1,429 research outputs found
Indoor Localization of the Points of Interest using RO-SLAM
This paper describes an indoor localization system based on RO-SLAM technique, which has been led to
experimentation. The proposed system has been considered to have low power consumption. The nodes of the
network are based on the well-known architecture TelosB. A distance estimation study has been developed in
order to determine the relationship between radio power signal strength in a radio link and distance between
nodes. This relationship has a high variability and given its importance for successful tracking, much of this
work has been devoted to its study. This system could be applied as a usefull solution for localization in a
warehouse, where GPS-based system does not work. Based on the results obtained, this system is deemed as
feasible because the motes have been localized with an acceptable error (1.2 m) under real conditions
Increasing the Efficiency of 6-DoF Visual Localization Using Multi-Modal Sensory Data
Localization is a key requirement for mobile robot autonomy and human-robot
interaction. Vision-based localization is accurate and flexible, however, it
incurs a high computational burden which limits its application on many
resource-constrained platforms. In this paper, we address the problem of
performing real-time localization in large-scale 3D point cloud maps of
ever-growing size. While most systems using multi-modal information reduce
localization time by employing side-channel information in a coarse manner (eg.
WiFi for a rough prior position estimate), we propose to inter-weave the map
with rich sensory data. This multi-modal approach achieves two key goals
simultaneously. First, it enables us to harness additional sensory data to
localise against a map covering a vast area in real-time; and secondly, it also
allows us to roughly localise devices which are not equipped with a camera. The
key to our approach is a localization policy based on a sequential Monte Carlo
estimator. The localiser uses this policy to attempt point-matching only in
nodes where it is likely to succeed, significantly increasing the efficiency of
the localization process. The proposed multi-modal localization system is
evaluated extensively in a large museum building. The results show that our
multi-modal approach not only increases the localization accuracy but
significantly reduces computational time.Comment: Presented at IEEE-RAS International Conference on Humanoid Robots
(Humanoids) 201
Modeling and interpolation of the ambient magnetic field by Gaussian processes
Anomalies in the ambient magnetic field can be used as features in indoor
positioning and navigation. By using Maxwell's equations, we derive and present
a Bayesian non-parametric probabilistic modeling approach for interpolation and
extrapolation of the magnetic field. We model the magnetic field components
jointly by imposing a Gaussian process (GP) prior on the latent scalar
potential of the magnetic field. By rewriting the GP model in terms of a
Hilbert space representation, we circumvent the computational pitfalls
associated with GP modeling and provide a computationally efficient and
physically justified modeling tool for the ambient magnetic field. The model
allows for sequential updating of the estimate and time-dependent changes in
the magnetic field. The model is shown to work well in practice in different
applications: we demonstrate mapping of the magnetic field both with an
inexpensive Raspberry Pi powered robot and on foot using a standard smartphone.Comment: 17 pages, 12 figures, to appear in IEEE Transactions on Robotic
A comparative evaluation of interest point detectors and local descriptors for visual SLAM
Abstract In this paper we compare the behavior of different interest points detectors and descriptors under the
conditions needed to be used as landmarks in vision-based simultaneous localization and mapping (SLAM).
We evaluate the repeatability of the detectors, as well as the invariance and distinctiveness of the descriptors,
under different perceptual conditions using sequences of images representing planar objects as well as 3D scenes.
We believe that this information will be useful when selecting an appropriat
Keyframe-based monocular SLAM: design, survey, and future directions
Extensive research in the field of monocular SLAM for the past fifteen years
has yielded workable systems that found their way into various applications in
robotics and augmented reality. Although filter-based monocular SLAM systems
were common at some time, the more efficient keyframe-based solutions are
becoming the de facto methodology for building a monocular SLAM system. The
objective of this paper is threefold: first, the paper serves as a guideline
for people seeking to design their own monocular SLAM according to specific
environmental constraints. Second, it presents a survey that covers the various
keyframe-based monocular SLAM systems in the literature, detailing the
components of their implementation, and critically assessing the specific
strategies made in each proposed solution. Third, the paper provides insight
into the direction of future research in this field, to address the major
limitations still facing monocular SLAM; namely, in the issues of illumination
changes, initialization, highly dynamic motion, poorly textured scenes,
repetitive textures, map maintenance, and failure recovery
Conceptual spatial representations for indoor mobile robots
We present an approach for creating conceptual representations of human-made indoor environments using mobile
robots. The concepts refer to spatial and functional properties of typical indoor environments. Following findings
in cognitive psychology, our model is composed of layers representing maps at different levels of abstraction. The
complete system is integrated in a mobile robot endowed with laser and vision sensors for place and object recognition.
The system also incorporates a linguistic framework that actively supports the map acquisition process, and which
is used for situated dialogue. Finally, we discuss the capabilities of the integrated system
Visual 3-D SLAM from UAVs
The aim of the paper is to present, test and discuss the implementation of Visual SLAM techniques to images taken from Unmanned Aerial Vehicles (UAVs) outdoors, in partially structured environments. Every issue of the whole process is discussed in order to obtain more accurate localization and mapping from UAVs flights. Firstly, the issues related to the visual features of objects in the scene, their distance to the UAV, and the related image acquisition system and their calibration are evaluated for improving the whole process. Other important, considered issues are related to the image processing techniques, such as interest point detection, the matching procedure and the scaling factor. The whole system has been tested using the COLIBRI mini UAV in partially structured environments. The results that have been obtained for localization, tested against the GPS information of the flights, show that Visual SLAM delivers reliable localization and mapping that makes it suitable for some outdoors applications when flying UAVs
- …