Maximum Wireless Power Transmission Using Real-Time Single Iteration Adaptive Impedance Matching

Wireless power transfer (WPT) systems’ efficiency is significantly impacted by non-monotonic variations in the coupling coefficient. For very short distances or strong-coupling cases, the WPT efficiency is minimal at the natural resonant frequency, with two peaks around this frequency, known as the frequency splitting phenomenon. On the other hand, WPT capability decreases for long distances or weak coupling cases. Therefore, adaptive matching is required for WPT systems with varying distances, like wireless charging systems for electric vehicles (EVs). This paper first presents a detailed analysis of the frequency splitting phenomenon by studying the root locations of the WPT system’s transfer function. Then, a real-time fixed-frequency adaptive impedance matching (IM) method is proposed, in which the amplitude and phase of the input impedance is estimated using the average active power, the average reactive power, and the amplitude of input voltage. Unlike traditional search-and-find techniques, the proposed method calculates the optimal IM network parameters only in a single iteration, which improves the convergent speed. A scaled-down 20-Watt prototype controlled by the TMSF2812 is fabricated and used to validate the effectiveness of the proposed method over a wide range of coil-to-coil distances

Wearable Nano-Based Gas Sensors for Environmental Monitoring and Encountered Challenges in Optimization

With a rising emphasis on public safety and quality of life, there is an urgent need to ensure optimal air quality, both indoors and outdoors. Detecting toxic gaseous compounds plays a pivotal role in shaping our sustainable future. This review aims to elucidate the advancements in smart wearable (nano)sensors for monitoring harmful gaseous pollutants, such as ammonia (NH3), nitric oxide (NO), nitrous oxide (N2O), nitrogen dioxide (NO2), carbon monoxide (CO), carbon dioxide (CO2), hydrogen sulfide (H2S), sulfur dioxide (SO2), ozone (O3), hydrocarbons (CxHy), and hydrogen fluoride (HF). Differentiating this review from its predecessors, we shed light on the challenges faced in enhancing sensor performance and offer a deep dive into the evolution of sensing materials, wearable substrates, electrodes, and types of sensors. Noteworthy materials for robust detection systems encompass 2D nanostructures, carbon nanomaterials, conducting polymers, nanohybrids, and metal oxide semiconductors. A dedicated section dissects the significance of circuit integration, miniaturization, real-time sensing, repeatability, reusability, power efficiency, gas-sensitive material deposition, selectivity, sensitivity, stability, and response/recovery time, pinpointing gaps in the current knowledge and offering avenues for further research. To conclude, we provide insights and suggestions for the prospective trajectory of smart wearable nanosensors in addressing the extant challenges

COBE's search for structure in the Big Bang

The launch of Cosmic Background Explorer (COBE) and the definition of Earth Observing System (EOS) are two of the major events at NASA-Goddard. The three experiments contained in COBE (Differential Microwave Radiometer (DMR), Far Infrared Absolute Spectrophotometer (FIRAS), and Diffuse Infrared Background Experiment (DIRBE)) are very important in measuring the big bang. DMR measures the isotropy of the cosmic background (direction of the radiation). FIRAS looks at the spectrum over the whole sky, searching for deviations, and DIRBE operates in the infrared part of the spectrum gathering evidence of the earliest galaxy formation. By special techniques, the radiation coming from the solar system will be distinguished from that of extragalactic origin. Unique graphics will be used to represent the temperature of the emitting material. A cosmic event will be modeled of such importance that it will affect cosmological theory for generations to come. EOS will monitor changes in the Earth's geophysics during a whole solar color cycle

NASA SBIR abstracts of 1992, phase 1 projects

The objectives of 346 projects placed under contract by the Small Business Innovation Research (SBIR) program of the National Aeronautics and Space Administration (NASA) are described. These projects were selected competitively from among proposals submitted to NASA in response to the 1992 SBIR Program Solicitation. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 346, in order of its appearance in the body of the report. Appendixes to provide additional information about the SBIR program and permit cross-reference of the 1992 Phase 1 projects by company name, location by state, principal investigator, NASA Field Center responsible for management of each project, and NASA contract number are included

Digitally Fabricated Epidermal Transfer Tattoo UHF Radio Frequency Identification Tags

This thesis focuses on the inkjet printing of UHF RFID tags in the form of transfer tattoos for use on the skin. Inkjet printing of these tags is proposed as a cheaper and more appropriate alternative to conventional etching. The work seeks to assesses the performance of inkjet printed epidermal RFID tags using parameters such as read range, transmitted power and backscattered power. The effect of different printing parameters such as the number of conductive ink layers, sintering time and temperature on the performance of the tags are assessed by simulation and measurement. Additionally, techniques to reduce the volume of conductive ink used for the fabrication of the tag are also examined and compared with an aim to determine which has the best achieved read range and ink utilization balance. This would help to reduce the cost of fabrication of the tags. Also, due to some defects being introduced to the tags during the printing process because of printing conditions and characteristics inherent to the printing technology, the effects of these defects on the performance of the printed tag is also examined by simulation and measurement. The robustness of the epidermal transfer tattoo tag was further experimentally determined by exposure to everyday use conditions and situations involving sweat and mechanical friction. Finally, a diversity study on an inkjet printed tag integrated with a medical sticking plaster was performed. This involved the use of two to four tags placed horizontally and vertically in order to determine which orientation offers better read coverage in each of the diversity setups while a volunteer carried out a set of motions

A Preventive Medicine Framework for Wearable Abiotic Glucose Detection System

In this work, we present a novel abiotic glucose fuel cell with battery-less remote access. In the presence of a glucose analyte, we characterized the power generation and biosensing capabilities. This system is developed on a flexible substrate in bacterial nanocellulose with gold nanoparticles used as a conductive ink for piezoelectric deposition based printing. The abiotic glucose fuel cell is constructed using colloidal platinum on gold (Au-co-Pt) and a composite of silver oxide nanoparticles and carbon nanotubes as the anodic and cathodic materials. At a concentration of 20 mM glucose, the glucose fuel cell produced a maximum open circuit voltage of 0.57 V and supplied a maximum short circuit current density of 0.581 mA/cm2 with a peak power density of 0.087 mW/cm2 . The system was characterized by testing its performance using electrochemical techniques like linear sweep voltammetry, cyclic voltammetry, chronoamperometry in the presence of various glucose level at the physiological temperatures. An open circuit voltage (Voc) of 0.43 V, short circuit current density (Isc) of 0.405 mA/cm2 , and maximum power density (Pmax) of 0.055 mW/cm2 at 0.23 V were achieved in the presence of 5 mM physiologic glucose. The results indicate that glucose fuel cells can be employed for the development of a self-powered glucose sensor. The glucose monitoring device demonstrated sensitivity of 1.87 uA/mMcm2 and a linear dynamic range of 1 mM to 45 mM with a correlation coefficient of 0.989 when utilized as a self-powered glucose sensor. For wireless communication, the incoming voltage from the abiotic fuel cell was fed to a low power microcontroller that enables battery less communication using NFC technology. The voltage translates to the NFC module as the digital signals, which are displayed on a custom-built android application. The digital signals are converted to respective glucose concentration using a correlation algorithm that allows data to be processed and recorded for further analysis. The android application is designed to record the time, date stamp, and other independent features (e.g. age, height, weight) with the glucose measurement to allow the end-user to keep track of their glucose levels regularly. Analytics based on in-vitro testing were conducted to build a machine learning model that enables future glucose prediction for 15, 30 or 60 minutes

Wind Power

This book is the result of inspirations and contributions from many researchers of different fields. A wide verity of research results are merged together to make this book useful for students and researchers who will take contribution for further development of the existing technology. I hope you will enjoy the book, so that my effort to bringing it together for you will be successful. In my capacity, as the Editor of this book, I would like to thanks and appreciate the chapter authors, who ensured the quality of the material as well as submitting their best works. Most of the results presented in to the book have already been published on international journals and appreciated in many international conferences