Application of modern mechanism on poultry farms and its impact on the environment

The modern way of raising poultry is significantly different from poultry farming as it used to be. The development of poultry production and increased profitability was contributed, first of all, by the development of science, which found a number of solutions for the rapid increase in the number of poultry and its productivity. The development and application of mechanization and automation contributed to the industrial character of production. Modern poultry farms are equipped with machinery that, in addition to the welfare of poultry farming, contributes to increasing labor productivity, saving labor and improving the general state of the environment on farms. When designing new and expanding existing poultry farms, guidelines for the application of clean technologies are increasingly being used, which aim to reduce negative impacts on the environment. The equipment is characterized by a high degree of automation, and there is an increasing application of information technologies in poultry farming. A big problem on traditional poultry farms is low energy efficiency and increased energy consumption, which can be overcome by using smart control systems, which is also an advantage from an environmental point of view

Theoretical and practical aspects of robot calibration with experimental verification

One of the greatest challenges in today's industrial robotics is the development of off-line programming systems that allow drastic reduction in robots' reprogramming time, improving productivity. The article purpose is to pave the way to the construction of generic calibration systems easily adapted to any type of robot, regardless their application, such as modular robots and robot controllers specifically designed for non-standard applications. A computer system was built for developing and implementing a calibration system that involves the joint work of computer and measurement systems. Each step of this system's development is presented together with its theoretical basis. With the development of a remote maneuvering system based on ABB S3 controller experimental tests have been carried out using an IRB2000 robot and a measurement arm (ITG ROMER) with 0.087 mm of position measurement accuracy. The robot model used by its controller was identified and the robot was calibrated and evaluated in different workspaces resulting in an average accuracy improvement from 1.5 mm to 0.3 mm

Improving cereal productivity and farmers’ income using a strategic application of fertilizers in West Africa

In the past two years, ICRISAT, in collaboration with other International Agricultural Research Centres, National Agricultural Research and Extension Systems, has been evaluating and promoting point or hill application of fertilizer along with “Warrantage” in three West African countries, namely, Burkina Faso, Mali and Niger. The hill application of fertilizers consists of applying small doses of fertilizer in the planting hills of millet and sorghum. The combination of strategic hill application of fertilizer with complementary institutional and market linkages, through an inventory credit system (known as “Warrantage”) offers a good opportunity to improve crop productivity and farmers’ incomes. Results from the two year on-farm trials showed that, on average, in all the three countries, grain yields of millet and sorghum were greater by 44 to 120% while incomes of farmers increased by 52 to 134% when using hill application of fertilizer than with the earlier recommended fertilizer broadcasting methods and farmers’ practice. Substantial net profits were obtained by farmers using “Warrantage”. Farmers’ access to credit and inputs was improved substantially through the “Warrantage” system. The technology has reached up to 12650 farm households in the three countries and efforts are in progress to further scale-up and out the technology to wider geographical area

Using the Asian Knowledge Model “APO” as a Determinant for Performance Excellence in Universities- Empirical Study at Al -Azhar University- Gaza

This study aims to use the Asian knowledge model “APO” as a determinant for performance excellence in universities and identifying the most effecting factors on it. This study was applied on Al-Azhar University in Gaza strip. The result of the study showed that (APO) model is valid as a measure and there are four dimensions in the model affecting significantly more than the others (university processes, KM leadership, personnel, KM outputs). Furthermore, performance excellence produced though modernizing the means of education, curriculum development, technology and flexibility in the organizational structure. The study recommends expanding the usage of (APO) model, enhancing the role of knowledge leadership, technology, organizational flexibility, sharing culture and incentive systems that encouraging innovation

Options for Climate-Smart Agriculture at Kaptumo Site in Kenya

This report identifies and assesses climate-smart agricultural practices through participatory appraisal tools with experts and farmers, as part of the MICCA pilot project in Kaptumo, Kenya. The aim is to highlight and add climate-smart practices within the ongoing development programme which aims to integrate climate change adaptation and mitigation with improving livelihoods and productivity of the dairy farming system

Design for safety: theoretical framework of the safety aspect of BIM system to determine the safety index

Despite the safety improvement drive that has been implemented in the construction industry in Singapore for many years, the industry continues to report the highest number of workplace fatalities, compared to other industries. The purpose of this paper is to discuss the theoretical framework of the safety aspect of a proposed BIM System to determine a Safety Index. An online questionnaire survey was conducted to ascertain the current workplace safety and health situation in the construction industry and explore how BIM can be used to improve safety performance in the industry. A safety hazard library was developed based on the main contributors to fatal accidents in the construction industry, determined from the formal records and existing literature, and a series of discussions with representatives from the Workplace Safety and Health Institute (WSH Institute) in Singapore. The results from the survey suggested that the majority of the firms have implemented the necessary policies, programmes and procedures on Workplace Safety and Health (WSH) practices. However, BIM is still not widely applied or explored beyond the mandatory requirement that building plans should be submitted to the authorities for approval in BIM format. This paper presents a discussion of the safety aspect of the Intelligent Productivity and Safety System (IPASS) developed in the study. IPASS is an intelligent system incorporating the buildable design concept, theory on the detection, prevention and control of hazards, and the Construction Safety Audit Scoring System (ConSASS). The system is based on the premise that safety should be considered at the design stage, and BIM can be an effective tool to facilitate the efforts to enhance safety performance. IPASS allows users to analyse and monitor key aspects of the safety performance of the project before the project starts and as the project progresses

Applications of lean thinking: a briefing document

This report has been put together by the Health and Care Infrastructure Research and Innovation Centre (HaCIRIC) at the University of Salford for the Department of Health. The need for the report grew out of two main simple questions, o Is Lean applicable in sectors other than manufacturing? o Can the service delivery sector learn from the success of lean in manufacturing and realise the benefits of its implementation?The aim of the report is to list together examples of lean thinking as it is evidenced in the public and private service sector. Following a review of various sources a catalogue of evidence is put together in an organised manner which demonstrates that Lean principles and techniques, when applied rigorously and throughout an entire organization/unit, they can have a positive impact on productivity, cost, quality, and timely delivery of services

Lean Thinking: Theory, Application and Dissemination

This book was written and compiled by the University of Huddersfield to share the learnings and experiences of seven years of Knowledge Transfer Partnership (KTP) and Economic and Social Research Council (ESRC) funded projects with the National Health Service (NHS). The focus of these projects was the implementation of Lean thinking and optimising strategic decision making processes. Each of these projects led to major local improvements and this book explains how they were achieved and compiles the lessons learnt. The book is split into three chapters; Lean Thinking Theory, Lean Thinking Applied and Lean Thinking Dissemination

The Design of a Monitoring Application System for The Production of Foam Products Using the UML And Waterfall Methods

The development of information technology, which is followed by a higher level of competition in the foam product industry, encouraging companies to manage their company's resources properly and to plan effective, systematic and mature activities within the company. As a company with a variety of products, the most dominant problem is in the productivity process. Production is the most important part of a manufacturing company, where in carrying out its production activities this company produces based on orders from customers (Job Orders). And the problems that often occur are planning revisions in the midst of production and changing production schedules between groups (lines), delays in production planning in terms of prioritizing planning, and still being done manually in making daily reports. By implementing monitoring, which is the supervision and control of an activity where measurements and evaluations are completed repeatedly from time to time, monitoring is carried out for the purposes of the company and to maintain ongoing management. Monitoring will provide information about the status and trend of production activities towards the company's goals. The solution to this production problem is to build a web-based foam product production monitoring system application using the Waterfall method which is integrated with UML the method used is use case diagrams, activity diagrams, sequence diagrams, class diagrams and component diagrams and software development with PHP and MySQL technology. With Black box testing, it is proven that the design of this foam production monitoring system application can assist the company's foam product production activities in fulfilling customer orders and accurate reports so that it becomes effective and efficient. in improving the productivity and performance of the company