Optimizing energy-efficiency for multi-core packet processing systems in a compiler framework

Network applications become increasingly computation-intensive and the amount of traffic soars unprecedentedly nowadays. Multi-core and multi-threaded techniques are thus widely employed in packet processing system to meet the changing requirement. However, the processing power cannot be fully utilized without a suitable programming environment. The compilation procedure is decisive for the quality of the code. It can largely determine the overall system performance in terms of packet throughput, individual packet latency, core utilization and energy efficiency. The thesis investigated compilation issues in networking domain first, particularly on energy consumption. And as a cornerstone for any compiler optimizations, a code analysis module for collecting program dependency is presented and incorporated into a compiler framework. With that dependency information, a strategy based on graph bi-partitioning and mapping is proposed to search for an optimal configuration in a parallel-pipeline fashion. The energy-aware extension is specifically effective in enhancing the energy-efficiency of the whole system. Finally, a generic evaluation framework for simulating the performance and energy consumption of a packet processing system is given. It accepts flexible architectural configuration and is capable of performingarbitrary code mapping. The simulation time is extremely short compared to full-fledged simulators. A set of our optimization results is gathered using the framework

Loop transformations for clustered VLIW architectures

With increasing demands for performance by embedded systems, especially by digital signal processing (DSP) applications, embedded processors must increase available instructionlevel parallelism (ILP) within significant constraints on power consumption and chip cost. Unfortunately, supporting a large amount of ILP on a processor while maintaining a single register file increases chip cost and potentially decreases overall performance due to increased cycle time. To address this problem, some modern embedded processors partition the register file into multiple low-ported register files, each directly connected with one or more functional units. These functional unit/register file groups are called clusters. Clustered VLIW (very long instruction word) architectures need extra copy operations or delays to transfer values among clusters. To take advantage of clustered architectures, the compiler must expose parallelism for maximal functional-unit utilization, and schedule instructions to reduce intercluster communication overhead. High-level loop transformations offer an excellent opportunity to enhance the abilities of low-level optimizers to generate code for clustered architectures. This dissertation investigates the effects of three loop transformations, i.e., loop fusion, loop unrolling, and unroll-and-jam, on clustered VLIW architectures. The objective is to achieve high performance with low communication overhead. This dissertation discusses the following techniques: Loop Fusion This research examines the impact of loop fusion on clustered architectures. A metric based upon communication costs for guiding loop fusion is developed and tested on DSP benchmarks. Unroll-and-jam and Loop Unrolling A new method that integrates a communication cost model with an integer-optimization problem is developed to determine unroll amounts for loop unrolling and unroll-and-jam automatically for a specific loop on a specific architecture. These techniques have been implemented and tested using DSP benchmarks on simulated, clustered VLIW architectures and a real clustered, embedded processor, the TI TMS320C64X. The results show that the new techniques achieve an average speedup of 1.72-1.89 on five different clustered architectures. These techniques have been implemented and tested using DSP benchmarks on simulated, clustered VLIW architectures and a real clustered, embedded processor, the TI TMS320C64X. The results show that the new techniques achieve an average speedup of 1.72-1.89 on five different clustered architectures

Exploiting cache locality at run-time

With the increasing gap between the speeds of the processor and memory system, memory access has become a major performance bottleneck in modern computer systems. Recently, Symmetric Multi-Processor (SMP) systems have emerged as a major class of high-performance platforms. Improving the memory performance of Parallel applications with dynamic memory-access patterns on Symmetric Multi-Processors (SMP) is a hard problem. The solution to this problem is critical to the successful use of the SMP systems because dynamic memory-access patterns occur in many real-world applications. This dissertation is aimed at solving this problem.;Based on a rigorous analysis of cache-locality optimization, we propose a memory-layout oriented run-time technique to exploit the cache locality of parallel loops. Our technique have been implemented in a run-time system. Using simulation and measurement, we have shown our run-time approach can achieve comparable performance with compiler optimizations for those regular applications, whose load balance and cache locality can be well optimized by tiling and other program transformations. However, our approach was shown to improve significantly the memory performance for applications with dynamic memory-access patterns. Such applications are usually hard to optimize with static compiler optimizations.;Several contributions are made in this dissertation. We present models to characterize the complexity and present a solution framework for optimizing cache locality. We present an effective estimation technique for memory-access patterns to support efficient locality optimizations and information integration. We present a memory-layout oriented run-time technique for locality optimization. We present efficient scheduling algorithms to trade off locality and load imbalance. We provide a detailed performance evaluation of the run-time technique

A Survey on Compiler Autotuning using Machine Learning

Since the mid-1990s, researchers have been trying to use machine-learning based approaches to solve a number of different compiler optimization problems. These techniques primarily enhance the quality of the obtained results and, more importantly, make it feasible to tackle two main compiler optimization problems: optimization selection (choosing which optimizations to apply) and phase-ordering (choosing the order of applying optimizations). The compiler optimization space continues to grow due to the advancement of applications, increasing number of compiler optimizations, and new target architectures. Generic optimization passes in compilers cannot fully leverage newly introduced optimizations and, therefore, cannot keep up with the pace of increasing options. This survey summarizes and classifies the recent advances in using machine learning for the compiler optimization field, particularly on the two major problems of (1) selecting the best optimizations and (2) the phase-ordering of optimizations. The survey highlights the approaches taken so far, the obtained results, the fine-grain classification among different approaches and finally, the influential papers of the field.Comment: version 5.0 (updated on September 2018)- Preprint Version For our Accepted Journal @ ACM CSUR 2018 (42 pages) - This survey will be updated quarterly here (Send me your new published papers to be added in the subsequent version) History: Received November 2016; Revised August 2017; Revised February 2018; Accepted March 2018

Mechanistic modeling of architectural vulnerability factor

Reliability to soft errors is a significant design challenge in modern microprocessors owing to an exponential increase in the number of transistors on chip and the reduction in operating voltages with each process generation. Architectural Vulnerability Factor (AVF) modeling using microarchitectural simulators enables architects to make informed performance, power, and reliability tradeoffs. However, such simulators are time-consuming and do not reveal the microarchitectural mechanisms that influence AVF. In this article, we present an accurate first-order mechanistic analytical model to compute AVF, developed using the first principles of an out-of-order superscalar execution. This model provides insight into the fundamental interactions between the workload and microarchitecture that together influence AVF. We use the model to perform design space exploration, parametric sweeps, and workload characterization for AVF

Manticore: Hardware-Accelerated RTL Simulation with Static Bulk-Synchronous Parallelism

The demise of Moore's Law and Dennard Scaling has revived interest in specialized computer architectures and accelerators. Verification and testing of this hardware heavily uses cycle-accurate simulation of register-transfer-level (RTL) designs. The best software RTL simulators can simulate designs at 1--1000~kHz, i.e., more than three orders of magnitude slower than hardware. Faster simulation can increase productivity by speeding design iterations and permitting more exhaustive exploration. One possibility is to use parallelism as RTL exposes considerable fine-grain concurrency. However, state-of-the-art RTL simulators generally perform best when single-threaded since modern processors cannot effectively exploit fine-grain parallelism. This work presents Manticore: a parallel computer designed to accelerate RTL simulation. Manticore uses a static bulk-synchronous parallel (BSP) execution model to eliminate runtime synchronization barriers among many simple processors. Manticore relies entirely on its compiler to schedule resources and communication. Because RTL code is practically free of long divergent execution paths, static scheduling is feasible. Communication and synchronization no longer incur runtime overhead, enabling efficient fine-grain parallelism. Moreover, static scheduling dramatically simplifies the physical implementation, significantly increasing the potential parallelism on a chip. Our 225-core FPGA prototype running at 475 MHz outperforms a state-of-the-art RTL simulator on an Intel Xeon processor running at $\approx$ 3.3 GHz by up to 27.9$\times$ (geomean 5.3$\times$) in nine Verilog benchmarks

Performance and Memory Space Optimizations for Embedded Systems

Embedded systems have three common principles: real-time performance, low power consumption, and low price (limited hardware). Embedded computers use chip multiprocessors (CMPs) to meet these expectations. However, one of the major problems is lack of efficient software support for CMPs; in particular, automated code parallelizers are needed. The aim of this study is to explore various ways to increase performance, as well as reducing resource usage and energy consumption for embedded systems. We use code restructuring, loop scheduling, data transformation, code and data placement, and scratch-pad memory (SPM) management as our tools in different embedded system scenarios. The majority of our work is focused on loop scheduling. Main contributions of our work are: We propose a memory saving strategy that exploits the value locality in array data by storing arrays in a compressed form. Based on the compressed forms of the input arrays, our approach automatically determines the compressed forms of the output arrays and also automatically restructures the code. We propose and evaluate a compiler-directed code scheduling scheme, which considers both parallelism and data locality. It analyzes the code using a locality parallelism graph representation, and assigns the nodes of this graph to processors.We also introduce an Integer Linear Programming based formulation of the scheduling problem. We propose a compiler-based SPM conscious loop scheduling strategy for array/loop based embedded applications. The method is to distribute loop iterations across parallel processors in an SPM-conscious manner. The compiler identifies potential SPM hits and misses, and distributes loop iterations such that the processors have close execution times. We present an SPM management technique using Markov chain based data access. We propose a compiler directed integrated code and data placement scheme for 2-D mesh based CMP architectures. Using a Code-Data Affinity Graph (CDAG) to represent the relationship between loop iterations and array data, it assigns the sets of loop iterations to processing cores and sets of data blocks to on-chip memories. We present a memory bank aware dynamic loop scheduling scheme for array intensive applications.The goal is to minimize the number of memory banks needed for executing the group of loop iterations