WiFi-based PCL for monitoring private airfields

In this article, the potential exploitation of WiFi-based PCL systems is investigated with reference to a real-world civil application in which these sensors are expected to nicely complement the existing technologies adopted for monitoring purposes, especially when operating against noncooperative targets. In particular, we consider the monitoring application of small private airstrips or airfields. With this terminology, we refer to open areas designated for the takeoff and landing of small aircrafts that, unlike an airport, have generally short and possibly unpaved runways (e.g., grass, dirt, sand, or gravel surfaces) and do not necessarily have terminals. More important, such areas usually are devoid of conventional technologies, equipment, or procedures adopted to guarantee safety and security in large aerodromes.There exist a huge number of small, privately owned, and unlicensed airfields around the world. Private aircraft owners mainly use these “airports” for recreational, single-person, or private flights for small groups and training flight purposes. In addition, residential airparks have proliferated in recent years, especially inthe United States, Canada, and South Africa. A residential airpark, or “fly-in community,” features common airstrips where homes with attached hangars allow owners to taxi from their hangar to a shared runway. In many cases, roads are dual use for both cars and planes.In such scenarios, the possibility to employ low-cost, compact, nonintrusive, and nontransmitting sensors as a way to improve safety and security with limited impact on the airstrips' users would be of great potential interest. To this purpose, WiFi-based passive radar sensors appear to be good candidates [23]. Therefore, we investigate their application against typical operative conditions experienced in the scenarios described earlier. The aim is to assess the capability to detect, localize, and track authorized and unauthorized targets that can be occupying the runway and the surrounding areas

Short-range passive radar for small private airports surveillance

This paper investigates the effectiveness of a passive radar for enhancing the security level in small airports and private runways. Specifically WiFi transmissions are parasitically exploited to perform detection and localization of non-cooperative targets that can be occupying the runway and the surrounding areas. Targets of interest include light/ultralight aircrafts, vehicles, people and even animals that may intrude onto the runways either intentionally or accidentally. The experimental results obtained by means of an experimental setup developed at SAPIENZA University of Rome prove the successful applicability of the proposed approach for small airports surveillance. © 2016 EuMA

Development of an Emergency Radio Beacon for Small Unmanned Aerial Vehicles

Emergency locator transmitters (ELTs) used to locate manned aircrafts are not well suited to find and recover small crashed unmanned aerial vehicles (UAVs). ELTs utilize an international satellite system for search and rescue (Cospas-Sarsat System), which should leverage its expensive resources to save lives as a priority. Besides, ELTs are too big and heavy to be used within small UAVs. Some of the existing solutions for this problem are based on receivers that detect signal strength, which may be a long and tedious process not suitable for user needs. Others do not have enough range or require radio license and expensive amateur radio receivers. This paper presents an emergency radio beacon specifically designed to locate small UAVs. It is triggered automatically in the event of a crash and allows finding and recovering a crashed UAV in a fast and simple way. It meets not only the required specifications of user-friendliness, size and weight of this kind of application, but also it is a high precision and low cost device. Besides, it has enough range and endurance. The experiments carried out show the operation of the proposed system

Deep Room Recognition Using Inaudible Echos

Recent years have seen the increasing need of location awareness by mobile applications. This paper presents a room-level indoor localization approach based on the measured room's echos in response to a two-millisecond single-tone inaudible chirp emitted by a smartphone's loudspeaker. Different from other acoustics-based room recognition systems that record full-spectrum audio for up to ten seconds, our approach records audio in a narrow inaudible band for 0.1 seconds only to preserve the user's privacy. However, the short-time and narrowband audio signal carries limited information about the room's characteristics, presenting challenges to accurate room recognition. This paper applies deep learning to effectively capture the subtle fingerprints in the rooms' acoustic responses. Our extensive experiments show that a two-layer convolutional neural network fed with the spectrogram of the inaudible echos achieve the best performance, compared with alternative designs using other raw data formats and deep models. Based on this result, we design a RoomRecognize cloud service and its mobile client library that enable the mobile application developers to readily implement the room recognition functionality without resorting to any existing infrastructures and add-on hardware. Extensive evaluation shows that RoomRecognize achieves 99.7%, 97.7%, 99%, and 89% accuracy in differentiating 22 and 50 residential/office rooms, 19 spots in a quiet museum, and 15 spots in a crowded museum, respectively. Compared with the state-of-the-art approaches based on support vector machine, RoomRecognize significantly improves the Pareto frontier of recognition accuracy versus robustness against interfering sounds (e.g., ambient music).Comment: 29 page

Routing Unmanned Vehicles in GPS-Denied Environments

Most of the routing algorithms for unmanned vehicles, that arise in data gathering and monitoring applications in the literature, rely on the Global Positioning System (GPS) information for localization. However, disruption of GPS signals either intentionally or unintentionally could potentially render these algorithms not applicable. In this article, we present a novel method to address this difficulty by combining methods from cooperative localization and routing. In particular, the article formulates a fundamental combinatorial optimization problem to plan routes for an unmanned vehicle in a GPS-restricted environment while enabling localization for the vehicle. We also develop algorithms to compute optimal paths for the vehicle using the proposed formulation. Extensive simulation results are also presented to corroborate the effectiveness and performance of the proposed formulation and algorithms.Comment: Publised in International Conference on Umanned Aerial System

LocaRDS: A Localization Reference Data Set

The use of wireless signals for the purposes of localization enables a host of applications relating to the determination and verification of the positions of network participants ranging from radar to satellite navigation. Consequently, this has been a longstanding interest of theoretical and practical research in mobile networks and many solutions have been proposed in the scientific literature. However, it is hard to assess the performance of these in the real world and, more importantly, to compare their advantages and disadvantages in a controlled scientific manner. With this work, we attempt to improve the current state of art methodology in localization research and to place it on a solid scientific grounding for future investigations. Concretely, we developed LocaRDS, an open reference data set of real-world crowdsourced flight data featuring more than 222 million measurements from over 50 million transmissions recorded by 323 sensors. We demonstrate how we can verify the quality of LocaRDS measurements so that it can be used to test, analyze and directly compare different localization methods. Finally, we provide an example implementation for the aircraft localization problem and a discussion of possible metrics for use with LocaRDS