Latent Class Model with Application to Speaker Diarization

In this paper, we apply a latent class model (LCM) to the task of speaker diarization. LCM is similar to Patrick Kenny's variational Bayes (VB) method in that it uses soft information and avoids premature hard decisions in its iterations. In contrast to the VB method, which is based on a generative model, LCM provides a framework allowing both generative and discriminative models. The discriminative property is realized through the use of i-vector (Ivec), probabilistic linear discriminative analysis (PLDA), and a support vector machine (SVM) in this work. Systems denoted as LCM-Ivec-PLDA, LCM-Ivec-SVM, and LCM-Ivec-Hybrid are introduced. In addition, three further improvements are applied to enhance its performance. 1) Adding neighbor windows to extract more speaker information for each short segment. 2) Using a hidden Markov model to avoid frequent speaker change points. 3) Using an agglomerative hierarchical cluster to do initialization and present hard and soft priors, in order to overcome the problem of initial sensitivity. Experiments on the National Institute of Standards and Technology Rich Transcription 2009 speaker diarization database, under the condition of a single distant microphone, show that the diarization error rate (DER) of the proposed methods has substantial relative improvements compared with mainstream systems. Compared to the VB method, the relative improvements of LCM-Ivec-PLDA, LCM-Ivec-SVM, and LCM-Ivec-Hybrid systems are 23.5%, 27.1%, and 43.0%, respectively. Experiments on our collected database, CALLHOME97, CALLHOME00 and SRE08 short2-summed trial conditions also show that the proposed LCM-Ivec-Hybrid system has the best overall performance

Investigation of Frame Alignments for GMM-based Digit-prompted Speaker Verification

Frame alignments can be computed by different methods in GMM-based speaker verification. By incorporating a phonetic Gaussian mixture model (PGMM), we are able to compare the performance using alignments extracted from the deep neural networks (DNN) and the conventional hidden Markov model (HMM) in digit-prompted speaker verification. Based on the different characteristics of these two alignments, we present a novel content verification method to improve the system security without much computational overhead. Our experiments on the RSR2015 Part-3 digit-prompted task show that, the DNN based alignment performs on par with the HMM alignment. The results also demonstrate the effectiveness of the proposed Kullback-Leibler (KL) divergence based scoring to reject speech with incorrect pass-phrases.Comment: accepted by APSIPA ASC 201

Adaptive speaker diarization of broadcast news based on factor analysis

The introduction of factor analysis techniques in a speaker diarization system enhances its performance by facilitating the use of speaker specific information, by improving the suppression of nuisance factors such as phonetic content, and by facilitating various forms of adaptation. This paper describes a state-of-the-art iVector-based diarization system which employs factor analysis and adaptation on all levels. The diarization modules relevant for this work are: the speaker segmentation which searches for speaker boundaries and the speaker clustering which aims at grouping speech segments of the same speaker. The speaker segmentation relies on speaker factors which are extracted on a frame-by-frame basis using eigenvoices. We incorporate soft voice activity detection in this extraction process as the speaker change detection should be based on speaker information only and we want it to disregard the non-speech frames by applying speech posteriors. Potential speaker boundaries are inserted at positions where rapid changes in speaker factors are witnessed. By employing Mahalanobis distances, the effect of the phonetic content can be further reduced, which results in more accurate speaker boundaries. This iVector-based segmentation significantly outperforms more common segmentation methods based on the Bayesian Information Criterion (BIC) or speech activity marks. The speaker clustering employs two-step Agglomerative Hierarchical Clustering (AHC): after initial BIC clustering, the second cluster stage is realized by either an iVector Probabilistic Linear Discriminant Analysis (PLDA) system or Cosine Distance Scoring (CDS) of extracted speaker factors. The segmentation system is made adaptive on a file-by-file basis by iterating the diarization process using eigenvoice matrices adapted (unsupervised) on the output of the previous iteration. Assuming that for most use cases material similar to the recording in question is readily available, unsupervised domain adaptation of the speaker clustering is possible as well. We obtain this by expanding the eigenvoice matrix used during speaker factor extraction for the CDS clustering stage with a small set of new eigenvoices that, in combination with the initial generic eigenvoices, models the recurring speakers and acoustic conditions more accurately. Experiments on the COST278 multilingual broadcast news database show the generation of significantly more accurate speaker boundaries by using adaptive speaker segmentation which also results in more accurate clustering. The obtained speaker error rate (SER) can be further reduced by another 13% relative to 7.4% via domain adaptation of the CDS clustering. (C) 2017 Elsevier Ltd. All rights reserved

Latent Class Model with Application to Speaker Diarization

In this paper, we apply a latent class model (LCM) to the task of speaker diarization. LCM is similar to Patrick Kenny’s variational Bayes (VB) method in that it uses soft information and avoids premature hard decisions in its iterations. In contrast to the VB method, which is based on a generative model, LCM provides a framework allowing both generative and discriminative models. The discriminative property is realized through the use of i-vector (Ivec), probabilistic linear discriminative analysis (PLDA), and a support vector machine (SVM) in this work. Systems denoted as LCM-Ivec-PLDA, LCM-Ivec-SVM, and LCM-Ivec-Hybrid are introduced. In addition, three further improvements are applied to enhance its performance. (1) Adding neighbor windows to extract more speaker information for each short segment. (2) Using a hidden Markov model to avoid frequent speaker change points. (3) Using an agglomerative hierarchical cluster to do initialization and present hard and soft priors, in order to overcome the problem of initial sensitivity. Experiments on the National Institute of Standards and Technology Rich Transcription 2009 speaker diarization database, under the condition of a single distant microphone, show that the diarization error rate (DER) of the proposed methods has substantial relative improvements compared with mainstream systems. Compared to the VB method, the relative improvements of LCM-Ivec-PLDA, LCM-Ivec-SVM, and LCM-Ivec-Hybrid systems are 23.5%, 27.1%, and 43.0%, respectively. Experiments on our collected database, CALLHOME97, CALLHOME00, and SRE08 short2-summed trial conditions also show that the proposed LCM-Ivec-Hybrid system has the best overall performance

On the Use of Deep Feedforward Neural Networks for Automatic Language Identification

In this work, we present a comprehensive study on the use of deep neural networks (DNNs) for automatic language identification (LID). Motivated by the recent success of using DNNs in acoustic modeling for speech recognition, we adapt DNNs to the problem of identifying the language in a given utterance from its short-term acoustic features. We propose two different DNN- based approaches. In the first one, the DNN acts as an end-to-end LID classifier, receiving as input the speech features and providing as output the estimated probabilities of the target languages. In the second approach, the DNN is used to extract bottleneck features that are then used as inputs for a state-of-the-art i-vector system. Experiments are conducted in two different scenarios: the complete NIST Language Recognition Evaluation dataset 2009 (LRE’09) and a subset of the Voice of America (VOA) data from LRE’09, in which all languages have the same amount of training data. Results for both datasets demonstrate that the DNN-based systems significantly outperform a state-of-art i-vector system when dealing with short-duration utterances. Furthermore, the combination of the DNN-based and the classical i-vector system leads to additional performance improvements (up to 45% of relative improvement in both EER and Cavg on 3s and 10s conditions, respectively)

The I4U Mega Fusion and Collaboration for NIST Speaker Recognition Evaluation 2016

The 2016 speaker recognition evaluation (SRE'16) is the latest edition in the series of benchmarking events conducted by the National Institute of Standards and Technology (NIST). I4U is a joint entry to SRE'16 as the result from the collaboration and active exchange of information among researchers from sixteen Institutes and Universities across 4 continents. The joint submission and several of its 32 sub-systems were among top-performing systems. A lot of efforts have been devoted to two major challenges, namely, unlabeled training data and dataset shift from Switchboard-Mixer to the new Call My Net dataset. This paper summarizes the lessons learned, presents our shared view from the sixteen research groups on recent advances, major paradigm shift, and common tool chain used in speaker recognition as we have witnessed in SRE'16. More importantly, we look into the intriguing question of fusing a large ensemble of sub-systems and the potential benefit of large-scale collaboration.Peer reviewe

Discriminative features for GMM and i-vector based speaker diarization

Speaker diarization has received several research attentions over the last decade. Among the different domains of speaker diarization, diarization in meeting domain is the most challenging one. It usually contains spontaneous speech and is, for example, susceptible to reverberation. The appropriate selection of speech features is one of the factors that affect the performance of speaker diarization systems. Mel Frequency Cepstral Coefficients (MFCC) are the most widely used short-term speech features in speaker diarization. Other factors that affect the performance of speaker diarization systems are the techniques employed to perform both speaker segmentation and speaker clustering. In this thesis, we have proposed the use of jitter and shimmer long-term voice-quality features both for Gaussian Mixture Modeling (GMM) and i-vector based speaker diarization systems. The voice-quality features are used together with the state-of-the-art short-term cepstral and long-term speech ones. The long-term features consist of prosody and Glottal-to-Noise excitation ratio (GNE) descriptors. Firstly, the voice-quality, prosodic and GNE features are stacked in the same feature vector. Then, they are fused with cepstral coefficients at the score likelihood level both for the proposed Gaussian Mixture Modeling (GMM) and i-vector based speaker diarization systems. For the proposed GMM based speaker diarization system, independent HMM models are estimated from the short-term and long-term speech feature sets. The fusion of the short-term descriptors with the long-term ones in speaker segmentation is carried out by linearly weighting the log-likelihood scores of Viterbi decoding. In the case of speaker clustering, the fusion of the short-term cepstral features with the long-term ones is carried out by linearly fusing the Bayesian Information Criterion (BIC) scores corresponding to these feature sets. For the proposed i-vector based speaker diarization system, the speaker segmentation is carried out exactly the same as in the previously mentioned GMM based speaker diarization system. However, the speaker clustering technique is based on the recently introduced factor analysis paradigm. Two set of i-vectors are extracted from the speaker segmentation hypothesis. Whilst the first i-vector is extracted from short-term cepstral features, the second one is extracted from the voice quality, prosody and GNE descriptors. Then, the cosine-distance and Probabilistic Linear Discriminant Analysis (PLDA) scores of i-vectors are linearly weighted to obtain a fused similarity score. Finally, the fused score is used as speaker clustering distance. We have also proposed the use of delta dynamic features for speaker clustering. The motivation for using deltas in clustering is that delta dynamic features capture the transitional characteristics of the speech signal which contain speaker specific information. This information is not captured by the static cepstral coefficients. The delta features are used together with the short-term static cepstral coefficients and long-term speech features (i.e., voice-quality, prosody and GNE) both for GMM and i-vector based speaker diarization systems. The experiments have been carried out on Augmented Multi-party Interaction (AMI) meeting corpus. The experimental results show that the use of voice-quality, prosody, GNE and delta dynamic features improve the performance of both GMM and i-vector based speaker diarization systems.La diarización del altavoz ha recibido varias atenciones de investigación durante la última década. Entre los diferentes dominios de la diarización del hablante, la diarización en el dominio del encuentro es la más difícil. Normalmente contiene habla espontánea y, por ejemplo, es susceptible de reverberación. La selección apropiada de las características del habla es uno de los factores que afectan el rendimiento de los sistemas de diarización de los altavoces. Los Coeficientes Cepstral de Frecuencia Mel (MFCC) son las características de habla de corto plazo más utilizadas en la diarización de los altavoces. Otros factores que afectan el rendimiento de los sistemas de diarización del altavoz son las técnicas empleadas para realizar tanto la segmentación del altavoz como el agrupamiento de altavoces. En esta tesis, hemos propuesto el uso de jitter y shimmer características de calidad de voz a largo plazo tanto para GMM y i-vector basada en sistemas de diarización de altavoces. Las características de calidad de voz se utilizan junto con el estado de la técnica a corto plazo cepstral y de larga duración de habla. Las características a largo plazo consisten en la prosodia y los descriptores de relación de excitación Glottal-a-Ruido (GNE). En primer lugar, las características de calidad de voz, prosódica y GNE se apilan en el mismo vector de características. A continuación, se fusionan con coeficientes cepstrales en el nivel de verosimilitud de puntajes tanto para los sistemas de diarización de altavoces basados ¿¿en el modelo Gaussian Mixture Modeling (GMM) como en los sistemas basados ¿¿en i-vector. . Para el sistema de diarización de altavoces basado en GMM propuesto, se calculan modelos HMM independientes a partir de cada conjunto de características. En la segmentación de los altavoces, la fusión de los descriptores a corto plazo con los de largo plazo se lleva a cabo mediante la ponderación lineal de las puntuaciones log-probabilidad de decodificación Viterbi. En la agrupación de altavoces, la fusión de las características cepstrales a corto plazo con las de largo plazo se lleva a cabo mediante la fusión lineal de las puntuaciones Bayesian Information Criterion (BIC) correspondientes a estos conjuntos de características. Para el sistema de diarización de altavoces basado en un vector i, la fusión de características se realiza exactamente igual a la del sistema basado en GMM antes mencionado. Sin embargo, la técnica de agrupación de altavoces se basa en el paradigma de análisis de factores recientemente introducido. Dos conjuntos de i-vectores se extraen de la hipótesis de segmentación de altavoz. Mientras que el primer vector i se extrae de características espectrales a corto plazo, el segundo se extrae de los descriptores de calidad de voz apilados, prosódicos y GNE. A continuación, las puntuaciones de coseno-distancia y Probabilistic Linear Discriminant Analysis (PLDA) entre i-vectores se ponderan linealmente para obtener una puntuación de similitud fundida. Finalmente, la puntuación fusionada se utiliza como distancia de agrupación de altavoces. También hemos propuesto el uso de características dinámicas delta para la agrupación de locutores. La motivación para el uso de deltas en la agrupación es que las características dinámicas delta capturan las características de transición de la señal de voz que contienen información específica del locutor. Esta información no es capturada por los coeficientes cepstrales estáticos. Las características delta se usan junto con los coeficientes cepstrales estáticos a corto plazo y las características de voz a largo plazo (es decir, calidad de voz, prosodia y GNE) tanto para sistemas de diarización de altavoces basados en GMM como en sistemas i-vector. Los resultados experimentales sobre AMI muestran que el uso de calidad vocal, prosódica, GNE y dinámicas delta mejoran el rendimiento de los sistemas de diarización de altavoces basados en GMM e i-vector.Postprint (published version