-offs between conflicting decisions, and are more flexible at the expense of increased compilation time. This paper provides an exhaustive literature review and a classification of combinatorial optimization approaches to register allocation and instruction scheduling, with a focus on the techniques that are most applied in this context: integer programming, constraint programming, partitioned Boolean quadratic programming, and enumeration. Researchers in compilers and combinatorial optimization can benefit from identifying developments, trends, and challenges in the area; compiler practitioners may discern opportunities and grasp the potential benefit of applying combinatorial optimization

Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Improving multithreading performance for clustered VLIW architectures.

Very Long Instruction Word (VLIW) processors are very popular in embedded and mobile computing domain. Use of VLIW processors range from Digital Signal Processors (DSPs) found in a plethora of communication and multimedia devices to Graphics Processing Units (GPUs) used in gaming and high performance computing devices. The advantage of VLIWs is their low complexity and low power design which enable high performance at a low cost. Scalability of VLIWs is limited by the scalability of register file ports. It is not viable to have a VLIW processor with a single large register file because of area and power consumption implications of the register file. Clustered VLIW solve the register file scalability issue by partitioning the register file into multiple clusters and a set of functional units that are attached to register file of that cluster. Using a clustered approach, higher issue width can be achieved while keeping the cost of register file within reasonable limits. Several commercial VLIW processors have been designed using the clustered VLIW model. VLIW processors can be used to run a larger set of applications. Many of these applications have a good Lnstruction Level Parallelism (ILP) which can be efficiently utilized. However, several applications, specially the ones that are control code dominated do not exibit good ILP and the processor is underutilized. Cache misses is another major source of resource underutiliztion. Multithreading is a popular technique to improve processor utilization. Interleaved MultiThreading (IMT) hides cache miss latencies by scheduling a different thread each cycle but cannot hide unused instructions slots. Simultaneous MultiThread (SMT) can also remove ILP under-utilization by issuing multiple threads to fill the empty instruction slots. However, SMT has a higher implementation cost than IMT. The thesis presents Cluster-level Simultaneous MultiThreading (CSMT) that supports a limited form of SMT where VLIW instructions from different threads are merged at a cluster-level granularity. This lowers the hardware implementation cost to a level comparable to the cheap IMT technique. The more complex SMT combines VLIW instructions at the individual operation-level granularity which is quite expensive especially in for a mobile solution. We refer to SMT at operation-level as OpSMT to reduce ambiguity. While previous studies restricted OpSMT on a VLIW to 2 threads, CSMT has a better scalability and upto 8 threads can be supported at a reasonable cost. The thesis proposes several other techniques to further improve CSMT performance. In particular, Cluster renaming remaps the clusters used by instructions of different threads to reduce resource conflicts. Cluster renaming is quite effective in reducing the issue-slots under-utilization and significantly improves CSMT performance.The thesis also proposes: a hybrid between IMT and CSMT which increases the number of supported threads, heterogeneous instruction merging where some instructions are combined using SMT and CSMT rest, and finally, split-issue, a technique that allows to launch partially an instruction making it easier to be combined with others

Local scheduling techniques for memory coherence in a clustered VLIW processor with a distributed data cache

Clustering is a common technique to deal with wire delays. Fully-distributed architectures, where the register file, the functional units and the cache memory are partitioned, are particularly effective to deal with these constraints and besides they are very scalable. However the distribution of the data cache introduces a new problem: memory instructions may reach the cache in an order different to the sequential program order, thus possibly violating its contents. In this paper two local scheduling mechanisms that guarantee the serialization of aliased memory instructions are proposed and evaluated: the construction of memory dependent chains (MDC solution), and two transformations (store replication and load-store synchronization) applied to the original data dependence graph (DDGT solution). These solutions do not require any extra hardware. The proposed scheduling techniques are evaluated for a word-interleaved cache clustered VLIW processor (although these techniques can also be used for any other distributed cache configuration). Results for the Mediabench benchmark suite demonstrate the effectiveness of such techniques. In particular, the DDGT solution increases the proportion of local accesses by 16% compared to MDC, and stall time is reduced by 32% since load instructions can be freely scheduled in any cluster However the MDC solution reduces compute time and it often outperforms the former. Finally the impact of both techniques on an architecture with attraction buffers is studied and evaluated.Peer ReviewedPostprint (published version