An Assessment of PIER Electric Grid Research 2003-2014 White Paper

This white paper describes the circumstances in California around the turn of the 21st century that led the California Energy Commission (CEC) to direct additional Public Interest Energy Research funds to address critical electric grid issues, especially those arising from integrating high penetrations of variable renewable generation with the electric grid. It contains an assessment of the beneficial science and technology advances of the resultant portfolio of electric grid research projects administered under the direction of the CEC by a competitively selected contractor, the University of California’s California Institute for Energy and the Environment, from 2003-2014

Application of a Novel Stability Control System for Coordination of Power Flow Control Devices in the Future GB Transmission System

With increasing large-scale renewable energy sources in the UK and the need for adequate transmission capacity to accommodate the upcoming renewable generations, more state-of-the-art power flow control devices such as embedded High Voltage DC (HVDC) links will soon be commissioned in the GB HV transmission system to provide the additional capacity. An operational stability control system is required to ensure the coordinated control of power flow control devices in order to achieve better dynamic performance and stability. The focus of this paper is to demonstrate the capability of a multi-variable controller for the coordinated control using a non-parametric sampled regulator control design method. This method is practical for applications in large power systems since the complexity of the controller design does not increase with the size and dynamic of the power system. Also, this design method is demonstrated in two power system applications in this paper

Power system security enhancement by HVDC links using a closed-loop emergency control

In recent years, guaranteeing that large-scale interconnected systems operate safely, stably and economically has become a major and emergency issue. A number of high profile blackouts caused by cascading outages have focused attention on this issue. Embedded HVDC (High Voltage Direct Current) links within a larger AC power system are known to act as a “firewall” against cascading disturbances and therefore, can effectively contribute in preventing blackouts. A good example is the 2003 blackout in USA and Canada, where the Québec grid was not affected due to its HVDC interconnection. In the literature, many works have studied the impact of HVDC on the power system stability, but very few examples exist in the area of its impact on the system security. This paper presents a control strategy for HVDC systems to increase their contribution to system security. A real-time closed-loop control scheme is used to modulate the DC power of HVDC links to alleviate AC system overloads and improve system security. Simulations carried out on a simplified model of the Hydro-Québec network show that the proposed method works well and can greatly improve system security during emergency situations.Peer reviewedFinal Accepted Versio

Supporting transient stability in future highly distributed power systems

Incorporating a substantial volume of microgeneration (consumer-led rather than centrally planed) within a system that is not designed for such a paradigm could lead to conflicts in the operating strategies of the new and existing centralised generation technologies. So it becomes vital for such substantial amounts of microgeneration among other decentralised resources to be controlled in the way that the aggregated response will support the wider system. In addition, the characteristic behaviour of such populations requires to be understood under different system conditions to ascertain measures of risk and resilience. Therefore, this paper provides two main contributions: firstly, conceptual control for a system incorporating a high penetration of microgeneration and dynamic load, termed a Highly Distributed Power System (HDPS), is proposed. Secondly, a technical solution that can support enhanced transient stability in such a system is evaluated and demonstrated

Optimization of Battery Energy Storage to Improve Power System Oscillation Damping

A placement problem for multiple Battery Energy Storage System (BESS) units is formulated towards power system transient voltage stability enhancement in this paper. The problem is solved by the Cross-Entropy (CE) optimization method. A simulation-based approach is adopted to incorporate higher-order dynamics and nonlinearities of generators and loads. The objective is to maximize the voltage stability index, which is setup based on certain grid-codes. Formulations of the optimization problem are then discussed. Finally, the proposed approach is implemented in MATLAB/DIgSILENT and tested on the New England 39-Bus system. Results indicate that installing BESS units at the optimized location can alleviate transient voltage instability issue compared with the original system with no BESS. The CE placement algorithm is also compared with the classic PSO (Particle Swarm Optimization) method, and its superiority is demonstrated in terms of a faster convergence rate with matched solution qualities.Comment: This paper has been accepted by IEEE Transactions on Sustainable Energy and now still in online-publication phase, IEEE Transactions on Sustainable Energy. 201

Power quality and electromagnetic compatibility: special report, session 2

The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems. Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages). The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks: Block 1: Electric and Magnetic Fields, EMC, Earthing systems Block 2: Harmonics Block 3: Voltage Variation Block 4: Power Quality Monitoring Two Round Tables will be organised: - Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13) - Reliability Benchmarking - why we should do it? What should be done in future? (RT 15

Inertia emulation control of VSC-HVDC transmission system

The increasing penetration of power electronics interfaced renewable generation (e.g. offshore wind) has been leading to a reduction in conventional synchronous-machine based generation. Most converter-interfaced energy sources do not contribute to the overall power system inertia; and therefore cannot support the system during system transients and disturbances. It is therefore desirable that voltage-source-converter (VSC) based high voltage direct current (HVDC) interfaces, which play an important role in delivery of renewable power to AC systems, could contribute a virtual inertia and provide AC grid frequency support. In this paper, an inertia emulation control (IEC) system is proposed that allows VSC-HVDC system to perform an inertial response in a similar fashion to synchronous machines (SM), by exercising the electro-static energy stored in DC shunt capacitors of the HVDC system. The proposed IEC scheme has been implemented in simulations and its performance is evaluated using Matlab/Simulink

NETMAT: A knowledge-based grid system analysis tool

The increasing expansion of electric power systems renders the power system operator's task increasingly complex. The integration into energy management systems of further analytical algorithms implies that more data has to be analysed by the control engineer. For these reasons and many others, more sophisticated tools are required by power engineers to ease the pressure under which they perform their task. The advent of knowledge-based systems has led to a new approach to the problem. The combination of expert systems and numerical algorithms can be advantageously exploited to assist the power system engineer in operating the system. This paper presents the development of a knowledge-based tool for grid system analysis. The tool, NETMAT (NETwork Modelling AssistanT) , is to be used to analyse the impact of grid system maintenance and modification procedures and of new generating plants on power utilities, and in particular on their ability to generate and sell electricity. NE TMAT consists of a number of numerical applications interfaced to an expert system shell through specific problem domain knowledge bases. Results are presented based on the use of the IEEE-30 busbar network as a test network