6,002 research outputs found
Tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi MARA terhadap mata pelajaran Bahasa Inggeris
Kajian ini dilakukan untuk mengenal pasti tahap penguasaan, sikap dan minat pelajar
Kolej Kemahiran Tinggi Mara Sri Gading terhadap Bahasa Inggeris. Kajian yang
dijalankan ini berbentuk deskriptif atau lebih dikenali sebagai kaedah tinjauan. Seramai
325 orang pelajar Diploma in Construction Technology dari Kolej Kemahiran Tinggi
Mara di daerah Batu Pahat telah dipilih sebagai sampel dalam kajian ini. Data yang
diperoleh melalui instrument soal selidik telah dianalisis untuk mendapatkan
pengukuran min, sisihan piawai, dan Pekali Korelasi Pearson untuk melihat hubungan
hasil dapatan data. Manakala, frekuensi dan peratusan digunakan bagi mengukur
penguasaan pelajar. Hasil dapatan kajian menunjukkan bahawa tahap penguasaan
Bahasa Inggeris pelajar adalah berada pada tahap sederhana manakala faktor utama yang
mempengaruhi penguasaan Bahasa Inggeris tersebut adalah minat diikuti oleh sikap.
Hasil dapatan menggunakan pekali Korelasi Pearson juga menunjukkan bahawa terdapat
hubungan yang signifikan antara sikap dengan penguasaan Bahasa Inggeris dan antara
minat dengan penguasaan Bahasa Inggeris. Kajian menunjukkan bahawa semakin positif
sikap dan minat pelajar terhadap pengajaran dan pembelajaran Bahasa Inggeris semakin
tinggi pencapaian mereka. Hasil daripada kajian ini diharapkan dapat membantu pelajar
dalam meningkatkan penguasaan Bahasa Inggeris dengan memupuk sikap positif dalam
diri serta meningkatkan minat mereka terhadap Bahasa Inggeris dengan lebih baik. Oleh
itu, diharap kajian ini dapat memberi panduan kepada pihak-pihak yang terlibat dalam
membuat kajian yang akan datang
Evaluating indoor positioning systems in a shopping mall : the lessons learned from the IPIN 2018 competition
The Indoor Positioning and Indoor Navigation (IPIN) conference holds an annual competition in which indoor localization systems from different research groups worldwide are evaluated empirically. The objective of this competition is to establish a systematic evaluation methodology with rigorous metrics both for real-time (on-site) and post-processing (off-site) situations, in a realistic environment unfamiliar to the prototype developers. For the IPIN 2018 conference, this competition was held on September 22nd, 2018, in Atlantis, a large shopping mall in Nantes (France). Four competition tracks (two on-site and two off-site) were designed. They consisted of several 1 km routes traversing several floors of the mall. Along these paths, 180 points were topographically surveyed with a 10 cm accuracy, to serve as ground truth landmarks, combining theodolite measurements, differential global navigation satellite system (GNSS) and 3D scanner systems. 34 teams effectively competed. The accuracy score corresponds to the third quartile (75th percentile) of an error metric that combines the horizontal positioning error and the floor detection. The best results for the on-site tracks showed an accuracy score of 11.70 m (Track 1) and 5.50 m (Track 2), while the best results for the off-site tracks showed an accuracy score of 0.90 m (Track 3) and 1.30 m (Track 4). These results showed that it is possible to obtain high accuracy indoor positioning solutions in large, realistic environments using wearable light-weight sensors without deploying any beacon. This paper describes the organization work of the tracks, analyzes the methodology used to quantify the results, reviews the lessons learned from the competition and discusses its future
Technologies and solutions for location-based services in smart cities: past, present, and future
Location-based services (LBS) in smart cities have drastically altered the way cities operate, giving a new dimension to the life of citizens. LBS rely on location of a device, where proximity estimation remains at its core. The applications of LBS range from social networking and marketing to vehicle-toeverything communications. In many of these applications, there is an increasing need and trend to learn the physical distance between nearby devices. This paper elaborates upon the current needs of proximity estimation in LBS and compares them against the available Localization and Proximity (LP) finding technologies (LP technologies in short). These technologies are compared for their accuracies and performance based on various different parameters, including latency, energy consumption, security, complexity, and throughput. Hereafter, a classification of these technologies, based on various different smart city applications, is presented. Finally, we discuss some emerging LP technologies that enable proximity estimation in LBS and present some future research areas
Increasing the Efficiency of 6-DoF Visual Localization Using Multi-Modal Sensory Data
Localization is a key requirement for mobile robot autonomy and human-robot
interaction. Vision-based localization is accurate and flexible, however, it
incurs a high computational burden which limits its application on many
resource-constrained platforms. In this paper, we address the problem of
performing real-time localization in large-scale 3D point cloud maps of
ever-growing size. While most systems using multi-modal information reduce
localization time by employing side-channel information in a coarse manner (eg.
WiFi for a rough prior position estimate), we propose to inter-weave the map
with rich sensory data. This multi-modal approach achieves two key goals
simultaneously. First, it enables us to harness additional sensory data to
localise against a map covering a vast area in real-time; and secondly, it also
allows us to roughly localise devices which are not equipped with a camera. The
key to our approach is a localization policy based on a sequential Monte Carlo
estimator. The localiser uses this policy to attempt point-matching only in
nodes where it is likely to succeed, significantly increasing the efficiency of
the localization process. The proposed multi-modal localization system is
evaluated extensively in a large museum building. The results show that our
multi-modal approach not only increases the localization accuracy but
significantly reduces computational time.Comment: Presented at IEEE-RAS International Conference on Humanoid Robots
(Humanoids) 201
Map++: A Crowd-sensing System for Automatic Map Semantics Identification
Digital maps have become a part of our daily life with a number of commercial
and free map services. These services have still a huge potential for
enhancement with rich semantic information to support a large class of mapping
applications. In this paper, we present Map++, a system that leverages standard
cell-phone sensors in a crowdsensing approach to automatically enrich digital
maps with different road semantics like tunnels, bumps, bridges, footbridges,
crosswalks, road capacity, among others. Our analysis shows that cell-phones
sensors with humans in vehicles or walking get affected by the different road
features, which can be mined to extend the features of both free and commercial
mapping services. We present the design and implementation of Map++ and
evaluate it in a large city. Our evaluation shows that we can detect the
different semantics accurately with at most 3% false positive rate and 6% false
negative rate for both vehicle and pedestrian-based features. Moreover, we show
that Map++ has a small energy footprint on the cell-phones, highlighting its
promise as a ubiquitous digital maps enriching service.Comment: Published in the Eleventh Annual IEEE International Conference on
Sensing, Communication, and Networking (IEEE SECON 2014
A Survey of Positioning Systems Using Visible LED Lights
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe
- …