430 research outputs found
Indoor off-body wireless communication: static beamforming versus space-time coding
The performance of beamforming versus space-time coding using a body-worn textile antenna array is experimentally evaluated for an indoor environment, where a walking rescue worker transmits data in the 2.45 GHz ISM band, relying on a vertical textile four-antenna array integrated into his garment. The two transmission scenarios considered are static beamforming at low-elevation angles and space-time code based transmit diversity. Signals are received by a base station equipped with a horizontal array of four dipole antennas providing spatial receive diversity through maximum-ratio combining. Signal-to-noise ratios, bit error rate characteristics, and signal correlation properties are assessed for both off-body transmission scenarios. Without receiver diversity, the performance of space-time coding is generally better. In case of fourth-order receiver diversity, beamforming is superior in line-of-sight conditions. For non-line-of-sight propagation, the space-time codes perform better as soon as bit error rates are low enough for a reliable data link
State-of-the-art assessment of 5G mmWave communications
Deliverable D2.1 del proyecto 5GWirelessMain objective of the European 5Gwireless project, which is part of the H2020 Marie Slodowska-
Curie ITN (Innovative Training Networks) program resides in the training and involvement of young
researchers in the elaboration of future mobile communication networks, focusing on innovative
wireless technologies, heterogeneous network architectures, new topologies (including ultra-dense
deployments), and appropriate tools. The present Document D2.1 is the first deliverable of Work-
Package 2 (WP2) that is specifically devoted to the modeling of the millimeter-wave (mmWave)
propagation channels, and development of appropriate mmWave beamforming and signal
processing techniques. Deliver D2.1 gives a state-of-the-art on the mmWave channel measurement,
characterization and modeling; existing antenna array technologies, channel estimation and
precoding algorithms; proposed deployment and networking techniques; some performance
studies; as well as a review on the evaluation and analysis toolsPostprint (published version
Nuts and Bolts of a Realistic Stochastic Geometric Analysis of mmWave HetNets: Hardware Impairments and Channel Aging
© 2019 IEEE.Motivated by heterogeneous network (HetNet) design in improving coverage and by millimeter-wave (mmWave) transmission offering an abundance of extra spectrum, we present a general analytical framework shedding light on the downlink of realistic mmWave HetNets consisting of K tiers of randomly located base stations. Specifically, we model, by virtue of stochastic geometry tools, the multi-Tier multi-user (MU) multiple-input multiple-output (MIMO) mmWave network degraded by the inevitable residual additive transceiver hardware impairments (RATHIs) and channel aging. Given this setting, we derive the coverage probability and the area spectral efficiency (ASE), and we subsequently evaluate the impact of residual transceiver hardware impairments and channel aging on these metrics. Different path-loss laws for line-of-sight and non-line-of-sight are accounted for the analysis, which are among the distinguishing features of mmWave systems. Among the findings, we show that the RATHIs have a meaningful impact at the high-signal-To-noise-ratio regime, while the transmit additive distortion degrades further than the receive distortion the system performance. Moreover, serving fewer users proves to be preferable, and the more directive the mmWaves are, the higher the ASE becomes.Peer reviewedFinal Accepted Versio
Ondas milimétricas e MIMO massivo para otimização da capacidade e cobertura de redes heterogeneas de 5G
Today's Long Term Evolution Advanced (LTE-A) networks cannot support
the exponential growth in mobile traffic forecast for the next decade. By
2020, according to Ericsson, 6 billion mobile subscribers worldwide are projected
to generate 46 exabytes of mobile data traffic monthly from 24 billion
connected devices, smartphones and short-range Internet of Things (IoT)
devices being the key prosumers. In response, 5G networks are foreseen
to markedly outperform legacy 4G systems. Triggered by the International
Telecommunication Union (ITU) under the IMT-2020 network initiative, 5G
will support three broad categories of use cases: enhanced mobile broadband
(eMBB) for multi-Gbps data rate applications; ultra-reliable and low latency
communications (URLLC) for critical scenarios; and massive machine
type communications (mMTC) for massive connectivity. Among the several
technology enablers being explored for 5G, millimeter-wave (mmWave)
communication, massive MIMO antenna arrays and ultra-dense small cell
networks (UDNs) feature as the dominant technologies. These technologies
in synergy are anticipated to provide the 1000_ capacity increase for 5G
networks (relative to 4G) through the combined impact of large additional
bandwidth, spectral efficiency (SE) enhancement and high frequency reuse,
respectively. However, although these technologies can pave the way towards
gigabit wireless, there are still several challenges to solve in terms of
how we can fully harness the available bandwidth efficiently through appropriate
beamforming and channel modeling approaches. In this thesis, we
investigate the system performance enhancements realizable with mmWave
massive MIMO in 5G UDN and cellular infrastructure-to-everything (C-I2X)
application scenarios involving pedestrian and vehicular users. As a critical
component of the system-level simulation approach adopted in this thesis,
we implemented 3D channel models for the accurate characterization of the
wireless channels in these scenarios and for realistic performance evaluation.
To address the hardware cost, complexity and power consumption of the
massive MIMO architectures, we propose a novel generalized framework for
hybrid beamforming (HBF) array structures. The generalized model reveals
the opportunities that can be harnessed with the overlapped subarray structures
for a balanced trade-o_ between SE and energy efficiently (EE) of 5G
networks. The key results in this investigation show that mmWave massive
MIMO can deliver multi-Gbps rates for 5G whilst maintaining energy-efficient operation of the network.As redes LTE-A atuais não são capazes de suportar o crescimento exponencial
de tráfego que está previsto para a próxima década. De acordo
com a previsão da Ericsson, espera-se que em 2020, a nÃvel global, 6 mil
milhões de subscritores venham a gerar mensalmente 46 exa bytes de tráfego
de dados a partir de 24 mil milhões de dispositivos ligados à rede móvel,
sendo os telefones inteligentes e dispositivos IoT de curto alcance os principais
responsáveis por tal nÃvel de tráfego. Em resposta a esta exigência,
espera-se que as redes de 5a geração (5G) tenham um desempenho substancialmente
superior às redes de 4a geração (4G) atuais. Desencadeado pelo
UIT (União Internacional das Telecomunicações) no âmbito da iniciativa
IMT-2020, o 5G irá suportar três grandes tipos de utilizações: banda larga
móvel capaz de suportar aplicações com débitos na ordem de vários Gbps;
comunicações de baixa latência e alta fiabilidade indispensáveis em cenários
de emergência; comunicações massivas máquina-a-máquina para conectividade
generalizada. Entre as várias tecnologias capacitadoras que estão a ser
exploradas pelo 5G, as comunicações através de ondas milimétricas, os agregados
MIMO massivo e as redes celulares ultradensas (RUD) apresentam-se
como sendo as tecnologias fundamentais. Antecipa-se que o conjunto
destas tecnologias venha a fornecer às redes 5G um aumento de capacidade
de 1000x através da utilização de maiores larguras de banda, melhoria da
eficiência espectral, e elevada reutilização de frequências respetivamente.
Embora estas tecnologias possam abrir caminho para as redes sem fios
com débitos na ordem dos gigabits, existem ainda vários desafios que têm
que ser resolvidos para que seja possÃvel aproveitar totalmente a largura de
banda disponÃvel de maneira eficiente utilizando abordagens de formatação
de feixe e de modelação de canal adequadas. Nesta tese investigamos a
melhoria de desempenho do sistema conseguida através da utilização de
ondas milimétricas e agregados MIMO massivo em cenários de redes celulares
ultradensas de 5a geração e em cenários 'infraestrutura celular-para-qualquer
coisa' (do inglês: cellular infrastructure-to-everything) envolvendo
utilizadores pedestres e veiculares. Como um componente fundamental das
simulações de sistema utilizadas nesta tese é o canal de propagação, implementamos modelos de canal tridimensional (3D) para caracterizar de
forma precisa o canal de propagação nestes cenários e assim conseguir uma
avaliação de desempenho mais condizente com a realidade. Para resolver os
problemas associados ao custo do equipamento, complexidade e consumo
de energia das arquiteturas MIMO massivo, propomos um modelo inovador
de agregados com formatação de feixe hÃbrida. Este modelo genérico revela
as oportunidades que podem ser aproveitadas através da sobreposição
de sub-agregados no sentido de obter um compromisso equilibrado entre
eficiência espectral (ES) e eficiência energética (EE) nas redes 5G. Os principais
resultados desta investigação mostram que a utilização conjunta de
ondas milimétricas e de agregados MIMO massivo possibilita a obtenção, em
simultâneo, de taxas de transmissão na ordem de vários Gbps e a operação
de rede de forma energeticamente eficiente.Programa Doutoral em Telecomunicaçõe
Doctoral Thesis: Massive MIMO in Real Propagation Environments
Mobile communications are now evolving towards the fifth generation (5G). In the near future, we expect an explosive increase in the number of connected devices, such as phones, tablets, sensors, connected vehicles and so on. Much higher data rates than in today's 4G systems are required. In the 5G visions, better coverage in remote regions is also included, aiming for bringing the current "4 billion unconnected" population into the online world. There is also a great interest in "green communications", for less energy consumption in the ICT (information and communication technology) industry. Massive MIMO is a potential technology to fulfill the requirements and visions. By equipping a base station with a large number, say tens to hundreds, of antennas, many terminals can be served in the same time-frequency resource without severe inter-user interference. Through "aggressive" spatial multiplexing, higher data rates can be achieved without increasing the required spectrum. Processing efforts can be made at the base station side, allowing terminals to have simple and cheap hardware. By exploiting the many spatial degrees of freedom, linear precoding/detection schemes can be used to achieve near-optimal performance. The large number of antennas also brings the advantage of large array gain, resulting in an increase in received signal strength. Better coverage is thus achieved. On the other hand, transmit power from base stations and terminals can be scaled down to pursue energy efficiency. In the last five years, a lot of theoretical studies have been done, showing the extraordinary advantages of massive MIMO. However, the investigations are mainly based on theoretical channels with independent and identically distributed (i.i.d.) Gaussian coefficients, and sometimes assuming unlimited number of antennas. When bringing this new technology from theory to practice, it is important to understand massive MIMO behavior in real propagation channels using practical antenna arrays. Not much has been known about real massive MIMO channels, and whether the claims about massive MIMO still hold there, until the studies in this thesis were done. The thesis study connects the "ideal" world of theory to the "non-ideal" reality. Channel measurements for massive MIMO in the 2.6 GHz band were performed, in different propagation environments and using different types of antenna arrays. Based on obtained real-life channel data, the studies include • channel characterization to identify important massive MIMO properties, • evaluation of propagation conditions in real channels and corresponding massive MIMO performance, • channel modeling for massive MIMO to capture the identified channel properties, and • reduction of massive MIMO hardware complexity through antenna selection. The investigations in the thesis conclude that massive MIMO works efficiently in real propagation environments. The theoretical advantages, as observed in i.i.d. Rayleigh channels, can also be harvested in real channels. Important propagation effects are identified for massive MIMO scenarios, including channel variations over large arrays, multipath-component (MPC) lifetime, and 3D propagation. These propagation properties are modeled and included into the COST 2100 MIMO channel model as an extension for massive MIMO. The study on antenna selection shows that characteristics in real channels allow for significant reductions of massive MIMO complexity without significant performance loss. As one of the world's first research work on massive MIMO behavior in real propagation channels, the studies in this thesis promote massive MIMO as a practical technology for future communication systems
Millimeter-wave Evolution for 5G Cellular Networks
Triggered by the explosion of mobile traffic, 5G (5th Generation) cellular
network requires evolution to increase the system rate 1000 times higher than
the current systems in 10 years. Motivated by this common problem, there are
several studies to integrate mm-wave access into current cellular networks as
multi-band heterogeneous networks to exploit the ultra-wideband aspect of the
mm-wave band. The authors of this paper have proposed comprehensive
architecture of cellular networks with mm-wave access, where mm-wave small cell
basestations and a conventional macro basestation are connected to
Centralized-RAN (C-RAN) to effectively operate the system by enabling power
efficient seamless handover as well as centralized resource control including
dynamic cell structuring to match the limited coverage of mm-wave access with
high traffic user locations via user-plane/control-plane splitting. In this
paper, to prove the effectiveness of the proposed 5G cellular networks with
mm-wave access, system level simulation is conducted by introducing an expected
future traffic model, a measurement based mm-wave propagation model, and a
centralized cell association algorithm by exploiting the C-RAN architecture.
The numerical results show the effectiveness of the proposed network to realize
1000 times higher system rate than the current network in 10 years which is not
achieved by the small cells using commonly considered 3.5 GHz band.
Furthermore, the paper also gives latest status of mm-wave devices and
regulations to show the feasibility of using mm-wave in the 5G systems.Comment: 17 pages, 12 figures, accepted to be published in IEICE Transactions
on Communications. (Mar. 2015
Diseño y aplicaciones de sistemas de antenas inteligentes para redes inalámbricas en el contexto de la internet de las cosas
[SPA] Esta tesis doctoral se presenta bajo la modalidad de compendio de publicaciones. Las antenas de onda de fuga (LWA) consisten en una estructura de guÃa de onda que permite la fuga de parte de la potencia a lo largo de la estructura. Por esta razón, la radiación de la antena se produce por la fuga de energÃa. Para producir una radiación coherente, es necesario controlar esta tasa de radiación a lo largo de la estructura radiante. AsÃ, ajustando con precisión la tasa de radiación, se controla la forma del diagrama de radiación. Las LWAs han sido ampliamente estudiadas por la comunidad cientÃfica debido a sus ventajas, tales como, red de alimentación simple, alta directividad y escaneo en frecuencia pasivo. Sin embargo, presentan ciertas desventajas entre las cuales, la más importante a destacar es el efecto de beam-squinting. Éste se produce por la propiedad dispersiva inherente a este tipo de antenas. Además, presentan dificultades a la hora de generar radiación coherente en las direcciones broadside y endfire, aumentando la complejidad del diseÅ„o para la radiación en dichas direcciones. Las LWA han sido relativamente poco utilizadas en aplicaciones prácticas hasta la fecha, a pesar de sus ventajas. Las pocas aplicaciones en las que se han utilizado son los radares de onda continua modulada en frecuencia y los sistemas de enfoque controlado en frecuencia de campo cercano. Esta tesis propone el uso de las LWAs en aplicaciones prácticas aprovechando las ventajas mencionadas anteriormente y teniendo en cuenta los inconvenientes de este tipo de antenas para que su uso no sea limitado. Recientemente, las LWAs han sido propuestas para aplicaciones de localización de bajo coste, ya que permiten el diseÅ„o de estructuras planas con haces directivos. Además, debido al aumento exponencial del uso de la tecnologÃa, es necesario encontrar nuevas tecnologÃas para una transmisión de datos mayor, más rápida y más eficiente, manteniendo bajos costes de fabricación. Por lo tanto las LWAs pueden ser una solución crucial al mezclar bajos costes de fabricación, alta integrabilidad en diferentes sistemas debido a su tecnologÃa impresa planar y alta directividad al mismo tiempo que se aprovecha su caracterÃstica dispersiva que proporciona un escaneo pasivo en frecuencia. En este contexto, la principal aportación de esta Tesis consiste en el estudio, análisis, diseÅ„o e integración de LWAs en aplicaciones reales y prácticas. Esta Tesis presenta las siguientes tres contribuciones principales, definidas en los tres bloques principales de este documento: • Estudio y análisis de LWAs para su uso en sistemas de estimación de dirección de llegada basados en técnicas de amplitud de monopulso. Comparar las caracterÃsticas y prestaciones de las LWAs junto con las antenas comerciales más utilizadas. Para ello, diseÅ„ar y fabricar las HWM-LWAs con el fin de comparar sus prestaciones con las antenas de panel adquiridas comercialmente. Dado que cada aplicación requiere el diseÅ„o de una HWM-LWA nueva y diferente, estudiar y proponer una técnica eficiente de análisis y diseÅ„o de antenas para obtener fácilmente diagramas de radiación monopulso escaneados en frecuencia. • Una vez analizado que las HWM-LWA son una solución factible para su uso en aplicaciones reales de localización debido a sus diversas ventajas. Integrar las HWM-LWAs diseÅ„adas en sistemas digitales para estimación del ángulo de llegada en interiores. Por lo tanto, diseÅ„ar, desarrollar, configurar e integrar las LWAs en diferentes sistemas basados en las bandas de frecuencia Wi-Fi ISM de 2,4 GHz y 5 GHz. Finalmente, comparar los resultados de estimación obtenidos con otras soluciones propuestas para corroborar que los LWAs pueden ser utilizados en aplicaciones reales. • Asimismo, debido a su bajo coste de fabricación y a su principal propiedad de escaneo en frecuencia. Ampliar el uso de las LWAs para la localización angular en redes de sensores inalámbricas (WSN) utilizando la banda de frecuencias UHF de 900 MHz. Utilizando asà etiquetas RFID pasivas. También estudiar su aplicabilidad en WSNs utilizando etiquetas LoRa activas. Este documento se presenta como una Tesis por compendio, por lo que se presentarán y explicarán brevemente los 4 artÃculos de revistas que se han publicado durante el programa de doctorado. Además, también se presentarán algunos artÃculos de conferencias y otros trabajos en revisión para exponer algunas de las investigaciones que no han sido publicadas en revistas hasta la fecha de depósito de tesis. El documento está organizado como se indica a continuación: En la Introducción, se presenta una contextualización del estado del arte y una explicación rigurosa sobre las LWAs y las aplicaciones anteriormente mencionadas. Las dos partes siguientes se vi dedican a presentar y explicar brevemente los trabajos publicados que contribuyen a esta Tesis. En la parte II, se presentan los cuatro artÃculos que conforman el compendio. Esto es, el análisis de las LWAs para la estimación de la dirección del ángulo de llegada y la integración de las LWAs en sistemas de localización digital usando el protocolo Wi-Fi en el CapÃtulo 1, la banda de frecuencias ISM UHF 900 MHz se utiliza junto con los HWM-LWAs en el CapÃtulo 2, luego se implementa en un sistema en tiempo real para la estimación de la dirección de llegada de múltiples tags pasivos en el CapÃtulo 3 y la integración de LoRa en el CapÃtulo 4. Finalmente, en la Parte III, se discuten las conclusiones generales y las futuras lÃneas de investigación. [ENG] This doctoral dissertation has been presented in the form of thesis by publication. Leaky-Wave Antennas (LWA) consist on a waveguide structure which allows the leakage of part of the power along the structure. For this reason, the radiation of the antenna is produced by the leakage of power. In order to produce coherent radiation, it is necessary to control this leakage rate along the radiating structure. Thus, precisely adjusting the leakage rate, the shape of the radiation pattern is controlled. LWAs have been widely studied by the scientific community due to their advantages, such as, simple feeding network, high directivity and passive frequency-scanning performance. However, they present certain disadvantages among which, the most important to highlight is the beam-squinting effect. TThis is due to the inherent dispersion property of this type of antenna. In addition, LWAs present difficulties when generating coherent radiation in broadside and endfire directions, increasing the complexity of the design for radiation in these directions. LWAs have been relatively unused in practical applications to date, despite of their benefits. The few applications in which they have been used are frequency modulated continuous wave radars and near-field frequency controlled focusing systems.This thesis proposes the use of LWAs in practical applications by exploiting the advantages mentioned above while taking into account the drawbacks of this type of antennas so that their use is not limited. Recently, LWAs have been proposed for low-cost localization applications, as they allow the design of planar structures with directive beams. In addition, due to the exponential increase in the use of technology, it is necessary to find new technologies for higher, faster and more efficient data transmission while maintaining low manufacturing costs. Therefore, LWAs can be a crucial solution mixing low manufacturing costs, high integrability in different systems due to their planar printed technology and high directivity while taking advantage of their dispersive characteristic that provides passive frequency scanning. In this context, the main contribution of this Thesis consist of the study, analysis, design and integration of LWAs in real and practical applications. This Thesis presents the following three main contributions, defined in the three main blocks of this document: • Study and analysis of LWAs for its use in direction of arrival estimation systems based on monopulse amplitude techniques. Compare the characteristics and performance of LWAs along with widely used commercial antennas. For this purpose, design and manufacture the HWM-LWAs in order to compare their performance with commercially acquired panel antennas. Since each application requires the design of a new and different HWM-LWA, a main objective of this block is to study and propose an efficient antenna analysis and design technique to facilitate obtaining frequency-scanned monopulse patterns. • Once analyzed that LWAs are a feasible solution for its use in real localization applications due to their several advantages, integrate the designed half-width microstrip (HWM-LWAs) in digital indoor angle-of-arrival estimation systems. Therefore, design, develop, configure and integrate LWAs in different systems based on the Wi-Fi ISM 2.4 GHz and 5 GHz frequency bands. Finally, compare the obtained estimation results with other proposed solutions to corroborate that LWAs can be used in real applications. • Extending the use of antennas for angular localization in sensor networks using the 900 MHz UHF frequency band: the main properties of low manufacturing cost and passive frequency beam scanning can be used in other applications. Thus, the localization estimation of passive RFID tags is studied, as well as their application in Wireless Sensor Networks (WSNs) using active tags with LORA technology. This document is presented as a Thesis by compilation, so the 4 journal articles that have been published during the Ph.D program will be presented and briefly explained. Besides, some conference articles and other work under review will be also presented to expose some of the research that has not been published in journals. The document is organized as outlined hereafter: In Part I, a state-of-the-art contextualization, a rigorous explanation about LWAs and the previous applications mentioned above is presented. The next two parts are dedicated to present and briefly explain the published works included in this Thesis and their main contributions. In Part II the explanation of the four papers which compose the compendium are presented. This is, LWAs analysis for direction of arrival estimation and the integration of LWAs in digital Wi-Fi localization systems in chapter 1, the UHF 900 MHz ISM frequency band is used in conjunction with HWM-LWAs in chapter 2, then, it is implemented in a real time system for direction of arrival estimation of multi RFID tags in chapter 3 and LoRa integration in chapter 4. Finally, in Part III, the overall conclusions and the future research lines are discussed.Esta tesis doctoral se presenta bajo la modalidad de compendio de publicaciones. Está formada por un total de cuatro artÃculos. Article 1.-: A. Gil-Martinez, M. Poveda-Garcia, J. A. Lopez-Pastor, J. C. Sanchez-Aarnoutse and J. L. Gomez-Tornero, Wi-Fi Direction Finding with Frequency-Scanned Antenna and Channel Hopping Scheme IEEE sensors Journal, , vol. 22, no. 6, pp. 5210-5222, 2022. DOI: 10.1109/JSEN.2021.3122232. Article 2.-: A. Gil-Martinez, M. Poveda-Garcia, D. Cañete-Rebenaque, and J. L. Gomez-Tornero, Frequency-Scanned Monopulse Antenna for RSSI-based Direction Finding of UHF RFID tags IEEE Antennas and Wireless Propagation Letters,, vol. 21, no. 1, pp. 158-162, 2022. DOI: 10.1109/LAWP.2021.3122232. Article 3.-: A. Gil-Martinez, M. Poveda-Garcia, J. Garcia-Fernandez, M. Campo-Valera, D. Cañete-Rebenaque, and J. L. Gomez-Tornero, Direction Finding of RFID tags in UHF Band Using a Passive Beam-Scanning Leaky-Wave Antenna IEEE Journal of Radio Frequency Identi cation, doi: 10.1109/JRFID.2021.3122233. Article 4.-: J. L. Gomez-Tornero, A. Gil-Martinez, M. Poveda-Garcia and D. Cañete-Rebenaque, ARIEL: Passive Beam-Scanning Antenna TeRminal for Iridiscent and E cient LEO Satellite Connectivity in IEEE Antennas and Wireless Propagation Letters, doi: 10.1109/LAWP.2022.3193040.Escuela Internacional de Doctorado de la Universidad Politécnica de CartagenaUniversidad Politécnica de CartagenaPrograma Doctorado en TecnologÃas de la Información y las Comunicacione
- …