157 research outputs found
Improving Energy Efficiency Through Multimode Transmission in the Downlink MIMO Systems
Adaptively adjusting system parameters including bandwidth, transmit power
and mode to maximize the "Bits per-Joule" energy efficiency (BPJ-EE) in the
downlink MIMO systems with imperfect channel state information at the
transmitter (CSIT) is considered in this paper. By mode we refer to choice of
transmission schemes i.e. singular value decomposition (SVD) or block
diagonalization (BD), active transmit/receive antenna number and active user
number. We derive optimal bandwidth and transmit power for each dedicated mode
at first. During the derivation, accurate capacity estimation strategies are
proposed to cope with the imperfect CSIT caused capacity prediction problem.
Then, an ergodic capacity based mode switching strategy is proposed to further
improve the BPJ-EE, which provides insights on the preferred mode under given
scenarios. Mode switching compromises different power parts, exploits the
tradeoff between the multiplexing gain and the imperfect CSIT caused inter-user
interference, improves the BPJ-EE significantly.Comment: 19 pages, 10 figures, EURASIP Journal on Wireless Communications and
Networking; EURASIP Journal on Wireless Communications and Networking (2011)
2011:20
Massive MIMO Systems with Non-Ideal Hardware: Energy Efficiency, Estimation, and Capacity Limits
The use of large-scale antenna arrays can bring substantial improvements in
energy and/or spectral efficiency to wireless systems due to the greatly
improved spatial resolution and array gain. Recent works in the field of
massive multiple-input multiple-output (MIMO) show that the user channels
decorrelate when the number of antennas at the base stations (BSs) increases,
thus strong signal gains are achievable with little inter-user interference.
Since these results rely on asymptotics, it is important to investigate whether
the conventional system models are reasonable in this asymptotic regime. This
paper considers a new system model that incorporates general transceiver
hardware impairments at both the BSs (equipped with large antenna arrays) and
the single-antenna user equipments (UEs). As opposed to the conventional case
of ideal hardware, we show that hardware impairments create finite ceilings on
the channel estimation accuracy and on the downlink/uplink capacity of each UE.
Surprisingly, the capacity is mainly limited by the hardware at the UE, while
the impact of impairments in the large-scale arrays vanishes asymptotically and
inter-user interference (in particular, pilot contamination) becomes
negligible. Furthermore, we prove that the huge degrees of freedom offered by
massive MIMO can be used to reduce the transmit power and/or to tolerate larger
hardware impairments, which allows for the use of inexpensive and
energy-efficient antenna elements.Comment: To appear in IEEE Transactions on Information Theory, 28 pages, 15
figures. The results can be reproduced using the following Matlab code:
https://github.com/emilbjornson/massive-MIMO-hardware-impairment
Efficient radio resource management in next generation wireless networks
The current decade has witnessed a phenomenal growth in mobile wireless communication
networks and subscribers. In 2015, mobile wireless devices and connections were reported to have grown to about 7.9 billion, exceeding human
population. The explosive growth in mobile wireless communication network subscribers has created a huge demand for wireless network capacity,
ubiquitous wireless network coverage, and enhanced Quality of Service (QoS). These demands have led to several challenging problems for wireless
communication networks operators and designers. The Next Generation Wireless Networks (NGWNs) will support high mobility communications, such as
communication in high-speed rails. Mobile users in such high mobility environment demand reliable QoS, however, such users are plagued with a
poor signal-tonoise ratio, due to the high vehicular penetration loss, increased transmission outage and handover information overhead, leading
to poor QoS provisioning for the networks' mobile users. Providing a reliable QoS for high mobility users remains one of the unique challenges
for NGWNs. The increased wireless network capacity and coverage of NGWNs means that mobile communication users at the cell-edge should have
enhanced network performance. However, due to path loss (path attenuation), interference, and radio background noise, mobile communication
users at the cell-edge can experience relatively poor transmission channel qualities and subsequently forced to transmit at a low bit transmission
rate, even when the wireless communication networks can support high bit transmission rate. Furthermore, the NGWNs are envisioned to be Heterogeneous
Wireless Networks (HWNs). The NGWNs are going to be the integration platform of diverse homogeneous wireless communication networks for a convergent
wireless communication network. The HWNs support single and multiple calls (group calls), simultaneously. Decision making is an integral core of radio
resource management. One crucial decision making in HWNs is network selection. Network selection addresses the problem of how to select the best
available access network for a given network user connection. For the integrated platform of HWNs to be truly seamless and
efficient, a robust and stable wireless access network selection algorithm is needed. To meet these challenges for the
different mobile wireless communication network users, the NGWNs will have to provide a great leap in wireless network capacity, coverage,
QoS, and radio resource utilization. Moving wireless communication networks (mobile hotspots) have been proposed as a solution to providing
reliable QoS to high mobility users. In this thesis, an Adaptive Thinning Mobility Aware (ATMA) Call Admission Control (CAC) algorithm for
improving the QoS and radio resource utilization of the mobile hotspot networks, which are of critical importance for communicating nodes
in moving wireless networks is proposed. The performance of proposed ATMA CAC scheme is investigated and compare it with the traditional
CAC scheme. The ATMA scheme exploits the mobility events in the highspeed mobility communication environment and the calls (new and
handoff calls) generation pattern to enhance the QoS (new call blocking and
handoff call dropping probabilities) of the mobile users. The numbers of new and
handoff calls in wireless communication networks are dynamic random processes that can be
effectively modeled by the Continuous Furthermore, the NGWNs are envisioned to be Heterogeneous Wireless Networks (HWNs).
The NGWNs are going to be the integration platform of diverse homogeneous wireless communication networks for a convergent
wireless communication network. The HWNs support single and multiple calls (group calls), simultaneously. Decision making is an
integral core of radio resource management. One crucial decision making in HWNs is network selection. Network selection addresses
the problem of how to select the best available access network for a given network user connection. For the integrated platform of
HWNs to be truly seamless and efficient, a robust and stable wireless access network selection algorithm is needed. To meet these
challenges for the different mobile wireless communication network users, the NGWNs will have to provide a great leap in wireless
network capacity, coverage, QoS, and radio resource utilization. Moving wireless communication networks (mobile hotspots) have been
proposed as a solution to providing reliable QoS to high mobility users. In this thesis, an Adaptive Thinning Mobility Aware (ATMA)
Call Admission Control (CAC) algorithm for improving the QoS and radio resource utilization of the mobile hotspot networks, which are
of critical importance for communicating nodes in moving wireless networks is proposed
- …