4,346 research outputs found

    Wideband radar cross section reduction of slot antennas arrays

    Get PDF
    A comprehensive analysis aimed at reducing the radar cross section (RCS) of array antennas, preserving at the same time their radiating performance, is presented. A microstrip slot array is considered as a test case to illustrate the proposed strategy for radar cross section reduction (RCSR). It is shown that a remarkable reduction of the radar signature can be accomplished over a frequency band as wide as two octaves by employing an array of periodic resistive elements in front of the radiating apertures. The monostatic and bistatic RCS of the proposed structures are investigated both for normal and oblique incidence. Different arrangements and geometries of the periodic resistive pattern are thoroughly analyzed showing the benefits and the drawbacks in terms of antenna gain and level of the scattered fields. Furthermore, the use of metallic parasitic elements for enhancing the antenna gain is considered, and the scattering phenomena caused by their presence are addressed, taking into account the appearance of grating lobes. The antenna designs are also analyzed by resorting to a bidimensional color plot presenting the variation of the reradiated field both in frequency and spatial domain. The guidelines illustrated by the proposed examples can be easily applied to other antenna architectures

    Fractal Metamaterial Absorber with Three-Order Oblique Cross Dipole Slot Structure and its Application for In-band RCS Reduction of Array Antennas

    Get PDF
    To miniaturize the perfect metamaterial absorber, a fractal three-order oblique cross dipole slot structure is proposed and investigated in this paper. The fractal perfect metamaterial absorber (FPMA) consists of two metallic layers separated by a lossy dielectric substrate. The top layer etched a three-order oblique fractal-shaped cross dipole slot set in a square patch and the bottom one is a solid metal. The parametric study is performed for providing practical design guidelines. A prototype with a thickness of 0.0106λ (λ is the wavelength at 3.18 GHz) of the FPMA was designed, fabricated, measured, and is loaded on a 1×10 guidewave slot array antennas to reduce the in-band radar cross section (RCS) based on their surface current distribution. Experiments are carried out to verify the simulation results, and the experimental results show that the absorption at normal incidence is above 90% from 3.17 to 3.22GHz, the size for the absorber is 0.1λ×0.1λ, the three-order FPMA is miniaturized 60% compared with the zero-order ones, and the array antennas significantly obtain the RCS reduction without the radiation deterioration

    Broadband RCS Reduction of Microstrip Patch Antenna Using Bandstop Frequency Selective Surface

    Get PDF
    In this article, a simple and effective approach is presented to reduce the Radar Cross Section (RCS) of microstrip patch antenna in ultra broad frequency band. This approach substitutes a metallic ground plane of a conventional patch antenna with a hybrid ground consisting of bandstop Frequency Selective Surface (FSS) cells with partial metallic plane. To demonstrate the validity of the proposed approach, the influence of different ground planes on antenna’s performance is investigated. Thus, a patch antenna with miniaturized FSS cells is proposed. The results suggest that this antenna shows 3dB RCS reduction almost in the whole out-of operating band within 1-20GHz for wide incident angles when compared to conventional antenna, while its radiation characteristics are sustained simultaneously. The reasonable agreement between the measured and the simulated results verifies the efficiency of the proposed approach. Moreover, this approach doesn’t alter the lightweight, low-profile, easy conformal and easy manufacturing nature of the original antenna and can be extended to obtain low-RCS antennas with metallic planes in broadband that are quite suitable for the applications which are sensitive to the variation of frequencies

    Multi-frequency fine resolution imaging radar instrumentation and data acquisition

    Get PDF
    Development of a dual polarized L-band radar imaging system to be used in conjunction with the present dual polarized X-band radar is described. The technique used called for heterodyning the transmitted frequency from X-band to L-band and again heterodyning the received L-band signals back to X-band for amplification, detection, and recording

    Double-layer Perfect Metamaterial Absorber and Its Application for RCS Reduction of Antenna

    Get PDF
    To reduce the radar cross section (RCS) of a circularly polarized (CP) tilted beam antenna, a double-layer perfect metamaterial absorber (DLPMA) in the microwave frequency is proposed. The DLPMA exhibits a wider band by reducing the distance between the three absorption peaks. Absorbing characteristics are analyzed and the experimental results demonstrate that the proposed absorber works well from 5.95 GHz to 6.86 GHz (relative bandwidth 14.1%) with the thickness of 0.5 mm. Then, the main part of perfect electric conductor ground plane of the CP tilted beam antenna is covered by the DLPMA. Simu¬lated and experimental results reveal that the novel antenna performs well from 5.5 GHz to 7 GHz, and its monostatic RCS is reduced significantly from 5.8 GHz to 7 GHz. The agreement between measured and simulated data validates the present design

    Wideband and UWB antennas for wireless applications. A comprehensive review

    Get PDF
    A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems

    Small Footprint Multilayered Millimeter-Wave Antennas and Feeding Networks for Multi-Dimensional Scanning and High-Density Integrated Systems

    Get PDF
    This paper overviews the state-of-the-art of substrate integrated waveguide (SIW) techniques in the design and realization of innovative low-cost, low-profile and low-loss (L3) millimeter-wave antenna elements, feeding networks and arrays for various wireless applications. Novel classes of multilayered antenna structures and systems are proposed and studied to exploit the vertical dimension of planar structures to overcome certain limita-tions in standard two-dimensional (2-D) topologies. The developed structures are based on two techniques, namely multi-layer stacked structures and E-plane corners. Differ-ent E-plane structures realised with SIW waveguide are presented, thereby demonstrating the potential of the proposed techniques as in multi-polarization antenna feeding. An array of 128 elements shows low SLL and height gain with just 200g of the total weight. Two versions of 2-D scanning multi-beam are presented, which effectively combine frequency scanning with beam forming networks. Adding the benefits of wide band performance to the multilayer structure, two bi-layer structures are investigated. Different stacked antennas and arrays are demonstrated to optimise the targeted antenna performances in the smallest footprint possible. These structures meet the requirement for developing inexpensive compact millimeter-wave antennas and antenna systems. Different structures and architectures are theoretically and experimentally studied and discussed for specific space- and ground-based appli-cations. Practical issues such as high-density integration and high-volume manufacturability are also addressed

    Reconfigurable Reflectarrays and Array Lenses for Dynamic Antenna Beam Control: A Review

    Full text link
    Advances in reflectarrays and array lenses with electronic beam-forming capabilities are enabling a host of new possibilities for these high-performance, low-cost antenna architectures. This paper reviews enabling technologies and topologies of reconfigurable reflectarray and array lens designs, and surveys a range of experimental implementations and achievements that have been made in this area in recent years. The paper describes the fundamental design approaches employed in realizing reconfigurable designs, and explores advanced capabilities of these nascent architectures, such as multi-band operation, polarization manipulation, frequency agility, and amplification. Finally, the paper concludes by discussing future challenges and possibilities for these antennas.Comment: 16 pages, 12 figure
    • …
    corecore