Spatial parallelism in the routers of asynchronous on-chip networks

State-of-the-art multi-processor systems-on-chip use on-chip networks as their communication fabric. Although most on-chip networks are implemented synchronously, asynchronous on-chip networks have several advantages over their synchronous counterparts. Timing division multiplexing (TDM) flow control methods have been utilized in asynchronous on-chip networks extensively. The synchronization required by TDM leads to significant speed penalties. Compared with using TDM methods, spatial parallelism methods, such as the spatial division multiplexing (SDM) flow control method, achieve better network throughput with less area overhead.This thesis proposes several techniques to increase spatial parallelism in the routers of asynchronous on-chip networks.Channel slicing is a new pipeline structure that alleviates the speed penalty by removing the synchronization among bit-level data pipelines. It is also found out that the lookahead pipeline using early evaluated acknowledgement can be used in routers to further improve speed.SDM is a new flow control method proposed for asynchronous on-chip networks. It improves network throughput without introducing synchronization among buffers of different frames, which is required by TDM methods. It is also found that the area overhead of SDM is smaller than the virtual channel (VC) flow control method -- the most used TDM method. The major design problem of SDM is the area consuming crossbars. A novel 2-stage Clos switch structure is proposed to replace the crossbar in SDM routers, which significantly reduces the area overhead. This Clos switch is dynamically reconfigured by a new asynchronous Clos scheduler.Several asynchronous SDM routers are implemented using these new techniques. An asynchronous VC router is also reproduced for comparison. Performance analyses show that the SDM routers outperform the VC router in throughput, area overhead and energy efficiency.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

FPGA structures for high speed and low overhead dynamic circuit specialization

A Field Programmable Gate Array (FPGA) is a programmable digital electronic chip. The FPGA does not come with a predefined function from the manufacturer; instead, the developer has to define its function through implementing a digital circuit on the FPGA resources. The functionality of the FPGA can be reprogrammed as desired and hence the name “field programmable”. FPGAs are useful in small volume digital electronic products as the design of a digital custom chip is expensive. Changing the FPGA (also called configuring it) is done by changing the configuration data (in the form of bitstreams) that defines the FPGA functionality. These bitstreams are stored in a memory of the FPGA called configuration memory. The SRAM cells of LookUp Tables (LUTs), Block Random Access Memories (BRAMs) and DSP blocks together form the configuration memory of an FPGA. The configuration data can be modified according to the user’s needs to implement the user-defined hardware. The simplest way to program the configuration memory is to download the bitstreams using a JTAG interface. However, modern techniques such as Partial Reconfiguration (PR) enable us to configure a part in the configuration memory with partial bitstreams during run-time. The reconfiguration is achieved by swapping in partial bitstreams into the configuration memory via a configuration interface called Internal Configuration Access Port (ICAP). The ICAP is a hardware primitive (macro) present in the FPGA used to access the configuration memory internally by an embedded processor. The reconfiguration technique adds flexibility to use specialized ci rcuits that are more compact and more efficient t han t heir b ulky c ounterparts. An example of such an implementation is the use of specialized multipliers instead of big generic multipliers in an FIR implementation with constant coefficients. To specialize these circuits and reconfigure during the run-time, researchers at the HES group proposed the novel technique called parameterized reconfiguration that can be used to efficiently and automatically implement Dynamic Circuit Specialization (DCS) that is built on top of the Partial Reconfiguration method. It uses the run-time reconfiguration technique that is tailored to implement a parameterized design. An application is said to be parameterized if some of its input values change much less frequently than the rest. These inputs are called parameters. Instead of implementing these parameters as regular inputs, in DCS these inputs are implemented as constants, and the application is optimized for the constants. For every change in parameter values, the design is re-optimized (specialized) during run-time and implemented by reconfiguring the optimized design for a new set of parameters. In DCS, the bitstreams of the parameterized design are expressed as Boolean functions of the parameters. For every infrequent change in parameters, a specialized FPGA configuration is generated by evaluating the corresponding Boolean functions, and the FPGA is reconfigured with the specialized configuration. A detailed study of overheads of DCS and providing suitable solutions with appropriate custom FPGA structures is the primary goal of the dissertation. I also suggest different improvements to the FPGA configuration memory architecture. After offering the custom FPGA structures, I investigated the role of DCS on FPGA overlays and the use of custom FPGA structures that help to reduce the overheads of DCS on FPGA overlays. By doing so, I hope I can convince the developer to use DCS (which now comes with minimal costs) in real-world applications. I start the investigations of overheads of DCS by implementing an adaptive FIR filter (using the DCS technique) on three different Xilinx FPGA platforms: Virtex-II Pro, Virtex-5, and Zynq-SoC. The study of how DCS behaves and what is its overhead in the evolution of the three FPGA platforms is the non-trivial basis to discover the costs of DCS. After that, I propose custom FPGA structures (reconfiguration controllers and reconfiguration drivers) to reduce the main overhead (reconfiguration time) of DCS. These structures not only reduce the reconfiguration time but also help curbing the power hungry part of the DCS system. After these chapters, I study the role of DCS on FPGA overlays. I investigate the effect of the proposed FPGA structures on Virtual-Coarse-Grained Reconfigurable Arrays (VCGRAs). I classify the VCGRA implementations into three types: the conventional VCGRA, partially parameterized VCGRA and fully parameterized VCGRA depending upon the level of parameterization. I have designed two variants of VCGRA grids for HPC image processing applications, namely, the MAC grid and Pixie. Finally, I try to tackle the reconfiguration time overhead at the hardware level of the FPGA by customizing the FPGA configuration memory architecture. In this part of my research, I propose to use a parallel memory structure to improve the reconfiguration time of DCS drastically. However, this improvement comes with a significant overhead of hardware resources which will need to be solved in future research on commercial FPGA configuration memory architectures

Erreichen von Performance in Netzwerken-On-Chip für Echtzeitsysteme

In many new applications, such as in automatic driving, high performance requirements have reached safety critical real-time systems. Consequently, Networks-on-Chip (NoCs) must efficiently host new sets of highly dynamic workloads e.g., high resolution sensor fusion and data processing, autonomous decision’s making combined with machine learning. The static platform management, as used in current safety critical systems, is no more sufficient to provide the needed level of service. A dynamic platform management could meet the challenge, but it usually suffers from a lack of predictability and the simplicity necessary for certification of safety and real-time properties. In this work, we propose a novel, global and dynamic arbitration for NoCs with real-time QoS requirements. The mechanism decouples the admission control from arbitration in routers thereby simplifying a dynamic adaptation and real-time analysis. Consequently, the proposed solution allows the deployment of a sophisticated contract-based QoS provisioning without introducing complicated and hard to maintain schemes, known from the frequently applied static arbiters. The presented work introduces an overlay network to synchronize transmissions using arbitration units called Resource Managers (RMs), which allows global and work-conserving scheduling. The description of resource allocation strategies is supplemented by protocol design and verification methodology bringing adaptive control to NoC communication in setups with different QoS requirements and traffic classes. For doing that, a formal worst-case timing analysis for the mechanism has been proposed which demonstrates that this solution not only exposes higher performance in simulation but, even more importantly, consistently reaches smaller formally guaranteed worst-case latencies than other strategies for realistic levels of system's utilization. The approach is not limited to a specific network architecture or topology as the mechanism does not require modifications of routers and therefore can be used together with the majority of existing manycore systems. Indeed, the evaluation followed using the generic performance optimized router designs, as well as two systems-on-chip focused on real-time deployments. The results confirmed that the proposed approach proves to exhibit significantly higher average performance in simulation and execution.In vielen neuen sicherheitskritische Anwendungen, wie z.B. dem automatisierten Fahren, werden große Anforderungen an die Leistung von Echtzeitsysteme gestellt. Daher müssen Networks-on-Chip (NoCs) neue, hochdynamische Workloads wie z.B. hochauflösende Sensorfusion und Datenverarbeitung oder autonome Entscheidungsfindung kombiniert mit maschineller Lernen, effizient auf einem System unterbringen. Die Steuerung der zugrunde liegenden NoC-Architektur, muss die Systemsicherheit vor Fehlern, resultierend aus dem dynamischen Verhalten des Systems schützen und gleichzeitig die geforderte Performance bereitstellen. In dieser Arbeit schlagen wir eine neuartige, globale und dynamische Steuerung für NoCs mit Echtzeit QoS Anforderungen vor. Das Schema entkoppelt die Zutrittskontrolle von der Arbitrierung in Routern. Hierdurch wird eine dynamische Anpassung ermöglicht und die Echtzeitanalyse vereinfacht. Der Einsatz einer ausgefeilten vertragsbasierten Ressourcen-Zuweisung wird so ermöglicht, ohne komplexe und schwer wartbare Mechanismen, welche bereits aus dem statischen Plattformmanagement bekannt sind einzuführen. Diese Arbeit stellt ein übergelagertes Netzwerk vor, welches Übertragungen mit Hilfe von Arbitrierungseinheiten, den so genannten Resource Managern (RMs), synchronisiert. Dieses überlagerte Netzwerk ermöglicht eine globale und lasterhaltende Steuerung. Die Beschreibung verschiedener Ressourcenzuweisungstrategien wird ergänzt durch ein Protokolldesign und Methoden zur Verifikation der adaptiven NoC Steuerung mit unterschiedlichen QoS Anforderungen und Verkehrsklassen. Hierfür wird eine formale Worst Case Timing Analyse präsentiert, welche das vorgestellte Verfahren abbildet. Die Resultate bestätitgen, dass die präsentierte Lösung nicht nur eine höhere Performance in der Simulation bietet, sondern auch formal kleinere Worst-Case Latenzen für realistische Systemauslastungen als andere Strategien garantiert. Der vorgestellte Ansatz ist nicht auf eine bestimmte Netzwerkarchitektur oder Topologie beschränkt, da der Mechanismus keine Änderungen an den unterliegenden Routern erfordert und kann daher zusammen mit bestehenden Manycore-Systemen eingesetzt werden. Die Evaluierung erfolgte auf Basis eines leistungsoptimierten Router-Designs sowie zwei auf Echtzeit-Anwendungen fokusierten Platformen. Die Ergebnisse bestätigten, dass der vorgeschlagene Ansatz im Durchschnitt eine deutlich höhere Leistung in der Simulation und Ausführung liefert

Efficient Interconnection Network Design for Heterogeneous Architectures

The onset of big data and deep learning applications, mixed with conventional general-purpose programs, have driven computer architecture to embrace heterogeneity with specialization. With the ever-increasing interconnected chip components, future architectures are required to operate under a stricter power budget and process emerging big data applications efficiently. Interconnection network as the communication backbone thus is facing the grand challenges of limited power envelope, data movement and performance scaling. This dissertation provides interconnect solutions that are specialized to application requirements towards power-/energy-efficient and high-performance computing for heterogeneous architectures. This dissertation examines the challenges of network-on-chip router power-gating techniques for general-purpose workloads to save static power. A voting approach is proposed as an adaptive power-gating policy that considers both local and global traffic status through router voting. In addition, low-latency routing algorithms are designed to guarantee performance in irregular power-gating networks. This holistic solution not only saves power but also avoids performance overhead. This research also introduces emerging computation paradigms to interconnects for big data applications to mitigate the pressure of data movement. Approximate network-on-chip is proposed to achieve high-throughput communication by means of lossy compression. Then, near-data processing is combined with in-network computing to further improve performance while reducing data movement. The two schemes are general to play as plug-ins for different network topologies and routing algorithms. To tackle the challenging computational requirements of deep learning workloads, this dissertation investigates the compelling opportunities of communication algorithm-architecture co-design to accelerate distributed deep learning. MultiTree allreduce algorithm is proposed to bond with message scheduling with network topology to achieve faster and contention-free communication. In addition, the interconnect hardware and flow control are also specialized to exploit deep learning communication characteristics and fulfill the algorithm needs, thereby effectively improving the performance and scalability. By considering application and algorithm characteristics, this research shows that interconnection network can be tailored accordingly to improve the power-/energy-efficiency and performance to satisfy heterogeneous computation and communication requirements

Software-based and regionally-oriented traffic management in Networks-on-Chip

Since the introduction of chip-multiprocessor systems, the number of integrated cores has been steady growing and workload applications have been adapted to exploit the increasing parallelism. This changed the importance of efficient on-chip communication significantly and the infrastructure has to keep step with these new requirements. The work at hand makes significant contributions to the state-of-the-art of the latest generation of such solutions, called Networks-on-Chip, to improve the performance, reliability, and flexible management of these on-chip infrastructures

Run-time management for future MPSoC platforms

In recent years, we are witnessing the dawning of the Multi-Processor Systemon- Chip (MPSoC) era. In essence, this era is triggered by the need to handle more complex applications, while reducing overall cost of embedded (handheld) devices. This cost will mainly be determined by the cost of the hardware platform and the cost of designing applications for that platform. The cost of a hardware platform will partly depend on its production volume. In turn, this means that ??exible, (easily) programmable multi-purpose platforms will exhibit a lower cost. A multi-purpose platform not only requires ??exibility, but should also combine a high performance with a low power consumption. To this end, MPSoC devices integrate computer architectural properties of various computing domains. Just like large-scale parallel and distributed systems, they contain multiple heterogeneous processing elements interconnected by a scalable, network-like structure. This helps in achieving scalable high performance. As in most mobile or portable embedded systems, there is a need for low-power operation and real-time behavior. The cost of designing applications is equally important. Indeed, the actual value of future MPSoC devices is not contained within the embedded multiprocessor IC, but in their capability to provide the user of the device with an amount of services or experiences. So from an application viewpoint, MPSoCs are designed to ef??ciently process multimedia content in applications like video players, video conferencing, 3D gaming, augmented reality, etc. Such applications typically require a lot of processing power and a signi??cant amount of memory. To keep up with ever evolving user needs and with new application standards appearing at a fast pace, MPSoC platforms need to be be easily programmable. Application scalability, i.e. the ability to use just enough platform resources according to the user requirements and with respect to the device capabilities is also an important factor. Hence scalability, ??exibility, real-time behavior, a high performance, a low power consumption and, ??nally, programmability are key components in realizing the success of MPSoC platforms. The run-time manager is logically located between the application layer en the platform layer. It has a crucial role in realizing these MPSoC requirements. As it abstracts the platform hardware, it improves platform programmability. By deciding on resource assignment at run-time and based on the performance requirements of the user, the needs of the application and the capabilities of the platform, it contributes to ??exibility, scalability and to low power operation. As it has an arbiter function between different applications, it enables real-time behavior. This thesis details the key components of such an MPSoC run-time manager and provides a proof-of-concept implementation. These key components include application quality management algorithms linked to MPSoC resource management mechanisms and policies, adapted to the provided MPSoC platform services. First, we describe the role, the responsibilities and the boundary conditions of an MPSoC run-time manager in a generic way. This includes a de??nition of the multiprocessor run-time management design space, a description of the run-time manager design trade-offs and a brief discussion on how these trade-offs affect the key MPSoC requirements. This design space de??nition and the trade-offs are illustrated based on ongoing research and on existing commercial and academic multiprocessor run-time management solutions. Consequently, we introduce a fast and ef??cient resource allocation heuristic that considers FPGA fabric properties such as fragmentation. In addition, this thesis introduces a novel task assignment algorithm for handling soft IP cores denoted as hierarchical con??guration. Hierarchical con??guration managed by the run-time manager enables easier application design and increases the run-time spatial mapping freedom. In turn, this improves the performance of the resource assignment algorithm. Furthermore, we introduce run-time task migration components. We detail a new run-time task migration policy closely coupled to the run-time resource assignment algorithm. In addition to detailing a design-environment supported mechanism that enables moving tasks between an ISP and ??ne-grained recon??gurable hardware, we also propose two novel task migration mechanisms tailored to the Network-on-Chip environment. Finally, we propose a novel mechanism for task migration initiation, based on reusing debug registers in modern embedded microprocessors. We propose a reactive on-chip communication management mechanism. We show that by exploiting an injection rate control mechanism it is possible to provide a communication management system capable of providing a soft (reactive) QoS in a NoC. We introduce a novel, platform independent run-time algorithm to perform quality management, i.e. to select an application quality operating point at run-time based on the user requirements and the available platform resources, as reported by the resource manager. This contribution also proposes a novel way to manage the interaction between the quality manager and the resource manager. In order to have a the realistic, reproducible and ??exible run-time manager testbench with respect to applications with multiple quality levels and implementation tradev offs, we have created an input data generation tool denoted Pareto Surfaces For Free (PSFF). The the PSFF tool is, to the best of our knowledge, the ??rst tool that generates multiple realistic application operating points either based on pro??ling information of a real-life application or based on a designer-controlled random generator. Finally, we provide a proof-of-concept demonstrator that combines these concepts and shows how these mechanisms and policies can operate for real-life situations. In addition, we show that the proposed solutions can be integrated into existing platform operating systems