Simultaneous Multislice (SMS) Imaging Techniques

Item does not contain fulltex

Structured low-rank methods for robust 3D multi-shot EPI

Magnetic resonance imaging (MRI) has inherently slow acquisition speed, and Echo-Planar Imaging (EPI), as an efficient acquisition scheme, has been widely used in functional magnetic resonance imaging (fMRI) where an image series with high temporal resolution is needed to measure neuronal activity. Recently, 3D multi-shot EPI which samples data from an entire 3D volume with repeated shots has been drawing growing interest for fMRI with its high isotropic spatial resolution, particularly at ultra-high fields. However, compared to single-shot EPI, multi-shot EPI is sensitive to any inter-shot instabilities, e.g., subject movement and even physiologically induced field fluctuations. These inter-shot inconsistencies can greatly negate the theoretical benefits of 3D multi-shot EPI over conventional 2D multi-slice acquisitions. Structured low-rank image reconstruction which regularises under-sampled image reconstruction by exploiting the linear dependencies in MRI data has been successfully demonstrated in a variety of applications. In this thesis, a structured low-rank reconstruction method is optimised for 3D multi-shot EPI imaging together with a dedicated sampling pattern termed seg-CAIPI, in order to enhance the robustness to physiological fluctuations and improve the temporal stability of 3D multi-shot EPI for fMRI at 7T. Moreover, a motion compensated structured low-rank reconstruction framework is also presented for robust 3D multi-shot EPI which further takes into account inter-shot instabilities due to bulk motion. Lastly, this thesis also investigates into the improvement of structured low-rank reconstruction from an algorithmic perspective and presents the locally structured low-rank reconstruction scheme

STAND-ALONE IMAGE RECONSTRUCTION FOR MULTI-SLICE ECHO-PLANAR IMAGING, WITH APPLICATIONS TO STUDY HUMAN BRAIN FUNCTIONS

Optimizing the speed of image acquisition in magnetic resonance imaging (MRI) is a significant consideration to reduce patient examination time and/or to increase temporal resolution in dynamic studies. The advancement of simultaneous, multi-slice imaging increased the acquisition efficiency of MRI data. This technique for reducing scan time has opened a new door for functional MRI studies and diffusion-based fiber tractography to visualize the structural networks in the human brain [1]. The problem with the existing multi-slice image reconstruction algorithm using the MATLAB [2] program is that it is completely dependent on the MATLAB environment. In addition, the algorithm can be performed only on offline, preventing monitoring of subject motion and brain activation during scanning in order to adjust task presentation and for utilizing the brain signal to control other equipment and neurofeedback. To date, there is no stand-alone method for image reconstruction for multi-slice EPI data. To meet this need, I propose C/C++ programming language-based image reconstruction using the Slice-GRAPPA [3] algorithm for multi-slice acquisition and GRAPPA [4] algorithm for accelerating the image acquisition in the phase encoding direction. The main advantage of this reconstruction based on C/C++ is that it is stand-alone. In addition, optimizing the reconstruction program speed will enable it to be embedded into software to be applied in real time fMRI studies. This process was validated through matching the images from C/C++ language-based reconstruction with MATLAB environment-based reconstruction results. This thesis documents the process used to determine the efficacy of the proposed methodology

Ultra-high spatial resolution BOLD fMRI in humans using combined segmented-accelerated VFA-FLEET with a recursive RF pulse design

Purpose To alleviate the spatial encoding limitations of single-shot EPI by developing multi-shot segmented EPI for ultra-high-resolution fMRI with reduced ghosting artifacts from subject motion and respiration. Methods Segmented EPI can reduce readout duration and reduce acceleration factors, however, the time elapsed between segment acquisitions (on the order of seconds) can result in intermittent ghosting, limiting its use for fMRI. Here, "FLEET" segment ordering--where segments are looped over before slices--was combined with a variable flip angle progression (VFA-FLEET) to improve inter-segment fidelity and maximize signal for fMRI. Scaling a sinc pulse's flip angle for each segment (VFA-FLEET-Sinc) produced inconsistent slice profiles and ghosting, therefore, a recursive Shinnar-Le Roux (SLR) RF pulse design was developed (VFA-FLEET-SLR) to generate unique pulses for every segment that together produce consistent slice profiles and signals. Results The temporal stability of VFA-FLEET-SLR was compared against conventional-segmented EPI and VFA-FLEET-Sinc at 3 T and 7 T. VFA-FLEET-SLR showed reductions in both intermittent and stable ghosting compared to conventional-segmented and VFA-FLEET-Sinc, resulting in improved image quality with a minor trade-off in temporal SNR. Combining VFA-FLEET-SLR with acceleration, we achieved a 0.6-mm isotropic acquisition at 7 T--without zoomed imaging or partial Fourier--demonstrating reliable detection of BOLD responses to a visual stimulus. To counteract the increased repetition time from segmentation, simultaneous multi-slice VFA-FLEET-SLR was demonstrated using RF-encoded controlled aliasing. Conclusions VFA-FLEET with a recursive RF pulse design supports acquisitions with low levels of artifact and spatial blur, enabling fMRI at previously inaccessible spatial resolutions with a "full-brain" field of view.Comment: 51 pages (including supplement), 8 main figures, 6 supporting figures. For supporting videos (8), please visit https://github.com/aveberman/vfa-fleet. Note: this work has been accepted for publication at Magnetic Resonance in Medicin

Development of radiofrequency pulses for fast and motion-robust brain MRI

This thesis is based on three projects and the three scientific articles that were the result of each project. Each project deals with various kinds of technical software development in the field of magnetic resonance imaging (MRI). The projects are in many ways very different, encompassing several acquisition and reconstruction strategies. However, there are at least two common denominators. The first is the projects shared the same goal of producing fast and motion robust methods. The second common denominator is that all the projects were carried out with a particular focus on the radiofrequency (RF) pulses used. The first project combined the acceleration method simultaneous multi-slice (SMS) with the acquisition method called PROPELLER. This combination was utilized to acquire motion-corrected thin-sliced reformattable T2-weighted and T1-FLAIR image volumes, thereby producing a motion robust alternative to 3D sequences. The second project analyzed the effect of the excitation RF pulse on T1-weighted images acquired with 3D echo planar imaging (EPI). It turned out that an RF pulse that reduced magnetization transfer (MT) effects significantly increased the gray/white matter contrast. The 3D EPI sequence was then used to rapidly image tumor patients after gadolinium enhancement. The third project combined PROPELLER’s retrospective motion correction with the prospective motion correction of an intelligent marker (the WRAD). With this combination, sharp T1-FLAIR images were acquired during large continuous head movements

A Fourier Description of Covariance, and Separation of Simultaneously Encoded Slices with In-Plane Acceleration in fMRI

Functional magnetic resonance imaging (fMRI) studies aim to identify localized neural regions associated with a cognitive task performed by the subject. An indirect measure of the brain activity is the blood oxygenation level dependent (BOLD) signal fluctuations observed within the complex-valued spatial frequencies measured over time. The standard practice in fMRI is to discard the phase information after image reconstruction, even with evidence of biological task-related change in the phase time-series. In the first aim of this dissertation, a complex-valued time-series covariance is derived as a linear combination of second order temporal Fourier frequency coefficients. As opposed to magnitude-only analysis, the complex-valued covariance increases the sensitivity and specificity in fMRI correlation analysis, which is particularly advantageous for low contrast-to-noise ratio (CNR) fMRI time-series. In the remaining aims, increased statistical significance is achieved through a higher sampling rate of the fMRI time-course, by simultaneously magnetizing multiple slice images. With multi-frequency band excitations, a single k-space readout reconstructs to an image of composite aliased slice images. To disentangle the signal, or aliased voxels, phase and coil encoding techniques are incorporated into the data acquisition and image reconstruction. Inter-slice signal leakage, which also manifests as improper placement of the BOLD signal, presents in the separated slice images from induced correlations as a result of suboptimal simultaneous multi-slice (SMS) reconstruction methods. In the second aim of this dissertation, the Multi-coil Separation of Parallel Encoded Complex-valued Slices (mSPECS) reconstruction method is proposed as a solution to preserve the activation statistics in the separated slice images through a Bayesian approach of sampling calibration images. In the third aim of this dissertation, the mSPECS reconstruction is extended to include In-Plane Acceleration (mSPECS-IPA), to reconstruct aliased slice images with additional in-plane subsampling using a two-dimensional orthogonal phase encoding derivation of Hadamard encoding. Mitigating induced correlations with mSPECS(-IPA), results in accurately placed functional activation in the previously aliased complex-valued slice images. The development of novel complex-valued analysis and reconstruction methods in fMRI strengthens the significance of the activation statistics and precludes inter-slice signal leakage, so the true underlying neural dynamics are modeled in complex-valued fMRI data analysis

Accurate modeling of temporal correlations in rapidly sampled fMRI time series

Rapid imaging techniques are increasingly used in functional MRI studies because they allow a greater number of samples to be acquired per unit time, thereby increasing statistical power. However, temporal correlations limit the increase in functional sensitivity and must be accurately accounted for to control the false-positive rate. A common approach to accounting for temporal correlations is to whiten the data prior to estimating fMRI model parameters. Models of white noise plus a first-order autoregressive process have proven sufficient for conventional imaging studies, but more elaborate models are required for rapidly sampled data. Here we show that when the "FAST" model implemented in SPM is used with a well-controlled number of parameters, it can successfully prewhiten 80% of grey matter voxels even with volume repetition times as short as 0.35 s. We further show that the temporal signal-to-noise ratio (tSNR), which has conventionally been used to assess the relative functional sensitivity of competing imaging approaches, can be augmented to account for the temporal correlations in the time series. This amounts to computing the t-score testing for the mean signal. We show in a visual perception task that unlike the tSNR weighted by the number of samples, the t-score measure is directly related to the t-score testing for activation when the temporal correlations are correctly modeled. This score affords a more accurate means of evaluating the functional sensitivity of different data acquisition options

Does higher sampling rate (multiband + SENSE) improve group statistics - An example from social neuroscience block design at 3T

Multiband (MB) or Simultaneous multi-slice (SMS) acquisition schemes allow the acquisition of MRI signals from more than one spatial coordinate at a time. Commercial availability has brought this technique within the reach of many neuroscientists and psychologists. Most early evaluation of the performance of MB acquisition employed resting state fMRI or the most basic tasks. In this study, we tested whether the advantages of using MB acquisition schemes generalize to group analyses using a cognitive task more representative of typical cognitive neuroscience applications. Twenty-three subjects were scanned on a Philips 3 ​T scanner using five sequences, up to eight-fold acceleration with MB-factors 1 to 4, SENSE factors up to 2 and corresponding TRs of 2.45s down to 0.63s, while they viewed (i) movie blocks showing complex actions with hand object interactions and (ii) control movie blocks without hand object interaction. Data were processed using a widely used analysis pipeline implemented in SPM12 including the unified segmentation and canonical HRF modelling. Using random effects group-level, voxel-wise analysis we found that all sequences were able to detect the basic action observation network known to be recruited by our task. The highest t-values were found for sequences with MB4 acceleration. For the MB1 sequence, a 50% bigger voxel volume was needed to reach comparable t-statistics. The group-level t-values for resting state networks (RSNs) were also highest for MB4 sequences. Here the MB1 sequence with larger voxel size did not perform comparable to the MB4 sequence. Altogether, we can thus recommend the use of MB4 (and SENSE 1.5 or 2) on a Philips scanner when aiming to perform group-level analyses using cognitive block design fMRI tasks and voxel sizes in the range of cortical thickness (e.g. 2.7 ​mm isotropic). While results will not be dramatically changed by the use of multiband, our results suggest that MB will bring a moderate but significant benefit