Low-cost and efficient fault detection and diagnosis schemes for modern cores

Continuous improvements in transistor scaling together with microarchitectural advances have made possible the widespread adoption of high-performance processors across all market segments. However, the growing reliability threats induced by technology scaling and by the complexity of designs are challenging the production of cheap yet robust systems. Soft error trends are haunting, especially for combinational logic, and parity and ECC codes are therefore becoming insufficient as combinational logic turns into the dominant source of soft errors. Furthermore, experts are warning about the need to also address intermittent and permanent faults during processor runtime, as increasing temperatures and device variations will accelerate inherent aging phenomena. These challenges specially threaten the commodity segments, which impose requirements that existing fault tolerance mechanisms cannot offer. Current techniques based on redundant execution were devised in a time when high penalties were assumed for the sake of high reliability levels. Novel light-weight techniques are therefore needed to enable fault protection in the mass market segments. The complexity of designs is making post-silicon validation extremely expensive. Validation costs exceed design costs, and the number of discovered bugs is growing, both during validation and once products hit the market. Fault localization and diagnosis are the biggest bottlenecks, magnified by huge detection latencies, limited internal observability, and costly server farms to generate test outputs. This thesis explores two directions to address some of the critical challenges introduced by unreliable technologies and by the limitations of current validation approaches. We first explore mechanisms for comprehensively detecting multiple sources of failures in modern processors during their lifetime (including transient, intermittent, permanent and also design bugs). Our solutions embrace a paradigm where fault tolerance is built based on exploiting high-level microarchitectural invariants that are reusable across designs, rather than relying on re-execution or ad-hoc block-level protection. To do so, we decompose the basic functionalities of processors into high-level tasks and propose three novel runtime verification solutions that combined enable global error detection: a computation/register dataflow checker, a memory dataflow checker, and a control flow checker. The techniques use the concept of end-to-end signatures and allow designers to adjust the fault coverage to their needs, by trading-off area, power and performance. Our fault injection studies reveal that our methods provide high coverage levels while causing significantly lower performance, power and area costs than existing techniques. Then, this thesis extends the applicability of the proposed error detection schemes to the validation phases. We present a fault localization and diagnosis solution for the memory dataflow by combining our error detection mechanism, a new low-cost logging mechanism and a diagnosis program. Selected internal activity is continuously traced and kept in a memory-resident log whose capacity can be expanded to suite validation needs. The solution can catch undiscovered bugs, reducing the dependence on simulation farms that compute golden outputs. Upon error detection, the diagnosis algorithm analyzes the log to automatically locate the bug, and also to determine its root cause. Our evaluations show that very high localization coverage and diagnosis accuracy can be obtained at very low performance and area costs. The net result is a simplification of current debugging practices, which are extremely manual, time consuming and cumbersome. Altogether, the integrated solutions proposed in this thesis capacitate the industry to deliver more reliable and correct processors as technology evolves into more complex designs and more vulnerable transistors.El continuo escalado de los transistores junto con los avances microarquitectónicos han posibilitado la presencia de potentes procesadores en todos los segmentos de mercado. Sin embargo, varios problemas de fiabilidad están desafiando la producción de sistemas robustos. Las predicciones de "soft errors" son inquietantes, especialmente para la lógica combinacional: soluciones como ECC o paridad se están volviendo insuficientes a medida que dicha lógica se convierte en la fuente predominante de soft errors. Además, los expertos están alertando acerca de la necesidad de detectar otras fuentes de fallos (causantes de errores permanentes e intermitentes) durante el tiempo de vida de los procesadores. Los segmentos "commodity" son los más vulnerables, ya que imponen unos requisitos que las técnicas actuales de fiabilidad no ofrecen. Estas soluciones (generalmente basadas en re-ejecución) fueron ideadas en un tiempo en el que con tal de alcanzar altos nivel de fiabilidad se asumían grandes costes. Son por tanto necesarias nuevas técnicas que permitan la protección contra fallos en los segmentos más populares. La complejidad de los diseños está encareciendo la validación "post-silicon". Su coste excede el de diseño, y el número de errores descubiertos está aumentando durante la validación y ya en manos de los clientes. La localización y el diagnóstico de errores son los mayores problemas, empeorados por las altas latencias en la manifestación de errores, por la poca observabilidad interna y por el coste de generar las señales esperadas. Esta tesis explora dos direcciones para tratar algunos de los retos causados por la creciente vulnerabilidad hardware y por las limitaciones de los enfoques de validación. Primero exploramos mecanismos para detectar múltiples fuentes de fallos durante el tiempo de vida de los procesadores (errores transitorios, intermitentes, permanentes y de diseño). Nuestras soluciones son de un paradigma donde la fiabilidad se construye explotando invariantes microarquitectónicos genéricos, en lugar de basarse en re-ejecución o en protección ad-hoc. Para ello descomponemos las funcionalidades básicas de un procesador y proponemos tres soluciones de `runtime verification' que combinadas permiten una detección de errores a nivel global. Estas tres soluciones son: un verificador de flujo de datos de registro y de computación, un verificador de flujo de datos de memoria y un verificador de flujo de control. Nuestras técnicas usan el concepto de firmas y permiten a los diseñadores ajustar los niveles de protección a sus necesidades, mediante compensaciones en área, consumo energético y rendimiento. Nuestros estudios de inyección de errores revelan que los métodos propuestos obtienen altos niveles de protección, a la vez que causan menos costes que las soluciones existentes. A continuación, esta tesis explora la aplicabilidad de estos esquemas a las fases de validación. Proponemos una solución de localización y diagnóstico de errores para el flujo de datos de memoria que combina nuestro mecanismo de detección de errores, junto con un mecanismo de logging de bajo coste y un programa de diagnóstico. Cierta actividad interna es continuamente registrada en una zona de memoria cuya capacidad puede ser expandida para satisfacer las necesidades de validación. La solución permite descubrir bugs, reduciendo la necesidad de calcular los resultados esperados. Al detectar un error, el algoritmo de diagnóstico analiza el registro para automáticamente localizar el bug y determinar su causa. Nuestros estudios muestran un alto grado de localización y de precisión de diagnóstico a un coste muy bajo de rendimiento y área. El resultado es una simplificación de las prácticas actuales de depuración, que son enormemente manuales, incómodas y largas. En conjunto, las soluciones de esta tesis capacitan a la industria a producir procesadores más fiables, a medida que la tecnología evoluciona hacia diseños más complejos y más vulnerables

Reliable Software for Unreliable Hardware - A Cross-Layer Approach

A novel cross-layer reliability analysis, modeling, and optimization approach is proposed in this thesis that leverages multiple layers in the system design abstraction (i.e. hardware, compiler, system software, and application program) to exploit the available reliability enhancing potential at each system layer and to exchange this information across multiple system layers

Approximate computing: An integrated cross-layer framework

A new design approach, called approximate computing (AxC), leverages the flexibility provided by intrinsic application resilience to realize hardware or software implementations that are more efficient in energy or performance. Approximate computing techniques forsake exact (numerical or Boolean) equivalence in the execution of some of the application’s computations, while ensuring that the output quality is acceptable. While early efforts in approximate computing have demonstrated great potential, they consist of ad hoc techniques applied to a very narrow set of applications, leaving in question the applicability of approximate computing in a broader context. The primary objective of this thesis is to develop an integrated cross-layer approach to approximate computing, and to thereby establish its applicability to a broader range of applications. The proposed framework comprises of three key components: (i) At the circuit level, systematic approaches to design approximate circuits, or circuits that realize a slightly modified function with improved efficiency, (ii) At the architecture level, utilize approximate circuits to build programmable approximate processors, and (iii) At the software level, methods to apply approximate computing to machine learning classifiers, which represent an important class of applications that are being utilized across the computing spectrum. Towards this end, the thesis extends the state-of-the-art in approximate computing in the following important directions. Synthesis of Approximate Circuits: First, the thesis proposes a rigorous framework for the automatic synthesis of approximate circuits , which are the hardware building blocks of approximate computing platforms. Designing approximate circuits involves making judicious changes to the function implemented by the circuit such that its hardware complexity is lowered without violating the specified quality constraint. Inspired by classical approaches to Boolean optimization in logic synthesis, the thesis proposes two synthesis tools called SALSA and SASIMI that are general, i.e., applicable to any given circuit and quality specification. The framework is further extended to automatically design quality configurable circuits , which are approximate circuits with the capability to reconfigure their quality at runtime. Over a wide range of arithmetic circuits, complex modules and complete datapaths, the circuits synthesized using the proposed framework demonstrate significant benefits in area and energy. Programmable AxC Processors: Next, the thesis extends approximate computing to the realm of programmable processors by introducing the concept of quality programmable processors (QPPs). A key principle of QPPs is that the notion of quality is explicitly codified in their HW/SW interface i.e., the instruction set. Instructions in the ISA are extended with quality fields, enabling software to specify the accuracy level that must be met during their execution. The micro-architecture is designed with hardware mechanisms to understand these quality specifications and translate them into energy savings. As a first embodiment of QPPs, the thesis presents a quality programmable 1D/2D vector processor QP-Vec, which contains a 3-tiered hierarchy of processing elements. Based on an implementation of QP-Vec with 289 processing elements, energy benefits up to 2.5X are demonstrated across a wide range of applications. Software and Algorithms for AxC: Finally, the thesis addresses the problem of applying approximate computing to an important class of applications viz. machine learning classifiers such as deep learning networks. To this end, the thesis proposes two approaches—AxNN and scalable effort classifiers. Both approaches leverage domain- specific insights to transform a given application to an energy-efficient approximate version that meets a specified application output quality. In the context of deep learning networks, AxNN adapts backpropagation to identify neurons that contribute less significantly to the network’s accuracy, approximating these neurons (e.g., by using lower precision), and incrementally re-training the network to mitigate the impact of approximations on output quality. On the other hand, scalable effort classifiers leverage the heterogeneity in the inherent classification difficulty of inputs to dynamically modulate the effort expended by machine learning classifiers. This is achieved by building a chain of classifiers of progressively growing complexity (and accuracy) such that the number of stages used for classification scale with input difficulty. Scalable effort classifiers yield substantial energy benefits as a majority of the inputs require very low effort in real-world datasets. In summary, the concepts and techniques presented in this thesis broaden the applicability of approximate computing, thus taking a significant step towards bringing approximate computing to the mainstream. (Abstract shortened by ProQuest.

Banked microarchitectures for complexity-effective superscalar microprocessors

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.Includes bibliographical references (p. 95-99).High performance superscalar microarchitectures exploit instruction-level parallelism (ILP) to improve processor performance by executing instructions out of program order and by speculating on branch instructions. Monolithic centralized structures with global communications, including issue windows and register files, are used to buffer in-flight instructions and to maintain machine state. These structures scale poorly to greater issue widths and deeper pipelines, as they must support simultaneous global accesses from all active instructions. The lack of scalability is exacerbated in future technologies, which have increasing global interconnect delay and a much greater emphasis on reducing both switching and leakage power. However, these fully orthogonal structures are over-engineered for typical use. Banked microarchitectures that consist of multiple interleaved banks of fewer ported cells can significantly reduce power, area, and latency of these structures.(cont.) Although banked structures exhibit a minor performance penalty, significant reductions in delay and power can potentially be used to increase clock rate and lead to more complexity-effective designs. There are two main contributions in this thesis. First, a speculative control scheme is proposed to simplify the complicated control logic that is involved in managing a less-ported banked register file for high-frequency superscalar processors. Second, the RingScalar architecture, a complexity-effective out-of-order superscalar microarchitecture, based on a ring topology of banked structures, is introduced and evaluated.by Jessica Hui-Chun Tseng.Ph.D

Microarchitectural Low-Power Design Techniques for Embedded Microprocessors

With the omnipresence of embedded processing in all forms of electronics today, there is a strong trend towards wireless, battery-powered, portable embedded systems which have to operate under stringent energy constraints. Consequently, low power consumption and high energy efficiency have emerged as the two key criteria for embedded microprocessor design. In this thesis we present a range of microarchitectural low-power design techniques which enable the increase of performance for embedded microprocessors and/or the reduction of energy consumption, e.g., through voltage scaling. In the context of cryptographic applications, we explore the effectiveness of instruction set extensions (ISEs) for a range of different cryptographic hash functions (SHA-3 candidates) on a 16-bit microcontroller architecture (PIC24). Specifically, we demonstrate the effectiveness of light-weight ISEs based on lookup table integration and microcoded instructions using finite state machines for operand and address generation. On-node processing in autonomous wireless sensor node devices requires deeply embedded cores with extremely low power consumption. To address this need, we present TamaRISC, a custom-designed ISA with a corresponding ultra-low-power microarchitecture implementation. The TamaRISC architecture is employed in conjunction with an ISE and standard cell memories to design a sub-threshold capable processor system targeted at compressed sensing applications. We furthermore employ TamaRISC in a hybrid SIMD/MIMD multi-core architecture targeted at moderate to high processing requirements (> 1 MOPS). A range of different microarchitectural techniques for efficient memory organization are presented. Specifically, we introduce a configurable data memory mapping technique for private and shared access, as well as instruction broadcast together with synchronized code execution based on checkpointing. We then study an inherent suboptimality due to the worst-case design principle in synchronous circuits, and introduce the concept of dynamic timing margins. We show that dynamic timing margins exist in microprocessor circuits, and that these margins are to a large extent state-dependent and that they are correlated to the sequences of instruction types which are executed within the processor pipeline. To perform this analysis we propose a circuit/processor characterization flow and tool called dynamic timing analysis. Moreover, this flow is employed in order to devise a high-level instruction set simulation environment for impact-evaluation of timing errors on application performance. The presented approach improves the state of the art significantly in terms of simulation accuracy through the use of statistical fault injection. The dynamic timing margins in microprocessors are then systematically exploited for throughput improvements or energy reductions via our proposed instruction-based dynamic clock adjustment (DCA) technique. To this end, we introduce a 6-stage 32-bit microprocessor with cycle-by-cycle DCA. Besides a comprehensive design flow and simulation environment for evaluation of the DCA approach, we additionally present a silicon prototype of a DCA-enabled OpenRISC microarchitecture fabricated in 28 nm FD-SOI CMOS. The test chip includes a suitable clock generation unit which allows for cycle-by-cycle DCA over a wide range with fine granularity at frequencies exceeding 1 GHz. Measurement results of speedups and power reductions are provided