A low-power cache system for high-performance processors

制度:新 ; 報告番号:甲3439号 ; 学位の種類:博士(工学) ; 授与年月日:12-Sep-11 ; 早大学位記番号:新576

Dynamic data shapers optimize performance in Dynamic Binary Optimization (DBO) environment

Processor hardware has been architected with the assumption that most data access patterns would be linearly spatial in nature. But, most applications involve algorithms that are designed with optimal efficiency in mind, which results in non-spatial, multi-dimensional data access. Moreover, this data view or access pattern changes dynamically in different program phases. This results in a mismatch between the processor hardware\u27s view of data and the algorithmic view of data, leading to significant memory access bottlenecks. This variation in data views is especially more pronounced in applications involving large datasets, leading to significantly increased latency and user response times. Previous attempts to tackle this problem were primarily targeted at execution time optimization. We present a dynamic technique piggybacked on the classical dynamic binary optimization (DBO) to shape the data view for each program phase differently resulting in program execution time reduction along with reductions in access energy. Our implementation rearranges non-adjacent data into a contiguous dataview. It uses wrappers to replace irregular data access patterns with spatially local dataview. HDTrans, a runtime dynamic binary optimization framework has been used to perform runtime instrumentation and dynamic data optimization to achieve this goal. This scheme not only ensures a reduced program execution time, but also results in lower energy use. Some of the commonly used benchmarks from the SPEC 2006 suite were profiled to determine irregular data accesses from procedures which contributed heavily to the overall execution time. Wrappers built to replace these accesses with spatially adjacent data led to a significant improvement in the total execution time. On average, 20% reduction in time was achieved along with a 5% reduction in energy

Top Quark Physics at the LHC: A Review of the First Two Years

This review summarizes the highlights in the area of top quark physics obtained with the two general purpose detectors ATLAS and CMS during the first two years of operation of the Large Hadron Collider LHC. It covers the 2010 and 2011 data taking periods, where the LHC provided pp collisions at a center-of-mass energy of sqrt(s)=7 TeV. Measurements are presented of the total and differential top quark pair production cross section in many different channels, the top quark mass and various other properties of the top quark and its interactions, for instance the charge asymmetry. Measurements of single top quark production and various searches for new physics involving top quarks are also discussed. The already very precise experimental data are in good agreement with the standard model.Comment: 107 pages, invited review for Int. J. Mod. Phys. A, v2 is identical to v1 except for the addition of the table of content

レイテンシ耐性を持つベクトルプロセッサアーキテクチャに関する研究

Tohoku University博士（情報科学）thesi

Hardware acceleration for power efficient deep packet inspection

The rapid growth of the Internet leads to a massive spread of malicious attacks like viruses and malwares, making the safety of online activity a major concern. The use of Network Intrusion Detection Systems (NIDS) is an effective method to safeguard the Internet. One key procedure in NIDS is Deep Packet Inspection (DPI). DPI can examine the contents of a packet and take actions on the packets based on predefined rules. In this thesis, DPI is mainly discussed in the context of security applications. However, DPI can also be used for bandwidth management and network surveillance. DPI inspects the whole packet payload, and due to this and the complexity of the inspection rules, DPI algorithms consume significant amounts of resources including time, memory and energy. The aim of this thesis is to design hardware accelerated methods for memory and energy efficient high-speed DPI. The patterns in packet payloads, especially complex patterns, can be efficiently represented by regular expressions, which can be translated by the use of Deterministic Finite Automata (DFA). DFA algorithms are fast but consume very large amounts of memory with certain kinds of regular expressions. In this thesis, memory efficient algorithms are proposed based on the transition compressions of the DFAs. In this work, Bloom filters are used to implement DPI on an FPGA for hardware acceleration with the design of a parallel architecture. Furthermore, devoted at a balance of power and performance, an energy efficient adaptive Bloom filter is designed with the capability of adjusting the number of active hash functions according to current workload. In addition, a method is given for implementation on both two-stage and multi-stage platforms. Nevertheless, false positive rates still prevents the Bloom filter from extensive utilization; a cache-based counting Bloom filter is presented in this work to get rid of the false positives for fast and precise matching. Finally, in future work, in order to estimate the effect of power savings, models will be built for routers and DPI, which will also analyze the latency impact of dynamic frequency adaption to current traffic. Besides, a low power DPI system will be designed with a single or multiple DPI engines. Results and evaluation of the low power DPI model and system will be produced in future

Scalable Emulation of Heterogeneous Systems

The breakdown of Dennard's transistor scaling has driven computing systems toward application-specific accelerators, which can provide orders-of-magnitude improvements in performance and energy efficiency over general-purpose processors. To enable the radical departures from conventional approaches that heterogeneous systems entail, research infrastructure must be able to model processors, memory and accelerators, as well as system-level changes---such as operating system or instruction set architecture (ISA) innovations---that might be needed to realize the accelerators' potential. Unfortunately, existing simulation tools that can support such system-level research are limited by the lack of fast, scalable machine emulators to drive execution. To fill this need, in this dissertation we first present a novel machine emulator design based on dynamic binary translation that makes the following improvements over the state of the art: it scales on multicore hosts while remaining memory efficient, correctly handles cross-ISA differences in atomic instruction semantics, leverages the host floating point (FP) unit to speed up FP emulation without sacrificing correctness, and can be efficiently instrumented to---among other possible uses---drive the execution of a full-system, cross-ISA simulator with support for accelerators. We then demonstrate the utility of machine emulation for studying heterogeneous systems by leveraging it to make two additional contributions. First, we quantify the trade-offs in different coupling models for on-chip accelerators. Second, we present a technique to reuse the private memories of on-chip accelerators when they are otherwise inactive to expand the system's last-level cache, thereby reducing the opportunity cost of the accelerators' integration

Microarchitectural Techniques to Exploit Repetitive Computations and Values

La dependencia de datos es una de las principales razones que limitan el rendimiento de los procesadores actuales. Algunos estudios han demostrado, que las aplicaciones no pueden alcanzar más de una decena de instrucciones por ciclo en un procesador ideal, con la simple limitación de las dependencias de datos. Esto sugiere que, desarrollar técnicas que eviten la serialización causada por ellas, son importantes para acelerar el paralelismo a nivel de instrucción y será crucial en los microprocesadores del futuro.Además, la innovación y las mejoras tecnológicas en el diseño de los procesadores de los últimos diez años han sobrepasado los avances en el diseño del sistema de memoria. Por lo tanto, la cada vez mas grande diferencia de velocidades de procesador y memoria, ha motivado que, los actuales procesadores de alto rendimiento se centren en las organizaciones cache para tolerar las altas latencias de memoria. Las memorias cache solventan en parte esta diferencia de velocidades, pero a cambio introducen un aumento de área del procesador, un incremento del consumo energético y una mayor demanda de ancho de banda de memoria, de manera que pueden llegar a limitar el rendimiento del procesador.En esta tesis se proponen diversas técnicas microarquitectónicas que pueden aplicarse en diversas partes del procesador, tanto para mejorar el sistema de memoria, como para acelerar la ejecución de instrucciones. Algunas de ellas intentan suavizar la diferencia de velocidades entre el procesador y el sistema de memoria, mientras que otras intentan aliviar la serialización causada por las dependencias de datos. La idea fundamental, tras todas las técnicas propuestas, consiste en aprovechar el alto porcentaje de repetición de los programas convencionales.Las instrucciones ejecutadas por los programas de hoy en día, tienden a ser repetitivas, en el sentido que, muchos de los datos consumidos y producidos por ellas son frecuentemente los mismos. Esta tesis denomina la repetición de cualquier valor fuente y destino como Repetición de Valores, mientras que la repetición de valores fuente y operación de la instrucción se distingue como Repetición de Computaciones. De manera particular, las técnicas propuestas para mejorar el sistema de memoria se basan en explotar la repetición de valores producida por las instrucciones de almacenamiento, mientras que las técnicas propuestas para acelerar la ejecución de instrucciones, aprovechan la repetición de computaciones producida por todas las instrucciones.Data dependences are some of the most important hurdles that limit the performance of current microprocessors. Some studies have shown that some applications cannot achieve more than a few tens of instructions per cycle in an ideal processor with the sole limitation of data dependences. This suggests that techniques for avoiding the serialization caused by them are important for boosting the instruction-level parallelism and will be crucial for future microprocessors. Moreover, innovation and technological improvements in processor design have outpaced advances in memory design in the last ten years. Therefore, the increasing gap between processor and memory speeds has motivated that current high performance processors focus on cache memory organizations to tolerate growing memory latencies. Caches attempt to bridge this gap but do so at the expense of large amounts of die area, increment of the energy consumption and higher demand of memory bandwidth that can be progressively a greater limit to high performance.We propose several microarchitectural techniques that can be applied to various parts of current microprocessor designs to improve the memory system and to boost the execution of instructions. Some techniques attempt to ease the gap between processor and memory speeds, while the others attempt to alleviate the serialization caused by data dependences. The underlying aim behind all the proposed microarchitectural techniques is to exploit the repetitive behaviour in conventional programs. Instructions executed by real-world programs tend to be repetitious, in the sense that most of the data consumed and produced by several dynamic instructions are often the same. We refer to the repetition of any source or result value as Value Repetition and the repetition of source values and operation as Computation Repetition. In particular, the techniques proposed for improving the memory system are based on exploiting the value repetition produced by store instructions, while the techniques proposed for boosting the execution of instructions are based on exploiting the computation repetition produced by all the instructions