Higher Order Sliding Mode Control of MIMO Induction Motors: A New Adaptive Approach

In this paper the objective is to force the outputs of nonlinear nonaffine multi-input multi-output (MIMO) systems to track those of a linear system with the desired properties. The approach is based on designing higher order sliding mode controller (HOSMC) with the definition of a new proportional-integral (PI) sliding surface. To this end, a linear state feedback with an adaptive switching gain (ASG) is applied to the nonlinear MIMO systems. Therefore, the switching gain can increase or decrease based on the system conditions. Then, the chattering is completely removed using a combination of HOSMC and ASG. Moreover, the proposed procedure is independent from the upper bound of the matched uncertainty, which is in the direction of system inputs. The finite time convergence to the sliding surface is also proved, which provides an invariance property in finite time. Note that invariance is the most important property of SMC. Finally, the general model of MIMO induction motors (IM) is used to address and to verify the proposed controller.The authors wish to express their gratitude to the Basque Government, through the project EKOHEGAZ II (ELKARTEK KK-2023/00051), to the Diputación Foral de Álava (DFA), through the project CONAVANTER, to the UPV/EHU, through the project GIU20/063, and to the MobilityLab Foundation (CONV23/14. Proy. 16) for supporting this work

Design of Adaptive Sliding Mode Fuzzy Control for Robot Manipulator Based on Extended Kalman Filter

In this work, a new adaptive motion control scheme for robust performance control of robot manipulators is presented. The proposed scheme is designed by combining the fuzzy logic control with the sliding mode control based on extended Kalman filter. Fuzzy logic controllers have been used successfully in many applications and were shown to be superior to the classical controllers for some nonlinear systems. Sliding mode control is a powerful approach for controlling nonlinear and uncertain systems. It is a robust control method and can be applied in the presence of model uncertainties and parameter disturbances, provided that the bounds of these uncertainties and disturbances are known. We have designed a new adaptive Sliding Mode Fuzzy Control (SMFC) method that requires only position measurements. These measurements and the input torques are used in an extended Kalman filter (EKF) to estimate the inertial parameters of the full nonlinear robot model as well as the joint positions and velocities. These estimates are used by the SMFC to generate the input torques. The combination of the EKF and the SMFC is shown to result in a stable adaptive control scheme called trajectory-tracking adaptive robot with extended Kalman (TAREK) method. The theory behind TAREK method provides clear guidelines on the selection of the design parameters for the controller. The proposed controller is applied to a two-link robot manipulator. Computer simulations show the robust performance of the proposed scheme

Variable structure control with chattering reduction of a generalized T-S model

In this paper, a fuzzy logic controller (FLC) based variable structure control (VSC) is presented. The main objective is to obtain an improved performance of highly non-linear unstable systems. New functions for chattering reduction and error convergence without sacrificing invariant properties are proposed. The main feature of the proposed method is that the switching function is added as an additional fuzzy variable and will be introduced in the premise part of the fuzzy rules; together with the state variables. In this work, a tuning of the well known weighting parameters approach is proposed to optimize local and global approximation and modelling capability of the Takagi-Sugeno (T-S) fuzzy model to improve the choice of the performance index and minimize it. The main problem encountered is that the T-S identification method can not be applied when the membership functions are overlapped by pairs. This in turn restricts the application of the T-S method because this type of membership function has been widely used in control applications. The approach developed here can be considered as a generalized version of the T-S method. An inverted pendulum mounted on a cart is chosen to evaluate the robustness, effectiveness, accuracy and remarkable performance of the proposed estimation approach in comparison with the original T-S model. Simulation results indicate the potential, simplicity and generality of the estimation method and the robustness of the chattering reduction algorithm. In this paper, we prove that the proposed estimation algorithm converge the very fast, thereby making it very practical to use. The application of the proposed FLC-VSC shows that both alleviation of chattering and robust performance are achieved

Sliding Mode Control

The main objective of this monograph is to present a broad range of well worked out, recent application studies as well as theoretical contributions in the field of sliding mode control system analysis and design. The contributions presented here include new theoretical developments as well as successful applications of variable structure controllers primarily in the field of power electronics, electric drives and motion steering systems. They enrich the current state of the art, and motivate and encourage new ideas and solutions in the sliding mode control area

Development of Dynamic Models for a Reactive PackedDistillation Column

This work has been carried out to develop dynamic models for a reactive packed distillation column using the production of ethyl acetate as the case study. The experimental setup for the production of ethyl acetate was a pilot scale packed column divided into condenser, rectification, acetic acid feed, reaction, ethanol feed, stripping and reboiler sections. The reaction section was filled with Amberlyst 15 catalyst while the rectification and the stripping sections were both filled raschig rings. The theoretical models for each of the sections of the column were developed from first principles and solved with the aid of MATLAB R2011a. Comparisons were made between the experimental and theoretical results by calculating the percentage residuals for the top and bottom segment temperatures of the column. The results obtained showed that there were good agreements between the experimental and theoretical top and bottom segment temperatures because the calculated percentage residuals were small. Therefore, the developed dynamic models can be used to represent the reactive packed distillation column

Control Theory in Engineering

The subject matter of this book ranges from new control design methods to control theory applications in electrical and mechanical engineering and computers. The book covers certain aspects of control theory, including new methodologies, techniques, and applications. It promotes control theory in practical applications of these engineering domains and shows the way to disseminate researchers’ contributions in the field. This project presents applications that improve the properties and performance of control systems in analysis and design using a higher technical level of scientific attainment. The authors have included worked examples and case studies resulting from their research in the field. Readers will benefit from new solutions and answers to questions related to the emerging realm of control theory in engineering applications and its implementation

Induction Motors

AC motors play a major role in modern industrial applications. Squirrel-cage induction motors (SCIMs) are probably the most frequently used when compared to other AC motors because of their low cost, ruggedness, and low maintenance. The material presented in this book is organized into four sections, covering the applications and structural properties of induction motors (IMs), fault detection and diagnostics, control strategies, and the more recently developed topology based on the multiphase (more than three phases) induction motors. This material should be of specific interest to engineers and researchers who are engaged in the modeling, design, and implementation of control algorithms applied to induction motors and, more generally, to readers broadly interested in nonlinear control, health condition monitoring, and fault diagnosis

Design and control of a synchronous reluctance machine drive

This thesis investigates the design, performance and control of a synchronous reluctance machine (Synchrel) drive. The Synchrel machine is proposed for variable speed drives because of its advantages over other machines. The rotor has no cage winding, brushes or slip rings. The torque ripple levels are lower in the Synchrel machine than the switched reluctance machine as it operates from a standard sine wave supply. An axially laminated rotor was designed based on finite element analysis, with the aim of producing the same output power as obtained from an induction motor (M) with a similar stator. Using vector control, the developed torque is controlled by regulating the stator current vector. Two vector control schemes are used, maximum torque per ampere and constant current in the direct axis. The output torque characteristics of the machine have been confirmed by finite element analysis. Slotine's approach of sliding mode control is used for position control of the vector controlled synchronous reluctance machine. A comparison is undertaken between the performance of a fixed gain controller with two sliding mode controllers, for both the regulator and servo cases. Invariant performance is obtained using Slotine's sliding mode control approach, unlike with a fixed gain controller. Robustness to parameter variation is an important feature of this technique. This robustness can be achieved through the control law design, assuming parameter variation bounds are known. These improvements are demonstrated for variations in load inertia. Inductance ripple affects machine performance, for example decreasing output torque and increasing core losses. A state space model for the machine that incorporates this inductance effect, yields drive simulation results that agree with experimental results

Systems Structure and Control

The title of the book System, Structure and Control encompasses broad field of theory and applications of many different control approaches applied on different classes of dynamic systems. Output and state feedback control include among others robust control, optimal control or intelligent control methods such as fuzzy or neural network approach, dynamic systems are e.g. linear or nonlinear with or without time delay, fixed or uncertain, onedimensional or multidimensional. The applications cover all branches of human activities including any kind of industry, economics, biology, social sciences etc