Initial results on fuzzy floating point computation for multimedia processors

During the recent years, the market of mid/low-end portable systems such as PDAs or mobile digital phones have experimented a revolution in both selling volume and features as handheld devices incorporate Multimedia applications. This fact brings to an increase in the computational demands of the devices, while still having the limitation of power (and energy) consumption. Instruction memoization is a promising technique to help alleviate the problem of power consumption of expensive functional units such as the floating-point one. Unfortunately, this technique could be energy-inefficient for low-end systems due to the additional power consumption of the relatively big tables required. In this paper we present a novel way of understanding multimedia floating point operations based on the fuzzy computation paradigm: losses in the computation precision may exchange performance for negligible errors in the output. Exploiting the implicit characteristics of media FP computation, we propose a new technique called fuzzy memoization. Fuzzy memoization expands the capabilities of classic memoization by attaching entries with similar inputs to the same output. We present a case of study for a SH4 like processor and report good performance and power-delay improvements with feasible hardware requirements.Peer ReviewedPostprint (published version

Fuzzy memoization for floating-point multimedia applications

Instruction memoization is a promising technique to reduce the power consumption and increase the performance of future low-end/mobile multimedia systems. Power and performance efficiency can be improved by reusing instances of an already executed operation. Unfortunately, this technique may not always be worth the effort due to the power consumption and area impact of the tables required to leverage an adequate level of reuse. In this paper, we introduce and evaluate a novel way of understanding multimedia floating-point operations based on the fuzzy computation paradigm: performance and power consumption can be improved at the cost of small precision losses in computation. By exploiting this implicit characteristic of multimedia applications, we propose a new technique called tolerant memoization. This technique expands the capabilities of classic memoization by associating entries with similar inputs to the same output. We evaluate this new technique by measuring the effect of tolerant memoization for floating-point operations in a low-power multimedia processor and discuss the trade-offs between performance and quality of the media outputs. We report energy improvements of 12 percent for a set of key multimedia applications with small LUT of 6 Kbytes, compared to 3 percent obtained using previously proposed techniques.Peer ReviewedPostprint (published version

Towards hardware acceleration of neuroevolution for multimedia processing applications on mobile devices

This paper addresses the problem of accelerating large artificial neural networks (ANN), whose topology and weights can evolve via the use of a genetic algorithm. The proposed digital hardware architecture is capable of processing any evolved network topology, whilst at the same time providing a good trade off between throughput, area and power consumption. The latter is vital for a longer battery life on mobile devices. The architecture uses multiple parallel arithmetic units in each processing element (PE). Memory partitioning and data caching are used to minimise the effects of PE pipeline stalling. A first order minimax polynomial approximation scheme, tuned via a genetic algorithm, is used for the activation function generator. Efficient arithmetic circuitry, which leverages modified Booth recoding, column compressors and carry save adders, is adopted throughout the design

Fuzzy Memoization for Floating-Point Multimedia Applications

Abstract-Instruction memoization is a promising technique to reduce the power consumption and increase the performance of future low-end/mobile multimedia systems. Power and performance efficiency can be improved by reusing instances of an already executed operation. Unfortunately, this technique may not always be worth the effort due to the power consumption and area impact of the tables required to leverage an adequate level of reuse. In this paper, we introduce and evaluate a novel way of understanding multimedia floating-point operations based on the fuzzy computation paradigm: Performance and power consumption can be improved at the cost of small precision losses in computation. By exploiting this implicit characteristic of multimedia applications, we propose a new technique called tolerant memoization. This technique expands the capabilities of classic memoization by associating entries with similar inputs to the same output. We evaluate this new technique by measuring the effect of tolerant memoization for floating-point operations in a low-power multimedia processor and discuss the trade-offs between performance and quality of the media outputs. We report energy improvements of 12 percent for a set of key multimedia applications with small LUT of 6 Kbytes, compared to 3 percent obtained using previously proposed techniques. Index Terms-Low-power design, special-purpose and application-based systems, real-time and embedded systems

Efficient Neural Network Implementations on Parallel Embedded Platforms Applied to Real-Time Torque-Vectoring Optimization Using Predictions for Multi-Motor Electric Vehicles

The combination of machine learning and heterogeneous embedded platforms enables new potential for developing sophisticated control concepts which are applicable to the field of vehicle dynamics and ADAS. This interdisciplinary work provides enabler solutions -ultimately implementing fast predictions using neural networks (NNs) on field programmable gate arrays (FPGAs) and graphical processing units (GPUs)- while applying them to a challenging application: Torque Vectoring on a multi-electric-motor vehicle for enhanced vehicle dynamics. The foundation motivating this work is provided by discussing multiple domains of the technological context as well as the constraints related to the automotive field, which contrast with the attractiveness of exploiting the capabilities of new embedded platforms to apply advanced control algorithms for complex control problems. In this particular case we target enhanced vehicle dynamics on a multi-motor electric vehicle benefiting from the greater degrees of freedom and controllability offered by such powertrains. Considering the constraints of the application and the implications of the selected multivariable optimization challenge, we propose a NN to provide batch predictions for real-time optimization. This leads to the major contribution of this work: efficient NN implementations on two intrinsically parallel embedded platforms, a GPU and a FPGA, following an analysis of theoretical and practical implications of their different operating paradigms, in order to efficiently harness their computing potential while gaining insight into their peculiarities. The achieved results exceed the expectations and additionally provide a representative illustration of the strengths and weaknesses of each kind of platform. Consequently, having shown the applicability of the proposed solutions, this work contributes valuable enablers also for further developments following similar fundamental principles.Some of the results presented in this work are related to activities within the 3Ccar project, which has received funding from ECSEL Joint Undertaking under grant agreement No. 662192. This Joint Undertaking received support from the European Union’s Horizon 2020 research and innovation programme and Germany, Austria, Czech Republic, Romania, Belgium, United Kingdom, France, Netherlands, Latvia, Finland, Spain, Italy, Lithuania. This work was also partly supported by the project ENABLES3, which received funding from ECSEL Joint Undertaking under grant agreement No. 692455-2

Deep Space Network information system architecture study

The purpose of this article is to describe an architecture for the Deep Space Network (DSN) information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990s. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies, such as the following: computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria