251 research outputs found

    High-Rate Space-Time Coded Large MIMO Systems: Low-Complexity Detection and Channel Estimation

    Full text link
    In this paper, we present a low-complexity algorithm for detection in high-rate, non-orthogonal space-time block coded (STBC) large-MIMO systems that achieve high spectral efficiencies of the order of tens of bps/Hz. We also present a training-based iterative detection/channel estimation scheme for such large STBC MIMO systems. Our simulation results show that excellent bit error rate and nearness-to-capacity performance are achieved by the proposed multistage likelihood ascent search (M-LAS) detector in conjunction with the proposed iterative detection/channel estimation scheme at low complexities. The fact that we could show such good results for large STBCs like 16x16 and 32x32 STBCs from Cyclic Division Algebras (CDA) operating at spectral efficiencies in excess of 20 bps/Hz (even after accounting for the overheads meant for pilot based training for channel estimation and turbo coding) establishes the effectiveness of the proposed detector and channel estimator. We decode perfect codes of large dimensions using the proposed detector. With the feasibility of such a low-complexity detection/channel estimation scheme, large-MIMO systems with tens of antennas operating at several tens of bps/Hz spectral efficiencies can become practical, enabling interesting high data rate wireless applications.Comment: v3: Performance/complexity comparison of the proposed scheme with other large-MIMO architectures/detectors has been added (Sec. IV-D). The paper has been accepted for publication in IEEE Journal of Selected Topics in Signal Processing (JSTSP): Spl. Iss. on Managing Complexity in Multiuser MIMO Systems. v2: Section V on Channel Estimation is update

    Advanced Wireless LAN

    Get PDF
    The past two decades have witnessed starling advances in wireless LAN technologies that were stimulated by its increasing popularity in the home due to ease of installation, and in commercial complexes offering wireless access to their customers. This book presents some of the latest development status of wireless LAN, covering the topics on physical layer, MAC layer, QoS and systems. It provides an opportunity for both practitioners and researchers to explore the problems that arise in the rapidly developed technologies in wireless LAN

    Advanced Equalization Techniques for Digital Coherent Optical Receivers

    Get PDF

    Towards Terabit Carrier Ethernet and Energy Efficient Optical Transport Networks

    Get PDF

    Algorithms for 5G physical layer

    Get PDF
    There is a great activity in the research community towards the investigations of the various aspects of 5G at different protocol layers and parts of the network. Among all, physical layer design plays a very important role to satisfy high demands in terms of data rates, latency, reliability and number of connected devices for 5G deployment. This thesis addresses he latest developments in the physical layer algorithms regarding the channel coding, signal detection, frame synchronization and multiple access technique in the light of 5G use cases. These developments are governed by the requirements of the different use case scenarios that are envisioned to be the driving force in 5G. All chapters from chapter 2 to 5 are developed around the need of physical layer algorithms dedicated to 5G use cases. In brief, this thesis focuses on design, analysis, simulation and he advancement of physical layer aspects such as 1. Reliability based decoding of short length Linear Block Codes (LBCs) with very good properties in terms of minimum hamming istance for very small latency requiring applications. In this context, we enlarge the grid of possible candidates by considering, in particular, short length LBCs (especially extended CH codes) with soft-decision decoding; 2. Efficient synchronization of preamble/postamble in a short bursty frame using modified Massey correlator; 3. Detection of Primary User activity using semiblind spectrum sensing algorithms and analysis of such algorithms under practical imperfections; 4. Design of optimal spreading matrix for a Low Density Spreading (LDS) technique in the context of non-orthogonal multiple access. In such spreading matrix, small number of elements in a spreading sequences are non zero allowing each user to spread its data over small number of chips (tones), thus simplifying the decoding procedure using Message Passing Algorithm (MPA)

    Overcoming CubeSat downlink limits with VITAMIN: a new variable coded modulation protocol

    Get PDF
    Thesis (M.S.) University of Alaska Fairbanks, 2013Many space missions, including low earth orbit CubeSats, communicate in a highly dynamic environment because of variations in geometry, weather, and interference. At the same time, most missions communicate using fixed channel codes, modulations, and symbol rates, resulting in a constant data rate that does not adapt to the dynamic conditions. When conditions are good, the fixed date rate can be far below the theoretical maximum, called the Shannon limit; when conditions are bad, the fixed data rate may not work at all. To move beyond these fixed communications and achieve higher total data volume from emerging high-tech instruments, this thesis investigates the use of error correcting codes and different modulations. Variable coded modulation (VCM) takes advantage of the dynamic link by transmitting more information when the signal-to-noise ratio (SNR) is high. Likewise, VCM can throttle down the information rate when SNR is low without having to stop all communications. VCM outperforms fixed communications which can only operate at a fixed information rate as long as a certain signal threshold is met. This thesis presents a new VCM protocol and tests its performance in both software and hardware simulations. The protocol is geared towards CubeSat downlinks as complexity is focused in the receiver, while the transmission operations are kept simple. This thesis explores bin-packing as a way to optimize the selection of VCM modes based on expected SNR levels over time. Working end-to-end simulations were created using MATLAB and LabVIEW, while the hardware simulations were done with software defined radios. Results show that a CubeSat using VCM communications will deliver twice the data throughput of a fixed communications system
    corecore