3,634 research outputs found
Future developments in brain-machine interface research
Neuroprosthetic devices based on brain-machine interface technology hold promise for the restoration of body mobility in patients suffering from devastating motor deficits caused by brain injury, neurologic diseases and limb loss. During the last decade, considerable progress has been achieved in this multidisciplinary research, mainly in the brain-machine interface that enacts upper-limb functionality. However, a considerable number of problems need to be resolved before fully functional limb neuroprostheses can be built. To move towards developing neuroprosthetic devices for humans, brain-machine interface research has to address a number of issues related to improving the quality of neuronal recordings, achieving stable, long-term performance, and extending the brain-machine interface approach to a broad range of motor and sensory functions. Here, we review the future steps that are part of the strategic plan of the Duke University Center for Neuroengineering, and its partners, the Brazilian National Institute of Brain-Machine Interfaces and the École Polytechnique Fédérale de Lausanne (EPFL) Center for Neuroprosthetics, to bring this new technology to clinical fruition
Electromyography-Based Control of Lower Limb Prostheses: A Systematic Review
Most amputations occur in lower limbs and despite improvements in prosthetic technology, no commercially available prosthetic leg uses electromyography (EMG) information as an input for control. Efforts to integrate EMG signals as part of the control strategy have increased in the last decade. In this systematic review, we summarize the research in the field of lower limb prosthetic control using EMG. Four different online databases were searched until June 2022: Web of Science, Scopus, PubMed, and Science Direct. We included articles that reported systems for controlling a prosthetic leg (with an ankle and/or knee actuator) by decoding gait intent using EMG signals alone or in combination with other sensors. A total of 1,331 papers were initially assessed and 121 were finally included in this systematic review. The literature showed that despite the burgeoning interest in research, controlling a leg prosthesis using EMG signals remains challenging. Specifically, regarding EMG signal quality and stability, electrode placement, prosthetic hardware, and control algorithms, all of which need to be more robust for everyday use. In the studies that were investigated, large variations were found between the control methodologies, type of research participant, recording protocols, assessments, and prosthetic hardware
Decoding Lower Limb Muscle Activity and Kinematics from Cortical Neural Spike Trains during Monkey Performing Stand and Squat Movements
abstract: Extensive literatures have shown approaches for decoding upper limb kinematics or muscle activity using multichannel cortical spike recordings toward brain machine interface (BMI) applications. However, similar topics regarding lower limb remain relatively scarce. We previously reported a system for training monkeys to perform visually guided stand and squat tasks. The current study, as a follow-up extension, investigates whether lower limb kinematics and muscle activity characterized by electromyography (EMG) signals during monkey performing stand/squat movements can be accurately decoded from neural spike trains in primary motor cortex (M1). Two monkeys were used in this study. Subdermal intramuscular EMG electrodes were implanted to 8 right leg/thigh muscles. With ample data collected from neurons from a large brain area, we performed a spike triggered average (SpTA) analysis and got a series of density contours which revealed the spatial distributions of different muscle-innervating neurons corresponding to each given muscle. Based on the guidance of these results, we identified the locations optimal for chronic electrode implantation and subsequently carried on chronic neural data recordings. A recursive Bayesian estimation framework was proposed for decoding EMG signals together with kinematics from M1 spike trains. Two specific algorithms were implemented: a standard Kalman filter and an unscented Kalman filter. For the latter one, an artificial neural network was incorporated to deal with the nonlinearity in neural tuning. High correlation coefficient and signal to noise ratio between the predicted and the actual data were achieved for both EMG signals and kinematics on both monkeys. Higher decoding accuracy and faster convergence rate could be achieved with the unscented Kalman filter. These results demonstrate that lower limb EMG signals and kinematics during monkey stand/squat can be accurately decoded from a group of M1 neurons with the proposed algorithms. Our findings provide new insights for extending current BMI design concepts and techniques on upper limbs to lower limb circumstances. Brain controlled exoskeleton, prostheses or neuromuscular electrical stimulators for lower limbs are expected to be developed, which enables the subject to manipulate complex biomechatronic devices with mind in more harmonized manner.View the article as published at http://journal.frontiersin.org/article/10.3389/fnins.2017.00044/ful
Overcoming barriers and increasing independence: service robots for elderly and disabled people
This paper discusses the potential for service robots to overcome barriers and increase independence of
elderly and disabled people. It includes a brief overview of the existing uses of service robots by disabled and elderly
people and advances in technology which will make new uses possible and provides suggestions for some of these new
applications. The paper also considers the design and other conditions to be met for user acceptance. It also discusses
the complementarity of assistive service robots and personal assistance and considers the types of applications and
users for which service robots are and are not suitable
Choreographic and Somatic Approaches for the Development of Expressive Robotic Systems
As robotic systems are moved out of factory work cells into human-facing
environments questions of choreography become central to their design,
placement, and application. With a human viewer or counterpart present, a
system will automatically be interpreted within context, style of movement, and
form factor by human beings as animate elements of their environment. The
interpretation by this human counterpart is critical to the success of the
system's integration: knobs on the system need to make sense to a human
counterpart; an artificial agent should have a way of notifying a human
counterpart of a change in system state, possibly through motion profiles; and
the motion of a human counterpart may have important contextual clues for task
completion. Thus, professional choreographers, dance practitioners, and
movement analysts are critical to research in robotics. They have design
methods for movement that align with human audience perception, can identify
simplified features of movement for human-robot interaction goals, and have
detailed knowledge of the capacity of human movement. This article provides
approaches employed by one research lab, specific impacts on technical and
artistic projects within, and principles that may guide future such work. The
background section reports on choreography, somatic perspectives,
improvisation, the Laban/Bartenieff Movement System, and robotics. From this
context methods including embodied exercises, writing prompts, and community
building activities have been developed to facilitate interdisciplinary
research. The results of this work is presented as an overview of a smattering
of projects in areas like high-level motion planning, software development for
rapid prototyping of movement, artistic output, and user studies that help
understand how people interpret movement. Finally, guiding principles for other
groups to adopt are posited.Comment: Under review at MDPI Arts Special Issue "The Machine as Artist (for
the 21st Century)"
http://www.mdpi.com/journal/arts/special_issues/Machine_Artis
System Identification of Bipedal Locomotion in Robots and Humans
The ability to perform a healthy walking gait can be altered in numerous cases due to gait disorder related pathologies. The latter could lead to partial or complete mobility loss, which affects the patients’ quality of life. Wearable exoskeletons and active prosthetics have been considered as a key component to remedy this mobility loss. The control of such devices knows numerous challenges that are yet to be addressed. As opposed to fixed trajectories control, real-time adaptive reference generation control is likely to provide the wearer with more intent control over the powered device. We propose a novel gait pattern generator for the control of such devices, taking advantage of the inter-joint coordination in the human gait. Our proposed method puts the user in the control loop as it maps the motion of healthy limbs to that of the affected one. To design such control strategy, it is critical to understand the dynamics behind bipedal walking. We begin by studying the simple compass gait walker. We examine the well-known Virtual Constraints method of controlling bipedal robots in the image of the compass gait. In addition, we provide both the mechanical and control design of an affordable research platform for bipedal dynamic walking. We then extend the concept of virtual constraints to human locomotion, where we investigate the accuracy of predicting lower limb joints angular position and velocity from the motion of the other limbs. Data from nine healthy subjects performing specific locomotion tasks were collected and are made available online. A successful prediction of the hip, knee, and ankle joints was achieved in different scenarios. It was also found that the motion of the cane alone has sufficient information to help predict good trajectories for the lower limb in stairs ascent. Better estimates were obtained using additional information from arm joints. We also explored the prediction of knee and ankle trajectories from the motion of the hip joints
Locomotion Optimization of Photoresponsive Small-scale Robot: A Deep Reinforcement Learning Approach
Soft robots comprise of elastic and flexible structures, and actuatable soft materials are often used to provide stimuli-responses, remotely controlled with different kinds of external stimuli, which is beneficial for designing small-scale devices. Among different stimuli-responsive materials, liquid crystal networks (LCNs) have gained a significant amount of attention for soft small-scale robots in the past decade being stimulated and actuated by light, which is clean energy, able to transduce energy remotely, easily available and accessible to sophisticated control.
One of the persistent challenges in photoresponsive robotics is to produce controllable autonomous locomotion behavior. In this Thesis, different types of photoresponsive soft robots were used to realize light-powered locomotion, and an artificial intelligence-based approach was developed for controlling the movement. A robot tracking system, including an automatic laser steering function, was built for efficient robotic feature detection and steering the laser beam automatically to desired locations. Another robot prototype, a swimmer robot, driven by the automatically steered laser beam, showed directional movements including some degree of uncertainty and randomness in their locomotion behavior.
A novel approach is developed to deal with the challenges related to the locomotion of photoresponsive swimmer robots. Machine learning, particularly deep reinforcement learning method, was applied to develop a control policy for autonomous locomotion behavior. This method can learn from its experiences by interacting with the robot and its environment without explicit knowledge of the robot structure, constituent material, and robotic mechanics. Due to the requirement of a large number of experiences to correlate the goodness of behavior control, a simulator was developed, which mimicked the uncertain and random movement behavior of the swimmer robots. This approach effectively adapted the random movement behaviors and developed an optimal control policy to reach different destination points autonomously within a simulated environment. This work has successfully taken a step towards the autonomous locomotion control of soft photoresponsive robots
Exploring the Application of Wearable Movement Sensors in People with Knee Osteoarthritis
People with knee osteoarthritis have difficulty with functional activities, such as walking or get into/out of a chair. This thesis explored the clinical relevance of biomechanics and how wearable sensor technology may be used to assess how people move when their clinician is unable to directly observe them, such as at home or work. The findings of this thesis suggest that artificial intelligence can be used to process data from sensors to provide clinically important information about how people perform troublesome activities
Sample-Efficient Co-Design of Robotic Agents Using Multi-fidelity Training on Universal Policy Network
Co-design involves simultaneously optimizing the controller and agents
physical design. Its inherent bi-level optimization formulation necessitates an
outer loop design optimization driven by an inner loop control optimization.
This can be challenging when the design space is large and each design
evaluation involves data-intensive reinforcement learning process for control
optimization. To improve the sample-efficiency we propose a
multi-fidelity-based design exploration strategy based on Hyperband where we
tie the controllers learnt across the design spaces through a universal policy
learner for warm-starting the subsequent controller learning problems. Further,
we recommend a particular way of traversing the Hyperband generated design
matrix that ensures that the stochasticity of the Hyperband is reduced the most
with the increasing warm starting effect of the universal policy learner as it
is strengthened with each new design evaluation. Experiments performed on a
wide range of agent design problems demonstrate the superiority of our method
compared to the baselines. Additionally, analysis of the optimized designs
shows interesting design alterations including design simplifications and
non-intuitive alterations that have emerged in the biological world.Comment: 17 pages, 10 figure
- …