2,336 research outputs found
A survey of localization in wireless sensor network
Localization is one of the key techniques in wireless sensor network. The location estimation methods can be classified into target/source localization and node self-localization. In target localization, we mainly introduce the energy-based method. Then we investigate the node self-localization methods. Since the widespread adoption of the wireless sensor network, the localization methods are different in various applications. And there are several challenges in some special scenarios. In this paper, we present a comprehensive survey of these challenges: localization in non-line-of-sight, node selection criteria for localization in energy-constrained network, scheduling the sensor node to optimize the tradeoff between localization performance and energy consumption, cooperative node localization, and localization algorithm in heterogeneous network. Finally, we introduce the evaluation criteria for localization in wireless sensor network
Thirty Years of Machine Learning: The Road to Pareto-Optimal Wireless Networks
Future wireless networks have a substantial potential in terms of supporting
a broad range of complex compelling applications both in military and civilian
fields, where the users are able to enjoy high-rate, low-latency, low-cost and
reliable information services. Achieving this ambitious goal requires new radio
techniques for adaptive learning and intelligent decision making because of the
complex heterogeneous nature of the network structures and wireless services.
Machine learning (ML) algorithms have great success in supporting big data
analytics, efficient parameter estimation and interactive decision making.
Hence, in this article, we review the thirty-year history of ML by elaborating
on supervised learning, unsupervised learning, reinforcement learning and deep
learning. Furthermore, we investigate their employment in the compelling
applications of wireless networks, including heterogeneous networks (HetNets),
cognitive radios (CR), Internet of things (IoT), machine to machine networks
(M2M), and so on. This article aims for assisting the readers in clarifying the
motivation and methodology of the various ML algorithms, so as to invoke them
for hitherto unexplored services as well as scenarios of future wireless
networks.Comment: 46 pages, 22 fig
Hybrid Radio-map for Noise Tolerant Wireless Indoor Localization
In wireless networks, radio-map based locating techniques are commonly used
to cope the complex fading feature of radio signal, in which a radio-map is
built by calibrating received signal strength (RSS) signatures at training
locations in the offline phase. However, in severe hostile environments, such
as in ship cabins where severe shadowing, blocking and multi-path fading
effects are posed by ubiquitous metallic architecture, even radio-map cannot
capture the dynamics of RSS. In this paper, we introduced multiple feature
radio-map location method for severely noisy environments. We proposed to add
low variance signature into radio map. Since the low variance signatures are
generally expensive to obtain, we focus on the scenario when the low variance
signatures are sparse. We studied efficient construction of multi-feature
radio-map in offline phase, and proposed feasible region narrowing down and
particle based algorithm for online tracking. Simulation results show the
remarkably performance improvement in terms of positioning accuracy and
robustness against RSS noises than the traditional radio-map method.Comment: 6 pages, 11th IEEE International Conference on Networking, Sensing
and Control, April 7-9, 2014, Miami, FL, US
Group-In: Group Inference from Wireless Traces of Mobile Devices
This paper proposes Group-In, a wireless scanning system to detect static or
mobile people groups in indoor or outdoor environments. Group-In collects only
wireless traces from the Bluetooth-enabled mobile devices for group inference.
The key problem addressed in this work is to detect not only static groups but
also moving groups with a multi-phased approach based only noisy wireless
Received Signal Strength Indicator (RSSIs) observed by multiple wireless
scanners without localization support. We propose new centralized and
decentralized schemes to process the sparse and noisy wireless data, and
leverage graph-based clustering techniques for group detection from short-term
and long-term aspects. Group-In provides two outcomes: 1) group detection in
short time intervals such as two minutes and 2) long-term linkages such as a
month. To verify the performance, we conduct two experimental studies. One
consists of 27 controlled scenarios in the lab environments. The other is a
real-world scenario where we place Bluetooth scanners in an office environment,
and employees carry beacons for more than one month. Both the controlled and
real-world experiments result in high accuracy group detection in short time
intervals and sampling liberties in terms of the Jaccard index and pairwise
similarity coefficient.Comment: This work has been funded by the EU Horizon 2020 Programme under
Grant Agreements No. 731993 AUTOPILOT and No.871249 LOCUS projects. The
content of this paper does not reflect the official opinion of the EU.
Responsibility for the information and views expressed therein lies entirely
with the authors. Proc. of ACM/IEEE IPSN'20, 202
Robotic Wireless Sensor Networks
In this chapter, we present a literature survey of an emerging, cutting-edge,
and multi-disciplinary field of research at the intersection of Robotics and
Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor
Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system
that aims to achieve certain sensing goals while meeting and maintaining
certain communication performance requirements, through cooperative control,
learning and adaptation. While both of the component areas, i.e., Robotics and
WSN, are very well-known and well-explored, there exist a whole set of new
opportunities and research directions at the intersection of these two fields
which are relatively or even completely unexplored. One such example would be
the use of a set of robotic routers to set up a temporary communication path
between a sender and a receiver that uses the controlled mobility to the
advantage of packet routing. We find that there exist only a limited number of
articles to be directly categorized as RWSN related works whereas there exist a
range of articles in the robotics and the WSN literature that are also relevant
to this new field of research. To connect the dots, we first identify the core
problems and research trends related to RWSN such as connectivity,
localization, routing, and robust flow of information. Next, we classify the
existing research on RWSN as well as the relevant state-of-the-arts from
robotics and WSN community according to the problems and trends identified in
the first step. Lastly, we analyze what is missing in the existing literature,
and identify topics that require more research attention in the future
Managing big data experiments on smartphones
The explosive number of smartphones with ever growing sensing and computing capabilities have brought a paradigm shift to many traditional domains of the computing field. Re-programming smartphones and instrumenting them for application testing and data gathering at scale is currently a tedious and time-consuming process that poses significant logistical challenges. Next generation smartphone applications are expected to be much larger-scale and complex, demanding that these undergo evaluation and testing under different real-world datasets, devices and conditions. In this paper, we present an architecture for managing such large-scale data management experiments on real smartphones. We particularly present the building blocks of our architecture that encompassed smartphone sensor data collected by the crowd and organized in our big data repository. The given datasets can then be replayed on our testbed comprising of real and simulated smartphones accessible to developers through a web-based interface. We present the applicability of our architecture through a case study that involves the evaluation of individual components that are part of a complex indoor positioning system for smartphones, coined Anyplace, which we have developed over the years. The given study shows how our architecture allows us to derive novel insights into the performance of our algorithms and applications, by simplifying the management of large-scale data on smartphones
A Survey of Positioning Systems Using Visible LED Lights
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe
- …