LUXOR: An FPGA Logic Cell Architecture for Efficient Compressor Tree Implementations

We propose two tiers of modifications to FPGA logic cell architecture to deliver a variety of performance and utilization benefits with only minor area overheads. In the irst tier, we augment existing commercial logic cell datapaths with a 6-input XOR gate in order to improve the expressiveness of each element, while maintaining backward compatibility. This new architecture is vendor-agnostic, and we refer to it as LUXOR. We also consider a secondary tier of vendor-speciic modifications to both Xilinx and Intel FPGAs, which we refer to as X-LUXOR+ and I-LUXOR+ respectively. We demonstrate that compressor tree synthesis using generalized parallel counters (GPCs) is further improved with the proposed modifications. Using both the Intel adaptive logic module and the Xilinx slice at the 65nm technology node for a comparative study, it is shown that the silicon area overhead is less than 0.5% for LUXOR and 5-6% for LUXOR+, while the delay increments are 1-6% and 3-9% respectively. We demonstrate that LUXOR can deliver an average reduction of 13-19% in logic utilization on micro-benchmarks from a variety of domains.BNN benchmarks benefit the most with an average reduction of 37-47% in logic utilization, which is due to the highly-efficient mapping of the XnorPopcount operation on our proposed LUXOR+ logic cells.Comment: In Proceedings of the 2020 ACM/SIGDA International Symposium on Field-Programmable Gate Arrays (FPGA'20), February 23-25, 2020, Seaside, CA, US

Resource Optimal Squarers for FPGAs

International audienceSquaring is an essential operation in computer arithmetic that can be considered as a special case of multiplication where several simplifications can be applied to reduce the complexity of the resulting circuit. However, the design of a squarer is not straightforward for modern FPGAs that provide embedded DSP blocks and look-up-tables (LUTs). This work proposes a flexible method to design resource optimal squarers, i.e., a squarer that uses a minimum number of LUTs for a userdefined number of DSP blocks. The method uses an integer linear programming (ILP) formulation based on a generalization of multiplier tiling. It is shown that the proposed squarer design method significantly improves the LUT utilization for a given number of DSPs over previous methods, while maintaining a similar critical path delay and latency

LUT Based Generalized Parallel Counters for State-of-art FPGAs

Generalized Parallel Counters (GPCs) are frequently used in constructing high speed compressor trees. Previous work has focused on achieving efficient mapping of GPCs on FPGAs by using a combination of general Look-up table (LUT) fabric and specialized fast carry chains. The resulting structures are purely combinational and cannot be efficiently pipelined to achieve the potential FPGA performance. In this paper, we take an alternate approach and try to eliminate the fast carry chain from the GPC structure. We present a heuristic that maps GPCs on FPGAS using only general LUT fabric. The resultant GPCs are then easily re-timed by placing registers at the fan-out nodes of each LUT. We have used our heuristic on various GPCs reported in prior work. Our heuristic successfully eliminates the carry chain from the GPC structure with the same LUT count in most of the cases. Experimental results using Xilinx Kintex-7 FPGAs show a considerable reduction in critical path and dynamic power dissipation with same area utilization in most of the cases

Closing the Gap between FPGA and ASIC:Balancing Flexibility and Efficiency

Despite many advantages of Field-Programmable Gate Arrays (FPGAs), they fail to take over the IC design market from Application-Specific Integrated Circuits (ASICs) for high-volume and even medium-volume applications, as FPGAs come with significant cost in area, delay, and power consumption. There are two main reasons that FPGAs have huge efficiency gap with ASICs: (1) FPGAs are extremely flexible as they have fully programmable soft-logic blocks and routing networks, and (2) FPGAs have hard-logic blocks that are only usable by a subset of applications. In other words, current FPGAs have a heterogeneous structure comprised of the flexible soft-logic and the efficient hard-logic blocks that suffer from inefficiency and inflexibility, respectively. The inefficiency of the soft-logic is a challenge for any application that is mapped to FPGAs, and lack of flexibility in the hard-logic results in a waste of resources when an application cannot use the hard-logic. In this thesis, we approach the inefficiency problem of FPGAs by bridging the efficiency/flexibility gap of the hard- and soft-logic. The main goal of this thesis is to compromise on efficiency of the hard-logic for flexibility, on the one hand, and to compromise on flexibility of the soft-logic for efficiency, on the other hand. In other words, this thesis deals with two issues: (1) adding more generality to the hard-logic of FPGAs, and (2) improving the soft-logic by adapting it to the generic requirements of applications. In the first part of the thesis, we introduce new techniques that expand the functionality of FPGAs hard-logic. The hard-logic includes the dedicated resources that are tightly coupled with the soft-logic –i.e., adder circuitry and carry chains –as well as the stand-alone ones –i.e., DSP blocks. These specialized resources are intended to accelerate critical arithmetic operations that appear in the pre-synthesis representation of applications; we introduce mapping and architectural solutions, which enable both types of the hard-logic to support additional arithmetic operations. We first present a mapping technique that extends the application of FPGAs carry chains for carry-save arithmetic, and then to increase the generality of the hard-logic, we introduce novel architectures; using these architectures, more applications can take advantage of FPGAs hard-logic. In the second part of the thesis, we improve the efficiency of FPGAs soft-logic by exploiting the circuit patterns that emerge after logic synthesis, i.e., connection and logic patterns. Using these patterns, we design new soft-logic blocks that have less flexibility, but more efficiency than current ones. In this part, we first introduce logic chains, fixed connections that are integrated between the soft-logic blocks of FPGAs and are well-suited for long chains of logic that appear post-synthesis. Logic chains provide fast and low cost connectivity, increase the bandwidth of the logic blocks without changing their interface with the routing network, and improve the logic density of soft-logic blocks. In addition to logic chains and as a complementary contribution, we present a non-LUT soft-logic block that comprises simple and pre-connected cells. The structure of this logic block is inspired from the logic patterns that appear post-synthesis. This block has a complexity that is only linear in the number of inputs, it sports the potential for multiple independent outputs, and the delay is only logarithmic in the number of inputs. Although this new block is less flexible than a LUT, we show (1) that effective mapping algorithms exist, (2) that, due to their simplicity, poor utilization is less of an issue than with LUTs, and (3) that a few LUTs can still be used in extreme unfortunate cases. In summary, to bridge the gap between FPGAs and ASICs, we approach the problem from two complementary directions, which balance flexibility and efficiency of the logic blocks of FPGAs. However, we were able to explore a few design points in this thesis, and future work could focus on further exploration of the design space

Rethinking FPGA Architectures for Deep Neural Network applications

The prominence of machine learning-powered solutions instituted an unprecedented trend of integration into virtually all applications with a broad range of deployment constraints from tiny embedded systems to large-scale warehouse computing machines. While recent research confirms the edges of using contemporary FPGAs to deploy or accelerate machine learning applications, especially where the latency and energy consumption are strictly limited, their pre-machine learning optimised architectures remain a barrier to the overall efficiency and performance. Realizing this shortcoming, this thesis demonstrates an architectural study aiming at solutions that enable hidden potentials in the FPGA technology, primarily for machine learning algorithms. Particularly, it shows how slight alterations to the state-of-the-art architectures could significantly enhance the FPGAs toward becoming more machine learning-friendly while maintaining the near-promised performance for the rest of the applications. Eventually, it presents a novel systematic approach to deriving new block architectures guided by designing limitations and machine learning algorithm characteristics through benchmarking. First, through three modifications to Xilinx DSP48E2 blocks, an enhanced digital signal processing (DSP) block for important computations in embedded deep neural network (DNN) accelerators is described. Then, two tiers of modifications to FPGA logic cell architecture are explained that deliver a variety of performance and utilisation benefits with only minor area overheads. Eventually, with the goal of exploring this new design space in a methodical manner, a problem formulation involving computing nested loops over multiply-accumulate (MAC) operations is first proposed. A quantitative methodology for deriving efficient coarse-grained compute block architectures from benchmarks is then suggested together with a family of new embedded blocks, called MLBlocks

Técnicas de compresión de imágenes hiperespectrales sobre hardware reconfigurable

Tesis de la Universidad Complutense de Madrid, Facultad de Informática, leída el 18-12-2020Sensors are nowadays in all aspects of human life. When possible, sensors are used remotely. This is less intrusive, avoids interferces in the measuring process, and more convenient for the scientist. One of the most recurrent concerns in the last decades has been sustainability of the planet, and how the changes it is facing can be monitored. Remote sensing of the earth has seen an explosion in activity, with satellites now being launched on a weekly basis to perform remote analysis of the earth, and planes surveying vast areas for closer analysis...Los sensores aparecen hoy en día en todos los aspectos de nuestra vida. Cuando es posible, de manera remota. Esto es menos intrusivo, evita interferencias en el proceso de medida, y además facilita el trabajo científico. Una de las preocupaciones recurrentes en las últimas décadas ha sido la sotenibilidad del planeta, y cómo menitoirzar los cambios a los que se enfrenta. Los estudios remotos de la tierra han visto un gran crecimiento, con satélites lanzados semanalmente para analizar la superficie, y aviones sobrevolando grades áreas para análisis más precisos...Fac. de InformáticaTRUEunpu

Uso eficiente de aritmética redundante en FPGAs

Hasta hace pocos años, la utilización de aritmética redundante en FPGAs había sido descartada por dos razones principalmente. En primer lugar, por el buen rendimiento que ofrecían los sumadores de acarreo propagado, gracias a la lógica de de acarreo que poseían de fábrica y al pequeño tamaño de los operandos en las aplicaciones típicas para FPGAs. En segundo lugar, el excesivo consumo de área que las herramientas de síntesis obtenían cuando mapeaban unidades que trabajan en carrysave. En este trabajo, se muestra que es posible la utilización de aritmética redundante carry-save en FPGAs de manera eficiente, consiguiendo un aumento en la velocidad de operación con un consumo de recursos razonable. Se ha introducido un nuevo formato redundante doble carry-save y se ha demostrado que la manera óptima para la realización de multiplicadores de elevado ancho de palabra es la combinación de multiplicadores empotrados con sumadores carry-save.Till a few years ago, redundant arithmetic had been discarded to be use in FPGA mainly for two reasons. First, the efficient results obtained using carry-propagate adders thanks to the carry-logic embedded in FPGAs and the small sizes of operands in typical FPGA applications. Second, the high number of resources that the synthesis tools utilizes to implement carry-save circuits. In this work, it is demonstrated that carry-save arithmetic can be efficiently used in FPGA, obtaining an important speed improvement with a reasonable area cost. A new redundant format, double carry-save, has been introduced, and the optimal implementation of large size multipliers has been shown based on embedded multipliers and carry-save adders

Efficient reconfigurable architectures for 3D medical image compression

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Recently, the more widespread use of three-dimensional (3-D) imaging modalities, such as magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography (PET), and ultrasound (US) have generated a massive amount of volumetric data. These have provided an impetus to the development of other applications, in particular telemedicine and teleradiology. In these fields, medical image compression is important since both efficient storage and transmission of data through high-bandwidth digital communication lines are of crucial importance. Despite their advantages, most 3-D medical imaging algorithms are computationally intensive with matrix transformation as the most fundamental operation involved in the transform-based methods. Therefore, there is a real need for high-performance systems, whilst keeping architectures exible to allow for quick upgradeability with real-time applications. Moreover, in order to obtain efficient solutions for large medical volumes data, an efficient implementation of these operations is of significant importance. Reconfigurable hardware, in the form of field programmable gate arrays (FPGAs) has been proposed as viable system building block in the construction of high-performance systems at an economical price. Consequently, FPGAs seem an ideal candidate to harness and exploit their inherent advantages such as massive parallelism capabilities, multimillion gate counts, and special low-power packages. The key achievements of the work presented in this thesis are summarised as follows. Two architectures for 3-D Haar wavelet transform (HWT) have been proposed based on transpose-based computation and partial reconfiguration suitable for 3-D medical imaging applications. These applications require continuous hardware servicing, and as a result dynamic partial reconfiguration (DPR) has been introduced. Comparative study for both non-partial and partial reconfiguration implementation has shown that DPR offers many advantages and leads to a compelling solution for implementing computationally intensive applications such as 3-D medical image compression. Using DPR, several large systems are mapped to small hardware resources, and the area, power consumption as well as maximum frequency are optimised and improved. Moreover, an FPGA-based architecture of the finite Radon transform (FRAT)with three design strategies has been proposed: direct implementation of pseudo-code with a sequential or pipelined description, and block random access memory (BRAM)- based method. An analysis with various medical imaging modalities has been carried out. Results obtained for image de-noising implementation using FRAT exhibits promising results in reducing Gaussian white noise in medical images. In terms of hardware implementation, promising trade-offs on maximum frequency, throughput and area are also achieved. Furthermore, a novel hardware implementation of 3-D medical image compression system with context-based adaptive variable length coding (CAVLC) has been proposed. An evaluation of the 3-D integer transform (IT) and the discrete wavelet transform (DWT) with lifting scheme (LS) for transform blocks reveal that 3-D IT demonstrates better computational complexity than the 3-D DWT, whilst the 3-D DWT with LS exhibits a lossless compression that is significantly useful for medical image compression. Additionally, an architecture of CAVLC that is capable of compressing high-definition (HD) images in real-time without any buffer between the quantiser and the entropy coder is proposed. Through a judicious parallelisation, promising results have been obtained with limited resources. In summary, this research is tackling the issues of massive 3-D medical volumes data that requires compression as well as hardware implementation to accelerate the slowest operations in the system. Results obtained also reveal a significant achievement in terms of the architecture efficiency and applications performance.Ministry of Higher Education Malaysia (MOHE), Universiti Tun Hussein Onn Malaysia (UTHM) and the British Counci