AC mains synchronization loop for precalculated-based PFC converters using the output voltage measure

Common implementations of power factor correction include sensors for the input and output voltages and the input current. Many alternatives have been considered to reduce the number of sensors, especially the current sensor. One strategy is to precalculate the duty cycles that must be applied to every ac main, so the system only needs to synchronize them with the input voltage, and include a simple output voltage loop. The main problem with this approach is the sensibility to any synchronization error, because the input current is not measured, so its evolution is not continuously corrected. This paper shows how the synchronization error alters the current and the power factor, and it proposes several methods to detect and correct this error. All methods use the output voltage ADC, which is already used to control the output voltage, so the cost of the system is not increased. This technique can also be applied to any current sensorless PFC converter, because they are usually affected by leading or lagging currents, so the synchronization can be modified to reduce these effects. Results show that the implementation of this synchronization loop keeps a high-power factor under a wide synchronization error range, while the added logic is not significant.This research was funded by Spanish Ministerio de Economía y Competitividad grant number TEC2013-43017-R

PV single-phase grid-connected converter : dc-link voltage sensorless prospective

In this paper, a dc-link voltage sensorless control technique is proposed for single-phase two-stage grid-coupled photovoltaic (PV) converters. Matching conventional control techniques, the proposed scheme assigns the function of PV maximum power point tracking to the chopper stage. However, in the inverter stage, conventional techniques employ two control loops: outer dc-link voltage and inner grid current control loops. Diversely, the proposed technique employs only current control loop and mitigates the voltage control loop, thus eliminating the dc-link high-voltage sensor. Hence, system cost and footprint are reduced, and control complexity is minimized. Furthermore, the removal of the dc-link voltage loop proportional-integral controller enhances system stability and improves its dynamic response during sudden environmental changes. The system simulation is carried out, and an experimental rig is implemented to validate the proposed technique effectiveness. In addition, the proposed technique is compared with the conventional one under varying irradiance conditions at different dc-link voltage levels, illustrating the enhanced capabilities of the proposed technique

State-of-art on permanent magnet brushless DC motor drives

Permanent magnet brushless DC (PMBLDC) motors are the latest choice of researchers due to their high efficiency, silent operation, compact size, high reliability and low maintenance requirements. These motors are preferred for numerous applications; however, most of them require sensorless control of these motors. The operation of PMBLDC motors requires rotor-position sensing for controlling the winding currents. The sensorless control would need estimation of rotor position from the voltage and current signals, which are easy to be sensed. This paper presents a state of art on PMBLDC motor drives with emphasis on sensorless control of these motors

Solar photovoltaic array fed brushless DC motor drive using sensorless technique for reducing vibration with Enhanced DC-DC converter

The proposed research work involves, solar photovoltaic array fed brushless DC motor drive using sensorless technique for reducing vibration with Enhanced DC-DC converter. The purpose of this research is to reduce the vibration in the motor drive and to improve the efficiency of the enhanced converter. The designed model consists of Buck and Boost converter, DC-link unit, state-of-the-art back-EMF sensing methods like terminal voltage, terminal current sensing and also includes third choral voltage amalgamation, back-emf integration and PWM strategies. In addition, reduced number of switches in the proposed research makes the scheme more outlay efficient and the motor speed is synchronized by PI controller. For sensing the vibration during rotation and shock in the brushless DC drive an accelerometer which is an electromechanical device are used, it measures acceleration forces associated to the freefall cause, path of the acceleration is a vector product. The current technique based on evaluation of various parameters are clearly modeled and experimented. A MATLAB platform and a hardware prototype of multioutput buck-boost converter are clearly examined for various effective environment in the proposed research

A Current-Sensorless Digital Controller for Active Power Factor Correction Control Based on Kalman Filters

For low-power AC-DC converters, power factor correction (PFC) can be accomplished simply with certain converters operating in discontinuous conduction mode (DCM). At higher power levels, DCM results in higher losses, so most PFC converters use current feedback to actively track the correct current waveshape. This work presents a way to provide PFC control without the current sensor, by replacing the sensor with a Kalman filter, which is essentially a stochastic observer. Experimental results verify its high power factor and low total harmonic distortion (THD)

Power quality enhancement in residential smart grids through power factor correction stages

The proliferation of non-linear loads and the increasing penetration of Distributed Energy Resources (DER) in Medium-Voltage (MV) and Low-Voltage (LV) distribution grids, make it more difficult to maintain the power quality levels in residential electrical grids, especially in the case of weak grids. Most household appliances contain a conventional Power Factor Corrector (PFC) rectifier, which maximizes the load Power Factor (PF) but does not contribute to the regulation of the voltage Total Harmonic Distortion (THDV) in residential electrical grids. This manuscript proposes a modification for PFC controllers by adapting the operation mode depending on the measured THDV. As a result, the PFCs operate either in a low current Total Harmonic Distortion (THDI) mode or in the conventional resistor emulator mode and contribute to the regulation of the THDV and the P F at the distribution feeders. To prove the concept, the modification is applied to a current sensorless Non-Linear Controller (NLC) applied to a single-phase Boost rectifier. Experimental results show its performance in a PFC front-end stage operating in Continuous Conduction Mode (CCM) connected to the grid with different THDV.This work is funded by the Spanish Ministry of Science and Innovation through the project TEC2014-52316-R ECOTREND Estimation and Optimal Control for Energy Conversion with Digital Devices