Estimating Average End-to-End Delays in IEEE 802.11 Multihop Wireless Networks

In this paper, we present a new analytic model for evaluating average end-to-end delay in IEEE 802.11 multihop wireless networks. Our model gives closed expressions for the end-to-end delay in function of arrivals and service time patterns. Each node is modeled as a M/M/1/K queue from which we can derive expressions for service time via queueing theory. By combining this delay evaluation with different admission controls, we design a protocol called DEAN (Delay Estimation in Ad hoc Networks). DEAN is able to provide delay guarantees for QoS applications in function of the application level requirements. Through extensive simulations, we compare performance evaluation of DEAN with other approaches like, for instance, DDA

A Remote Capacity Utilization Estimator for WLANs

In WLANs, the capacity of a node is not fixed and can vary dramatically due to the shared nature of the medium under the IEEE 802.11 MAC mechanism. There are two main methods of capacity estimation in WLANs: Active methods based upon probing packets that consume the bandwidth of the channel and do not scale well. Passive methods based upon analyzing the transmitted packets that avoid the overhead of transmitting probe packets and perform with greater accuracy. Furthermore, passive methods can be implemented locally or remotely. Local passive methods require an additional dissemination mechanism in order to communicate the capacity information to other network nodes which adds complexity and can be unreliable under adverse network conditions. On the other hand, remote passive methods do not require a dissemination mechanism and so can be simpler to implement and also do not suffer from communication reliability issues. Many applications (e.g. ANDSF etc) can benefit from utilizing this capacity information. Therefore, in this thesis we propose a new remote passive Capacity Utilization estimator performed by neighbour nodes. However, there will be an error associated with the measurements owing to the differences in the wireless medium as observed by the different nodes’ location. The main undertaking of this thesis is to address this issue. An error model is developed to analyse the main sources of error and to determine their impact on the accuracy of the estimator. Arising from this model, a number of modifications are implemented to improve the accuracy of the estimator. The network simulator ns2 is used to investigate the performance of the estimator and the results from a range of different test scenarios indicate its feasibility and accuracy as a passive remote method. Finally, the estimator is deployed in a node saturation detection scheme where it is shown to outperform two other similar schemes based upon queue observation and probing with ping packets

Bandwidth Estimation for IEEE 802.11-based Ad Hoc Networks

International audienceSince 2005, IEEE 802.11-based networks have been able to provide a certain level of quality of service (QoS) by the means of service differentiation, due to the IEEE 802.11e amendment. However, no mechanism or method has been standardized to accurately evaluate the amount of resources remaining on a given channel. Such an evaluation would, however, be a good asset for bandwidth-constrained applications. In multihop ad hoc networks, such evaluation becomes even more difficult. Consequently, despite the various contributions around this research topic, the estimation of the available bandwidth still represents one of the main issues in this field. In this paper, we propose an improved mechanism to estimate the available bandwidth in IEEE 802.11-based ad hoc networks. Through simulations, we compare the accuracy of the estimation we propose to the estimation performed by other state-of-the-art QoS protocols, BRuIT, AAC, and QoS-AODV

Controlo de congestionamento em redes sem fios

Doutoramento em Engenharia ElectrotécnicaCongestion control in wireless networks is an important and open issue. Previous research has proven the poor performance of the Transport Control Protocol (TCP) in such networks. The factors that contribute to the poor performance of TCP in wireless environments concern its unsuitability to identify/detect and react properly to network events, its TCP window based ow control algorithm that is not suitable for the wireless channel, and the congestion collapse due to mobility. New rate based mechanisms have been proposed to mitigate TCP performance in wired and wireless networks. However, these mechanisms also present poor performance, as they lack of suitable bandwidth estimation techniques for multi-hop wireless networks. It is thus important to improve congestion control performance in wireless networks, incorporating components that are suitable for wireless environments. A congestion control scheme which provides an e - cient and fair sharing of the underlying network capacity and available bandwidth among multiple competing applications is crucial to the definition of new e cient and fair congestion control schemes on wireless multi-hop networks. The Thesis is divided in three parts. First, we present a performance evaluation study of several congestion control protocols against TCP, in wireless mesh and ad-hoc networks. The obtained results show that rate based congestion control protocols need an eficient and accurate underlying available bandwidth estimation technique. The second part of the Thesis presents a new link capacity and available bandwidth estimation mechanism denoted as rt-Winf (real time wireless inference). The estimation is performed in real-time and without the need to intrusively inject packets in the network. Simulation results show that rt-Winf obtains the available bandwidth and capacity estimation with accuracy and without introducing overhead trafic in the network. The third part of the Thesis proposes the development of new congestion control mechanisms to address the congestion control problems of wireless networks. These congestion control mechanisms use cross layer information, obtained by rt-Winf, to accurately and eficiently estimate the available bandwidth and the path capacity over a wireless network path. Evaluation of these new proposed mechanisms, through ns-2 simulations, shows that the cooperation between rt-Winf and the congestion control algorithms is able to significantly increase congestion control eficiency and network performance.O controlo de congestionamento continua a ser extremamente importante quando se investiga o desempenho das redes sem fios. Trabalhos anteriores mostram o mau desempenho do Transport Control Proto- col (TCP) em redes sem fios. Os fatores que contribuem para um pior desempenho do TCP nesse tipo de redes s~ao: a sua falta de capacidade para identificar/detetar e reagir adequadamente a eventos da rede; a utilização de um algoritmo de controlo de uxo que não é adequado para o canal sem fios; e o colapso de congestionamento devido á mobilidade. Para colmatar este problemas foram propostos novos mecanismos de controlo de congestionamento baseados na taxa de transmissão. No entanto, estes mecanismos também apresentam um pior desempenho em redes sem fios, já que não utilizam mecanismos adequados para a avaliação da largura de banda disponível. Assim, é importante para melhorar o desempenho do controlo de congestionamento em redes sem fios, incluir componentes que são adequados para esse tipo de ambientes. Um esquema de controlo de congestionamento que permita uma partilha eficiente e justa da capacidade da rede e da largura de banda disponível entre múltiplas aplicações concorrentes é crucial para a definição de novos, eficientes e justos mecanismos de controlo congestionamento para as redes sem fios. A Tese está dividida em três partes. Primeiro, apresentamos um estudo sobre a avaliação de desempenho de vários protocolos de controlo de congestionamento relativamente ao TCP, em redes sem fios em malha e ad-hoc. Os resultados obtidos mostram que os protocolos baseados na taxa de transmissão precisam de uma técnica de avaliação da largura de banda disponível que seja eficiente e precisa . A segunda parte da Tese apresenta um novo mecanismo de avaliação da capacidade da ligação e da largura de banda disponível, designada por rt-Winf (real time wireless inference). A avaliação é realizada em tempo real e sem a necessidade de inserir tráfego na rede. Os resultados obtidos através de simulação e emulação mostram que o rt-Winf obtém com precisão a largura de banda disponível e a capacidade da ligação sem sobrecarregar a rede. A terceira parte da Tese propõe novos mecanismos de controlo de congestionamento em redes sem fios. Estes mecanismos de controlo de congestionamento apresentam um conjunto de caracter ísticas novas para melhorar o seu desempenho, de entre as quais se destaca a utilização da informação de largura de banda disponível obtida pelo rt-Winf. Os resultados da avaliação destes mecanismos, utilizando o simulador ns-2, permitem concluir que a cooperação entre o rt-Winf e os algoritmos de controlo de congestionamento aumenta significativamente o desempenho da rede

Dynamic Bandwidth Management in IEEE 802.11-Based Multihop Wireless Networks

International audienceIn this paper, we propose a new protocol named DRBT (Dynamic Regulation of Best Effort Traffic) which supports QoS throughput guarantees and provides a distributed regulation mechanism for Best Effort traffic in multihop wireless networks. By adapting dynamically the rate of Best Effort traffic at the link layer, DRBT increases the acceptance ratio of QoS flows and provides a good use of the remaining resources through the network. Our protocol also provides an accurate method to evaluate the available bandwidth in IEEE 802.11-based ad hoc networks which is able to differentiate QoS applications from Best Effort traffic. Through extensive simulations, we compare the performance of our proposal scheme with some others protocols like QPART for instance