60 research outputs found

    Multiple-Resampling Receiver Design for OFDM Over Doppler-Distorted Underwater Acoustic Channels

    Get PDF
    Cataloged from PDF version of article.In this paper, we focus on orthogonal frequency-divisionmultiplexing (OFDM) receiver designs for underwater acoustic (UWA) channels with user- and/or path-specific Doppler scaling distortions. The scenario is motivated by the cooperative communications framework, where distributed transmitter/receiver pairs may experience significantly different Doppler distortions, as well as by the single-user scenarios, where distinct Doppler scaling factors may exist among different propagation paths. The conventional approach of front–end resampling that corrects for common Doppler scalingmay not be appropriatein such scenarios, rendering a post-fast-Fourier-transform (FFT) signal that is contaminated by user- and/or path-specific intercarrier interference. To counteract this problem, we propose a family of front–end receiver structures thatutilizemultiple-resampling (MR)branches,eachmatched to the Doppler scaling factor of a particular user and/or path. Following resampling, FFT modules transform the Doppler-compensated signals into the frequency domain for further processing through linear or nonlinear detection schemes. As part of the overall receiver structure, a gradient–descent approachis also proposed to refine the channel estimates obtained by standard sparse channel estimators. The effectiveness and robustness of the proposed receivers are demonstrated via simulations, as well as emulations based on real data collected during the 2010 Mobile Acoustic Communications Experiment (MACE10, Martha’s Vineyard, MA) and the 2008 Kauai Acomms MURI (KAM08, Kauai, HI) experiment

    Adaptive Modulation Schemes for Underwater Acoustic OFDM Communication

    Get PDF
    High data rate communication is challenging in underwater acoustic (UA) communication as UA channels vary fast along with the environmental factors. A real-time Orthogonal frequency-division multiplexing (OFDM) based adaptive UA communication system is studied in this research employing the National Instruments (NI) LabVIEW software and NI CompactDAQ device. The developed adaptive modulation schemes enhance the reliability of communication, guarantee continuous connectivity, ensure maximum performance under a fixed BER at all times and boost data rate

    Doctor of Philosophy

    Get PDF
    dissertationThe use of multicarrier techniques has allowed the rapid expansion of broadband wireless communications. Orthogonal frequency division multiplexing (OFDM) has been the most dominant technology in the past decade. It has been deployed in both indoor Wi-Fi and cellular environments, and has been researched for use in underwater acoustic channels. Recent works in wireless communications include the extension of OFDM to multiple access applications. Multiple access OFDM, or orthogonal frequency division multiple access (OFDMA), has been implemented in the third generation partnership project (3GPP) long- term evolution (LTE) downlink. In order to reduce the intercarrier interference (ICI) when user's synchronization is relaxed, filterbank multicarrier communication (FBMC) systems have been proposed. The first contribution made in this dissertation is a novel study of the classical FBMC systems that were presented in 1960s. We note that two distinct methods were presented then. We show that these methods are closely related through a modulation and a time/frequency scaling step. For cellular channels, OFDM also has the weakness of relatively large peak-to-average power ratios (PAPR). A special form of OFDM for the uplink of multiple access networks, called single carrier frequency division multiple access (SC-FDMA), has been developed to mitigate this issue. In this regard, this dissertation makes two contributions. First, we develop an optimization method for designing an effective precoding method for SC-FDMA systems. Second, we show how an equivalent to SC-FDMA can be developed for systems that are based on FBMC. In underwater acoustic communications applications, researchers are investigating the use of multicarrier communication systems like OFDM in underwater channels. The movement of the communicating vehicles scales the received signal along the time axis, which is often referred to as Doppler scaling. To undo the signal degradation, researchers have investigated methods to estimate the Doppler scaling factor and restore the original signal using resampling. We investigate a method called nonuniform fast Fourier transform (NUFFT) and apply that to increase the precision in the detection and correction of the Doppler scaling factor. NUFFT is applied to both OFDM and FBMC and its performance over the experimental data obtained from at sea experiments is investigated

    PERFORMANCE EVALUATION OF A MULTICARRIER MIMO SYSTEM BASED ON DFT-PRECODING AND SUBCARRIER MAPPING

    Get PDF
    The ever-increasing end user demands are instigating the development of innovative methods targeting not only data rate enhancement but additionally better service quality in each subsequent wireless communication standard. This quest to achieve higher data rates has compelled the next generation communication technologies to use multicarrier systems e.g. orthogonal frequency division multiplexing (OFDM), while also relying on the multiple-input multiple-output (MIMO) technology. This paper is focused on implementing a MIMO-OFDM system and on using various techniques to optimize it in terms of the bit-error rate performance. The test case considered is a system implementation constituting the enabling technologies for 4G and beyond communication systems. The bit-error rate optimizations considered are based on preceding the OFDM modulation step by Discrete Fourier Transform (DFT) while also considering various subcarrier mapping schemes. MATLAB-based simulation of a 2 × 2 MIMO-OFDM system exhibits a maximum of 2 to 5 orders of magnitude reduction in bit-error rate due to DFT-precoding and subcarrier mapping respectively at high signal-to-noise ratio values in various environments. A 2-3dBs reduction in peak-to-average power ratio due to DFT-precoding in different environments is also exhibited in the various simulations

    Index Modulation-Aided OFDM for Visible Light Communications

    Get PDF
    Index modulation-aided orthogonal frequency-division multiplexing(IM-OFDM) is a promising modulation technique to achieve high spectral and energy efficiency. In this chapter, the conventional optical OFDM schemes are firstly reviewed, followed by the principles of IM-OFDM. The application of IM-OFDM in visible light communication (VLC) systems is introduced, and its performance is compared with conventional optical OFDM, which verifies its superiority. Finally, the challenges and opportunities of IM-OFDM are discussed for the VLC applications

    Multiple-resampling receiver design for OFDM over doppler-distorted underwater acoustic channels

    Get PDF
    In this paper, we focus on orthogonal frequency-division multiplexing (OFDM) receiver designs for underwater acoustic (UWA) channels with user-and/or path-specific Doppler scaling distortions. The scenario is motivated by the cooperative communications framework, where distributed transmitter/receiver pairs may experience significantly different Doppler distortions, as well as by the single-user scenarios, where distinct Doppler scaling factors may exist among different propagation paths. The conventional approach of front-end resampling that corrects for common Doppler scaling may not be appropriate in such scenarios, rendering a post-fast-Fourier-transform (FFT) signal that is contaminated by user-and/or path-specific intercarrier interference. To counteract this problem, we propose a family of front-end receiver structures that utilize multiple-resampling (MR) branches, each matched to the Doppler scaling factor of a particular user and/or path. Following resampling, FFT modules transform the Doppler-compensated signals into the frequency domain for further processing through linear or nonlinear detection schemes. As part of the overall receiver structure, a gradient-descent approach is also proposed to refine the channel estimates obtained by standard sparse channel estimators. The effectiveness and robustness of the proposed receivers are demonstrated via simulations, as well as emulations based on real data collected during the 2010 Mobile Acoustic Communications Experiment (MACE10, Martha's Vineyard, MA) and the 2008 Kauai Acomms MURI (KAM08, Kauai, HI) experiment. © 1976-2012 IEEE
    corecore