Index Modulation-based Information Harvesting for Far-Field RF Power Transfer

While wireless information transmission (WIT) is evolving into its sixth generation (6G), maintaining terminal operations that rely on limited battery capacities has become one of the most paramount challenges for Internet-of-Things (IoT) platforms. In this respect, there exists a growing interest in energy harvesting technology from ambient resources, and wireless power transfer (WPT) can be the key solution towards enabling battery-less infrastructures referred to as zero-power communication technology. Indeed, eclectic integration approaches between WPT and WIT mechanisms are becoming a vital necessity to limit the need for replacing batteries. Beyond the conventional separation between data and power components of the emitted waveforms, as in simultaneous wireless information and power transfer (SWIPT) mechanisms, a novel protocol referred to as information harvesting (IH) has recently emerged. IH leverages existing WPT mechanisms for data communication by incorporating index modulation (IM) techniques on top of the existing far-field power transfer mechanism. In this paper, a unified framework for the IM-based IH mechanisms has been presented where the feasibility of various IM techniques are evaluated based on different performance metrics. The presented results demonstrate the substantial potential to enable data communication within existing far-field WPT systems, particularly in the context of next-generation IoT wireless networks.Comment: 13 pages, 9 figure

Sensors and Systems for Indoor Positioning

This reprint is a reprint of the articles that appeared in Sensors' (MDPI) Special Issue on “Sensors and Systems for Indoor Positioning". The published original contributions focused on systems and technologies to enable indoor applications

Hybrid Free-Space Optical and Visible Light Communication Link

V součastnosti bezdrátové optické komunikace (optical wireless communication, OWC) získávají širokou pozornost jako vhodný doplněk ke komunikačním přenosům v rádiovém pásmu. OWC nabízejí několik výhod včetně větší šířky přenosového pásma, neregulovaného frekvenčního pásma či odolnosti vůči elektromagnetickému rušení. Tato práce se zabývá návrhem OWC systémů pro připojení koncových uživatelů. Samotná realizace spojení může být provedena za pomoci různých variant bezdrátových technologií, například pomocí OWC, kombinací různých OWC technologií nebo hybridním rádio-optickým spojem. Za účelem propojení tzv. poslední míle je analyzován optický bezvláknový spoj (free space optics, FSO). Tato práce se dále zabývá analýzou přenosových vlastností celo-optického více skokového spoje s důrazem na vliv atmosférických podmínek. V dnešní době mnoho uživatelů tráví čas ve vnitřních prostorech kanceláří či doma, kde komunikace ve viditelném spektru (visible light communication, VLC) poskytuje lepší přenosové parametry pokrytí než úzce směrové FSO. V rámci této práce byla odvozena a experimentálně ověřena závislost pro bitovou chybovost přesměrovaného (relaying) spoje ve VLC. Pro propojení poskytovatele datavých služeb s koncovým uživatelem může být výhodné zkombinovat více přenosových technologií. Proto je navržen a analyzovám systém pro překonání tzv. problému poslední míle a posledního metru kombinující hybridní FSO a VLC technologie.The field of optical wireless communications (OWC) has recently attracted significant attention as a complementary technology to radio frequency (RF). OWC systems offer several advantages including higher bandwidth, an unregulated spectrum, resistance to electromagnetic interference and a high order of reusability. The thesis focuses on the deployment and analyses of end-user interconnections using the OWC systems. Interconnection can be established by many wireless technologies, for instance, by a single OWC technology, a combination of OWC technologies, or by hybrid OWC/RF links. In order to establish last mile outdoor interconnection, a free-space optical (FSO) has to be investigated. In this thesis, the performance of all-optical multi-hop scenarios is analyzed under atmospheric conditions. However, nowadays, many end users spend much time in indoor environments where visible light communication (VLC) technology can provide better transmission parameters and, significantly, better coverage. An analytical description of bit error rate for relaying VLC schemes is derived and experimentally verified. Nonetheless, for the last mile, interconnection of a provider and end users (joint outdoor and indoor connection) can be advantageous when combining multiple technologies. Therefore, a hybrid FSO/VLC system is proposed and analyzed for the interconnection of the last mile and last meter bottleneck

Analysis of random orientation and user mobility in LiFi networks

Mobile data traffic is anticipated to surpass 49 exabyte per month by 2021. Smartphones, as the main factor of generating this huge data traffic (86%), are expected to require average speed connection of 20 Mbps by 2021. Light-fidelity (LiFi) is a novel bidirectional, high-speed and fully networked optical wireless communication and it is a promising solution to undertake this huge data traffic. However, to support seamless connectivity in LiFi networks, real-time knowledge of channel state information (CSI) from each user is required at the LiFi access point (AP). The CSI availability enables us to achieve optimal resource allocation and throughput maximization but it requires feedback transmitted through the uplink channel. Furthermore, the important aspects of the indoor LiFi channel such as the random orientation of user device, user mobility and link blockage need to be carefully analysed and effective solutions should be developed. In contrast to radio frequency (RF) channels, the LiFi channel is relatively less random. This feature of LiFi channel enables a potential reduction in the amount of feedback required to achieve high throughputs in a dynamic LiFi network. Based on this feature, two techniques for reducing the amount of feedback in LiFi cellular networks are proposed: 1) limited-content feedback scheme based on reducing the content of feedback information and 2) limited-frequency feedback scheme based on the update interval. It is shown that these limited-feedback schemes can provide almost the same downlink performance as full feedback scheme. Furthermore, an optimum update interval which provides maximum bidirectional user equipment (UE) throughput, has been derived. Device orientation and its statistics is an important determinant factor that can affect the users throughput remarkably in LiFi networks. However, device orientation has been ignored in many previous performance studies of LiFi networks due to the lack of a proper statistical model. In this thesis, a novel model for the orientation of user device are proposed based on experimental measurements. The statistics of the device orientation for both sitting and walking activities are presented. Moreover, the statistics of the line-of-sight (LOS) channel gain are calculated. The influence of random device orientation on the received signal-to-noise-ratio (SNR) and bit-error ratio (BER) performance of LiFi systems has been also evaluated. To support the seamless connectivity of future LiFi-enabled devices in the presence of random device orientation, mobility and blockage, efficient handover between APs are required. In this thesis, an orientation-based random waypoint (ORWP) mobility model is proposed to analyze the performance of mobile users considering the effect of random device orientation. Based on this model, an analysis of handover due to random orientation and user mobility is presented. Finally, in order to improve seamless connectivity, a multi-directional receiver (MDR) configuration is proposed. The MDR configuration shows a robust performance in the presence of user mobility, random device orientation and blockage

Resource allocation for 5G technologies under statistical queueing constraints

As the launch of fifth generation (5G) wireless networks is approaching, recent years have witnessed comprehensive discussions about a possible 5G standard. Many transmission scenarios and technologies have been proposed and initial over-the-air experimental trials have been conducted. Most of the existing literature studies on 5G technologies have mainly focused on the physical layer parameters and quality of service (QoS) requirements, e.g., achievable data rates. However, the demand for delay-sensitive data traffic over wireless networks has increased exponentially in the recent years, and is expected to further increase by the time of 5G. Therefore, other constraints at the data-link layer concerning the buffer overflow and delay violation probabilities should also be regarded. It follows that evaluating the performance of the 5G technologies when such constraints are considered is a timely task. Motivated by this fact, in this thesis we explore the performance of three promising 5G technologies when operating under certain QoS at the data-link layer. We follow a cross-layer approach to examine the interplay between the physical and data-link layers when statistical QoS constraints are inflicted in the form of limits on the delay violation and buffer overflow probabilities. Noting that wireless systems, generally, have limited physical resources, in this thesis we mainly target designing adaptive resource allocation schemes to maximize the system performance under such QoS constraints. We initially investigate the throughput and energy efficiency of a general class of multiple-input multiple-output (MIMO) systems with arbitrary inputs. As a cross-layer evaluation tool, we employ the effective capacity as the main performance metric, which is the maximum constant data arrival rate at a buffer that can be sustained by the channel service process under specified QoS constraints. We obtain the optimal input covariance matrix that maximizes the effective capacity under a short-term average power budget. Then, we perform an asymptotic analysis of the effective capacity in the low signal-to-noise ratio and large-scale antenna (massive MIMO) regimes. Such analysis has a practical importance for 5G scenarios that necessitate low latency, low power consumption, and/or ability to simultaneously support massive number of users. Non-orthogonal multiple access (NOMA) has attracted significant attention in the recent years as a promising multiple access technology for 5G. In this thesis, we consider a two-user power-domain NOMA scheme in which both transmitters employ superposition coding and the receiver applies successive interference cancellation (SIC) with a certain order. For practical concerns, we consider limited transmission power budgets at the transmitters, and assume that both transmitters have arbitrarily distributed input signals. We again exploit the effective capacity as the main cross-layer performance measure. We provide a resource management scheme that can jointly obtain the optimal power allocation policies at the transmitters and the optimal decoding order at the receiver, with the goal of maximizing the effective capacity region that provides the maximum allowable sustainable arrival rate region at the transmitters' buffers under QoS guarantees. In the recent years, visible light communication (VLC) has emerged as a potential transmission technology that can utilize the visible light spectrum for data transmission along with illumination. Different from the existing literature studies on VLC, in this thesis we consider a VLC system in which the access point (AP) is unaware of the channel conditions, thus the AP sends the data at a fixed rate. Under this assumption, and considering an ON-OFF data source, we provide a cross-layer study when the system is subject to statistical buffering constraints. To this end, we employ the maximum average data arrival rate at the AP buffer and the non-asymptotic bounds on buffering delay as the main performance measures. To facilitate our analysis, we adopt a two-state Markov process to model the fixed-rate transmission strategy, and we then formulate the steady-state probabilities of the channel being in the ON and OFF states. The coexistence of radio frequency (RF) and VLC systems in typical indoor environments can be leveraged to support vast user QoS needs. In this thesis, we examine the benefits of employing both technologies when operating under statistical buffering limitations. Particularly, we consider a multi-mechanism scenario that utilizes RF and VLC links for data transmission in an indoor environment. As the transmission technology is the main physical resource to be concerned in this part, we propose a link selection process through which the transmitter sends data over the link that sustains the desired QoS guarantees the most. Considering an ON-OFF data source, we employ the maximum average data arrival rate at the transmitter buffer and the non-asymptotic bounds on data buffering delay as the main performance measures. We formulate the performance measures under the assumption that both links are subject to average and peak power constraints