Wi-Fi Finger-Printing Based Indoor Localization Using Nano-Scale Unmanned Aerial Vehicles

Explosive growth in the number of mobile devices like smartphones, tablets, and smartwatches has escalated the demand for localization-based services, spurring development of numerous indoor localization techniques. Especially, widespread deployment of wireless LANs prompted ever increasing interests in WiFi-based indoor localization mechanisms. However, a critical shortcoming of such localization schemes is the intensive time and labor requirements for collecting and building the WiFi fingerprinting database, especially when the system needs to cover a large space. In this thesis, we propose to automate the WiFi fingerprint survey process using a group of nano-scale unmanned aerial vehicles (NAVs). The proposed system significantly reduces the efforts for collecting WiFi fingerprints. Furthermore, since these NAVs explore a 3D space, the WiFi fingerprints of a 3D space can be obtained increasing the localization accuracy. The proposed system is implemented on a commercially available miniature open-source quadcopter platform by integrating a contemporary WiFi - fingerprint - based localization system. Experimental results demonstrate that the localization error is about 2m, which exhibits only about 20cm of accuracy degradation compared with the manual WiFi fingerprint survey methods

Robust blimps formation using wireless sensor based on Received Signal Strength Indication (RSSI) localization method

This paper suggests the wireless communication technique used to determine the information of blimp localization (distance and orientation) via wireless sensor network (WSN) protocol. In cooperative decentralized system, information exchanges between the agents are crucial. Each agent is required to share data to enable individual decision making task. In this work, the WSN were used as the data communications protocol which provides robust communication using the mesh networking. In order to support the multi agent communication network, the reliability of data needs to be proved. The performances of the communication selection were studied through experimental and simulation approach. The experimental results showed that the RSSI value from the device provided good statically data fit using the R-square with value of 0.947. This paper also proposed a new mobile node arrangement with hexagonal anchor node arrangement based on water particles formation. The node arrangement was simulated using the Senelex™ and showed low absolute error position thus achieving the desired cooperative system requirement

Navigation and Applicability of Hexa Rotor Drones in Greenhouse Environment

The paper discusses use-cases and a broad description of application possibilities of drones in greenhouses. Unmanned autonomous aerial vehicles (UAV), i.e. drones, are being used increasingly often for the direct or indirect collection of data. GPS navigation cannot be applied in an indoor work environment. One of the alternatives is to measure the distance from a fixed set of sensors with known positions. The paper presents a dynamic model for a hexa-rotor drone. In order to ensure reliable navigation a new navigation algorithm is presented based on the two-dimensional navigation algorithm of the robot motion control. It demonstrates the development of a threedimensional navigation algorithm for the hexa-rotor drone with the hypothesis that the elaborate three-dimensional model can navigate the drone in an indoor environment. To prove the hypothesis, the simulation is implemented in Scilab environment with information about the flight path deviation from the planned routes, which is also given in the work

Review of UAV positioning in indoor environments and new proposal based on US measurements

Este documento se considera que es una ponencia de congresos en lugar de un capítulo de libro.10th International Conference on Indoor Positioning and Indoor Navigation (IPIN 2019) Pisa, Italy, September 30th - October 3rd, 2019The use of unmanned aerial vehicles (UAVs) has increased dramatically in recent years because of their huge potential in both civil and military applications and the decrease in prize of UAVs products. Location detection can be implemented through GNSS technology in outdoor environments, nevertheless its accuracy could be insufficient for some applications. Usability of GNSS in indoor environments is limited due to the signal attenuation as it cross through walls or the absence of line of sight. Considering the big market opportunity of indoor UAVs many researchers are devoting their efforts in the exploration of solutions for their positioning. Indoor UAV applications include location based services (LBS), advertisement, ambient assisted living environments or emergency response. This work is an update survey in UAV indoor localization, so it can provide a guide and technical comparison perspective of different technologies with their main advantages and drawbacks. Finally, we propose an approach based on an ultrasonic local positioning system.Universidad de AlcaláJunta de Comunidades de Castilla-La ManchaMinisterio de Economía, Industria y Competitivida

Integrated Satellite-terrestrial networks for IoT: LoRaWAN as a Flying Gateway

When the Internet of Things (IoT) was introduced, it causes an immense change in human life. Recently, different IoT emerging use cases, which will involve an even higher number of connected devices aimed at collecting and sending data with different purposes and over different application scenarios, such as smart city, smart factory, and smart agriculture. In some cases, the terrestrial infrastructure is not enough to guarantee the typical performance indicators due to its design and intrinsic limitations. Coverage is an example, where the terrestrial infrastructure is not able to cover certain areas such as remote and rural areas. Flying technologies, such as communication satellites and Unmanned Aerial Vehicles (UAVs), can contribute to overcome the limitations of the terrestrial infrastructure, offering wider coverage, higher resilience and availability, and improving user\u2019s Quality of Experience (QoE). IoT can benefit from the UAVs and satellite integration in many ways, also beyond the coverage extension and the increase of the available bandwidth that these objects can offer. This thesis proposes the integration of both IoT and UAVs to guarantee the increased coverage in hard to reach and out of coverage areas. Its core focus addresses the development of the IoT flying gateway and data mule and testing both approaches to show their feasibility. The first approach for the integration of IoT and UAV results in the implementing of LoRa flying gateway with the aim of increasing the IoT communication protocols\u2019 coverage area to reach remote and rural areas. This flying gateway examines the feasibility for extending the coverage in a remote area and transmitting the data to the IoT cloud in real-time. Moreover, it considers the presence of a satellite between the gateway and the final destination for areas with no Internet connectivity and communication means such as WiFi, Ethernet, 4G, or LTE. The experimental results have shown that deploying a LoRa gateway on board a flying drone is an ideal option for the extension of the IoT network coverage in rural and remote areas. The second approach for the integration of the aforementioned technologies is the deployment of IoT data mule concept for LoRa networks. The difference here is the storage of the data on board of the gateway and not transmitting the data to the IoT cloud in real time. The aim of this approach is to receive the data from the LoRa sensors installed in a remote area, store them in the gateway up until this flying gateway is connected to the Internet. The experimental results have shown the feasibility of our flying data mule in terms of signal quality, data delivery, power consumption and gateway status. The third approach considers the security aspect in LoRa networks. The possible physical attacks that can be performed on any LoRa device can be performed once its location is revealed. Position estimation was carried out using one of the LoRa signal features: RSSI. The values of RSSI are fed to the Trilateration localization algorithm to estimate the device\u2019s position. Different outdoor tests were done with and without the drone, and the results have shown that RSSI is a low cost option for position estimation that can result in a slight error due to different environmental conditions that affect the signal quality. In conclusion, by adopting both IoT technology and UAV, this thesis advances the development of flying LoRa gateway and LoRa data mule for the aim of increasing the coverage of LoRa networks to reach rural and remote areas. Moreover, this research could be considered as the first step towards the development of high quality and performance LoRa flying gateway to be tested and used in massive LoRa IoT networks in rural and remote areas