333,075 research outputs found
Parametric and cycle tests of a 40-A-hr bipolar nickel-hydrogen battery
A series of tests was performed to characterize battery performance relating to certain operating parameters which included charge current, discharge current, temperature and pressure. The parameters were varied to confirm battery design concepts and to determine optimal operating conditions. Spacecraft power requirements are constantly increasing. Special spacecraft such as the Space Station and platforms will require energy storage systems of 130 and 25 kWh, respectively. The complexity of these high power systems will demand high reliability, and reduced mass and volume. A system that uses batteries for storage will require a cell count in excess of 400 units. These cell units must then be assembled into several batteries with over 100 cells in a series connected string. In an attempt to simplify the construction of conventional cells and batteries, the NASA Lewis Research Center battery systems group initiated work on a nickel-hydrogen battery in a bipolar configuration in early 1981. Features of the battery with this bipolar construction show promise in improving both volumetric and gravimetric energy densities as well as thermal management. Bipolar construction allows cooling in closer proximity to the cell components, thus heat removal can be accomplished at a higher rejection temperature than conventional cell designs. Also, higher current densities are achievable because of low cell impedance. Lower cell impedance is achieved via current flow perpendicular to the electrode face, thus reducing voltage drops in the electrode grid and electrode terminals tabs
Securing Internet Protocol (IP) Storage: A Case Study
Storage networking technology has enjoyed strong growth in recent years, but
security concerns and threats facing networked data have grown equally fast.
Today, there are many potential threats that are targeted at storage networks,
including data modification, destruction and theft, DoS attacks, malware,
hardware theft and unauthorized access, among others. In order for a Storage
Area Network (SAN) to be secure, each of these threats must be individually
addressed. In this paper, we present a comparative study by implementing
different security methods in IP Storage network.Comment: 10 Pages, IJNGN Journa
Porous materials in building energy technologies—a review of the applications, modelling and experiments
Improving energy efficiency in buildings is central to achieving the goals set by Paris agreement in 2015, as it reduces the energy consumption and consequently the emission of greenhouse gases without jeopardising human comfort. The literature includes a large number of articles on energy performance of the residential and commercial buildings. Many researchers have examined porous materials as affordable and promising means of improving the energy efficiency of buildings. Further, some of the natural media involved in building energy technologies are porous. However, currently, there is no review article exclusively focused on the porous media pertinent to the building energy technologies. Accordingly, this article performs a review of literature on the applications, modelling and experimental studies about the materials containing macro, micro, and nano-porous media and their advantages and limitations in different building energy technologies. These include roof cooling, ground-source heat pumps and heat exchangers, insulations, and thermal energy storage systems. The progress made and the remaining challenges in each technology are discussed and some conclusions and suggestions are made for the future research
Hierarchical macro-nanoporous metals for leakage-free high-thermal conductivity shape-stabilized phase change materials
Impregnation of Phase Change Materials (PCMs) into a porous medium is a
promising way to stabilize their shape and improve thermal conductivity which
are essential for thermal energy storage and thermal management of small-size
applications, such as electronic devices or batteries. However, in these
composites a general understanding of how leakage is related to the
characteristics of the porous material is still lacking. As a result, the
energy density and the antileakage capability are often antagonistically
coupled. In this work we overcome the current limitations, showing that a high
energy density can be reached together with superior anti-leakage performance
by using hierarchical macro-nanoporous metals for PCMs impregnation. By
analyzing capillary phenomena and synthesizing a new type of material, it was
demonstrated that a hierarchical trimodal macro-nanoporous metal (copper)
provides superior antileakage capability (due to strong capillary forces of
nanopores), high energy density (90vol% of PCM load due to macropores) and
improves the charging/discharging kinetics, due to a three-fold enhancement of
thermal conductivity. It was further demonstrated by CFD simulations that such
a composite can be used for thermal management of a battery pack and unlike
pure PCM it is capable of maintaining the maximum temperature below the safety
limit. The present results pave the way for the application of hierarchical
macro-nanoporous metals for high-energy density, leakage-free, and
shape-stabilized PCMs with enhanced thermal conductivity. These innovative
composites can significantly facilitate the thermal management of compact
systems such as electronic devices or high-power batteries by improving their
efficiency, durability and sustainabilit
Solar timber kilns: State of the art and foreseeable developments
Analysis of the evolution in solar heated drying kilns in recent decades shows that there have been a series of modifications to optimize their thermal and drying efficiency. Using an analysis method based on product design, we report on existing solar timber kilns. The dryers and their component units are studied, developments are noted, focusing on changing trends in technological systems. As a result of this analysis we suggest some future adaptations
- …