A Low-Area, Energy-Efficient 64-Bit Reconfigurable Carry Select Modified Tree-Based Adder for Media Signal Processing

Multimedia systems play an essential part in our daily lives and have drastically improved the quality of life over time. Multimedia devices like cellphones, radios, televisions, and computers require low-area and low-power reconfigurable adders to process greedy computation algorithms for the real-time audio/video signal and image processing such as discrete cosine transform, inverse discrete cosine transform, and fast Fourier transform, etc. In this thesis, a novel 64-bit reconfigurable adder is proposed and implemented to reduce the area and power consumption. This adder can be run-time reconfigured to different reconfigurable word lengths, i.e., one 64- bit, two 32-bits, four 16-bits or eight 8-bits addition, depending on the partition signal command. A Carry Select Modified Tree (CSMT) based adder is used in the reconfigurable adder to reduce the area by 22 % and the power consumption by 47 % when compared to the conventional design. The proposed adder, implemented in 180 nm CMOS technology at 1.8-volt supply, has a worst-case Delay of 20.67 nanoseconds with an overall area of 36,417 μm² and power consumption of 447.93 μW

Efficient reconfigurable architectures for 3D medical image compression

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Recently, the more widespread use of three-dimensional (3-D) imaging modalities, such as magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography (PET), and ultrasound (US) have generated a massive amount of volumetric data. These have provided an impetus to the development of other applications, in particular telemedicine and teleradiology. In these fields, medical image compression is important since both efficient storage and transmission of data through high-bandwidth digital communication lines are of crucial importance. Despite their advantages, most 3-D medical imaging algorithms are computationally intensive with matrix transformation as the most fundamental operation involved in the transform-based methods. Therefore, there is a real need for high-performance systems, whilst keeping architectures exible to allow for quick upgradeability with real-time applications. Moreover, in order to obtain efficient solutions for large medical volumes data, an efficient implementation of these operations is of significant importance. Reconfigurable hardware, in the form of field programmable gate arrays (FPGAs) has been proposed as viable system building block in the construction of high-performance systems at an economical price. Consequently, FPGAs seem an ideal candidate to harness and exploit their inherent advantages such as massive parallelism capabilities, multimillion gate counts, and special low-power packages. The key achievements of the work presented in this thesis are summarised as follows. Two architectures for 3-D Haar wavelet transform (HWT) have been proposed based on transpose-based computation and partial reconfiguration suitable for 3-D medical imaging applications. These applications require continuous hardware servicing, and as a result dynamic partial reconfiguration (DPR) has been introduced. Comparative study for both non-partial and partial reconfiguration implementation has shown that DPR offers many advantages and leads to a compelling solution for implementing computationally intensive applications such as 3-D medical image compression. Using DPR, several large systems are mapped to small hardware resources, and the area, power consumption as well as maximum frequency are optimised and improved. Moreover, an FPGA-based architecture of the finite Radon transform (FRAT)with three design strategies has been proposed: direct implementation of pseudo-code with a sequential or pipelined description, and block random access memory (BRAM)- based method. An analysis with various medical imaging modalities has been carried out. Results obtained for image de-noising implementation using FRAT exhibits promising results in reducing Gaussian white noise in medical images. In terms of hardware implementation, promising trade-offs on maximum frequency, throughput and area are also achieved. Furthermore, a novel hardware implementation of 3-D medical image compression system with context-based adaptive variable length coding (CAVLC) has been proposed. An evaluation of the 3-D integer transform (IT) and the discrete wavelet transform (DWT) with lifting scheme (LS) for transform blocks reveal that 3-D IT demonstrates better computational complexity than the 3-D DWT, whilst the 3-D DWT with LS exhibits a lossless compression that is significantly useful for medical image compression. Additionally, an architecture of CAVLC that is capable of compressing high-definition (HD) images in real-time without any buffer between the quantiser and the entropy coder is proposed. Through a judicious parallelisation, promising results have been obtained with limited resources. In summary, this research is tackling the issues of massive 3-D medical volumes data that requires compression as well as hardware implementation to accelerate the slowest operations in the system. Results obtained also reveal a significant achievement in terms of the architecture efficiency and applications performance.Ministry of Higher Education Malaysia (MOHE), Universiti Tun Hussein Onn Malaysia (UTHM) and the British Counci

Design Techniques for Energy-Quality Scalable Digital Systems

Energy efficiency is one of the key design goals in modern computing. Increasingly complex tasks are being executed in mobile devices and Internet of Things end-nodes, which are expected to operate for long time intervals, in the orders of months or years, with the limited energy budgets provided by small form-factor batteries. Fortunately, many of such tasks are error resilient, meaning that they can toler- ate some relaxation in the accuracy, precision or reliability of internal operations, without a significant impact on the overall output quality. The error resilience of an application may derive from a number of factors. The processing of analog sensor inputs measuring quantities from the physical world may not always require maximum precision, as the amount of information that can be extracted is limited by the presence of external noise. Outputs destined for human consumption may also contain small or occasional errors, thanks to the limited capabilities of our vision and hearing systems. Finally, some computational patterns commonly found in domains such as statistics, machine learning and operational research, naturally tend to reduce or eliminate errors. Energy-Quality (EQ) scalable digital systems systematically trade off the quality of computations with energy efficiency, by relaxing the precision, the accuracy, or the reliability of internal software and hardware components in exchange for energy reductions. This design paradigm is believed to offer one of the most promising solutions to the impelling need for low-energy computing. Despite these high expectations, the current state-of-the-art in EQ scalable design suffers from important shortcomings. First, the great majority of techniques proposed in literature focus only on processing hardware and software components. Nonetheless, for many real devices, processing contributes only to a small portion of the total energy consumption, which is dominated by other components (e.g. I/O, memory or data transfers). Second, in order to fulfill its promises and become diffused in commercial devices, EQ scalable design needs to achieve industrial level maturity. This involves moving from purely academic research based on high-level models and theoretical assumptions to engineered flows compatible with existing industry standards. Third, the time-varying nature of error tolerance, both among different applications and within a single task, should become more central in the proposed design methods. This involves designing “dynamic” systems in which the precision or reliability of operations (and consequently their energy consumption) can be dynamically tuned at runtime, rather than “static” solutions, in which the output quality is fixed at design-time. This thesis introduces several new EQ scalable design techniques for digital systems that take the previous observations into account. Besides processing, the proposed methods apply the principles of EQ scalable design also to interconnects and peripherals, which are often relevant contributors to the total energy in sensor nodes and mobile systems respectively. Regardless of the target component, the presented techniques pay special attention to the accurate evaluation of benefits and overheads deriving from EQ scalability, using industrial-level models, and on the integration with existing standard tools and protocols. Moreover, all the works presented in this thesis allow the dynamic reconfiguration of output quality and energy consumption. More specifically, the contribution of this thesis is divided in three parts. In a first body of work, the design of EQ scalable modules for processing hardware data paths is considered. Three design flows are presented, targeting different technologies and exploiting different ways to achieve EQ scalability, i.e. timing-induced errors and precision reduction. These works are inspired by previous approaches from the literature, namely Reduced-Precision Redundancy and Dynamic Accuracy Scaling, which are re-thought to make them compatible with standard Electronic Design Automation (EDA) tools and flows, providing solutions to overcome their main limitations. The second part of the thesis investigates the application of EQ scalable design to serial interconnects, which are the de facto standard for data exchanges between processing hardware and sensors. In this context, two novel bus encodings are proposed, called Approximate Differential Encoding and Serial-T0, that exploit the statistical characteristics of data produced by sensors to reduce the energy consumption on the bus at the cost of controlled data approximations. The two techniques achieve different results for data of different origins, but share the common features of allowing runtime reconfiguration of the allowed error and being compatible with standard serial bus protocols. Finally, the last part of the manuscript is devoted to the application of EQ scalable design principles to displays, which are often among the most energy- hungry components in mobile systems. The two proposals in this context leverage the emissive nature of Organic Light-Emitting Diode (OLED) displays to save energy by altering the displayed image, thus inducing an output quality reduction that depends on the amount of such alteration. The first technique implements an image-adaptive form of brightness scaling, whose outputs are optimized in terms of balance between power consumption and similarity with the input. The second approach achieves concurrent power reduction and image enhancement, by means of an adaptive polynomial transformation. Both solutions focus on minimizing the overheads associated with a real-time implementation of the transformations in software or hardware, so that these do not offset the savings in the display. For each of these three topics, results show that the aforementioned goal of building EQ scalable systems compatible with existing best practices and mature for being integrated in commercial devices can be effectively achieved. Moreover, they also show that very simple and similar principles can be applied to design EQ scalable versions of different system components (processing, peripherals and I/O), and to equip these components with knobs for the runtime reconfiguration of the energy versus quality tradeoff

Towards adaptive balanced computing (ABC) using reconfigurable functional caches (RFCs)

The general-purpose computing processor performs a wide range of functions. Although the performance of general-purpose processors has been steadily increasing, certain software technologies like multimedia and digital signal processing applications demand ever more computing power. Reconfigurable computing has emerged to combine the versatility of general-purpose processors with the customization ability of ASICs. The basic premise of reconfigurability is to provide better performance and higher computing density than fixed configuration processors. Most of the research in reconfigurable computing is dedicated to on-chip functional logic. If computing resources are adaptable to the computing requirement, the maximum performance can be achieved. To overcome the gap between processor and memory technology, the size of on-chip cache memory has been consistently increasing. The larger cache memory capacity, though beneficial in general, does not guarantee a higher performance for all the applications as they may not utilize all of the cache efficiently. To utilize on-chip resources effectively and to accelerate the performance of multimedia applications specifically, we propose a new architecture---Adaptive Balanced Computing (ABC). ABC uses dynamic resource configuration of on-chip cache memory by integrating Reconfigurable Functional Caches (RFC). RFC can work as a conventional cache or as a specialized computing unit when necessary. In order to convert a cache memory to a computing unit, we include additional logic to embed multi-bit output LUTs into the cache structure. We add the reconfigurability of cache memory to a conventional processor with minimal modification to the load/store microarchitecture and with minimal compiler assistance. ABC architecture utilizes resources more efficiently by reconfiguring the cache memory to computing units dynamically. The area penalty for this reconfiguration is about 50--60% of the memory cell cache array-only area with faster cache access time. In a base array cache (parallel decoding caches), the area penalty is 10--20% of the data array with 1--2% increase in the cache access time. However, we save 27% for FIR and 44% for DCT/IDCT in area with respect to memory cell array cache and about 80% for both applications with respect to base array cache if we were to implement all these units separately (such as ASICs). The simulations with multimedia and DSP applications (DCT/IDCT and FIR/IIR) show that the resource configuration with the RFC speedups ranging from 1.04X to 3.94X in overall applications and from 2.61X to 27.4X in the core computations. The simulations with various parameters indicate that the impact of reconfiguration can be minimized if an appropriate cache organization is selected

Design automation of approximate circuits with runtime reconfigurable accuracy

Leveraging the inherent error tolerance of a vast number of application domains that are rapidly growing, approximate computing arises as a design alternative to improve the efficiency of our computing systems by trading accuracy for energy savings. However, the requirement for computational accuracy is not fixed. Controlling the applied level of approximation dynamically at runtime is a key to effectively optimize energy, while still containing and bounding the induced errors at runtime. In this paper, we propose and implement an automatic and circuit independent design framework that generates approximate circuits with dynamically reconfigurable accuracy at runtime. The generated circuits feature varying accuracy levels, supporting also accurate execution. Extensive experimental evaluation, using industry strength flow and circuits, demonstrates that our generated approximate circuits improve the energy by up to 41% for 2% error bound and by 17.5% on average under a pessimistic scenario that assumes full accuracy requirement in the 33% of the runtime. To demonstrate further the efficiency of our framework, we considered two state-of-the-art technology libraries which are a 7nm conventional FinFET and an emerging technology that boosts performance at a high cost of increased dynamic power

System configuration and executive requirements specifications for reusable shuttle and space station/base

System configuration and executive requirements specifications for reusable shuttle and space station/bas

Continuous-Time and Companding Digital Signal Processors Using Adaptivity and Asynchronous Techniques

The fully synchronous approach has been the norm for digital signal processors (DSPs) for many decades. Due to its simplicity, the classical DSP structure has been used in many applications. However, due to its rigid discrete-time operation, a classical DSP has limited efficiency or inadequate resolution for some emerging applications, such as processing of multimedia and biological signals. This thesis proposes fundamentally new approaches to designing DSPs, which are different from the classical scheme. The defining characteristic of all new DSPs examined in this thesis is the notion of "adaptivity" or "adaptability." Adaptive DSPs dynamically change their behavior to adjust to some property of their input stream, for example the rate of change of the input. This thesis presents both enhancements to existing adaptive DSPs, as well as new adaptive DSPs. The main class of DSPs that are examined throughout the thesis are continuous-time (CT) DSPs. CT DSPs are clock-less and event-driven; they naturally adapt their activity and power consumption to the rate of their inputs. The absence of a clock also provides a complete avoidance of aliasing in the frequency domain, hence improved signal fidelity. The core of this thesis deals with the complete and systematic design of a truly general-purpose CT DSP. A scalable design methodology for CT DSPs is presented. This leads to the main contribution of this thesis, namely a new CT DSP chip. This chip is the first general-purpose CT DSP chip, able to process many different classes of CT and synchronous signals. The chip has the property of handling various types of signals, i.e. various different digital modulations, both synchronous and asynchronous, without requiring any reconfiguration; such property is presented for the first time CT DSPs and is impossible for classical DSPs. As opposed to previous CT DSPs, which were limited to using only one type of digital format, and whose design was hard to scale for different bandwidths and bit-widths, this chip has a formal, robust and scalable design, due to the systematic usage of asynchronous design techniques. The second contribution of this thesis is a complete methodology to design adaptive delay lines. In particular, it is shown how to make the granularity, i.e. the number of stages, adaptive in a real-time delay line. Adaptive granularity brings about a significant improvement in the line's power consumption, up to 70% as reported by simulations on two design examples. This enhancement can have a direct large power impact on any CT DSP, since a delay line consumes the majority of a CT DSP's power. The robust methodology presented in this thesis allows safe dynamic reconfiguration of the line's granularity, on-the-fly and according to the input traffic. As a final contribution, the thesis also examines two additional DSPs: one operating the CT domain and one using the companding technique. The former operates only on level-crossing samples; the proposed methodology shows a potential for high-quality outputs by using a complex interpolation function. Finally, a companding DSP is presented for MPEG audio. Companding DSPs adapt their dynamic range to the amplitude of their input; the resulting can offer high-quality outputs even for small inputs. By applying companding to MPEG DSPs, it is shown how the DSP distortion can be made almost inaudible, without requiring complex arithmetic hardware