Performance analysis and centralised optical processing in next generation access networks

The Next Generation Passive Optical Network (NG-PON) is currently being standardised and developed, with a goal to achieve higher bandwidth at 10Gb/s, greater capacity at thousands of users and longer backhaul reach at 60km or 100km. The aim is to provide cost effective solutions for telecom operators to vastly deploy optical access networks, enabling customers with the benefit of the greater bandwidth and wider range of services. This thesis presents research that has identified and addressed various design issues relating to next generation access networks. Interferometric noise may be present in future, ring based, access networks which utilise WDM and OADMs. Simulation and experiment results are presented which studies the performance tolerance to not-precisely-defined wavelength, in the presence of interferometric noise. The impact of receiver electrical filtering was also investigated. The next generation access network will, in the upstream direction, use burst transmission and are likely to need a large tolerance to wavelength drift due to the low cost equipment used at the customer’s premises. A demonstration of optical burst equalisation was presented, based on SOAs. This study also explores the possibility of reducing the SOA saturation induced non-linear distortions through simulations and experiments. As an extension to the optical burst equaliser and to remedy the saturation induced distortions, an intermediate site optical processing system was proposed. This solution not only performs burst-mode wavelength conversion at 10 Gb/s, but also pre-chirps the signal to allow long-reach transmission and suppressed level fluctuation to ease the requirements on the burst-mode receiver. As a result, a proof of concept 10Gb/s Wavelength Converting Optical Access Network (WCOAN) with up to 62km DWDM backhaul is experimentally demonstrate. It is designed to consolidate drifting wavelengths, generated with an uncooled laser in the upstream direction, into a stable wavelength channel for DWDM long backhaul transmission

WDM/TDM PON bidirectional networks single-fiber/wavelength RSOA-based ONUs layer 1/2 optimization

This Thesis proposes the design and the optimization of a hybrid WDM/TDM PON at the L1 (PHY) and L2 (MAC) layers, in terms of minimum deployment cost and enhanced performance for Greenfield NGPON. The particular case of RSOA-based ONUs and ODN using a single-fibre/single-wavelength is deeply analysed. In this WDM/TDM PON relevant parameters are optimized. Special attention has been given at the main noise impairment in this type of networks: the Rayleigh Backscattering effect, which cannot be prevented. To understand its behaviour and mitigate its effects, a novel mathematical model for the Rayleigh Backscattering in burst mode transmission is presented for the first time, and it has been used to optimize the WDM/TDM RSOA based PON. Also, a cost-effective, simple design SCM WDM/TDM PON with rSOA-based ONU, was optimized and implemented. This prototype was successfully tested showing high performance, robustness, versatility and reliability. So, the system is able to give coverage up to 1280 users at 2.5 Gb/s / 1.25 Gb/s downstream/upstream, over 20 Km, and being compatible with the GPON ITU-T recommendation. This precedent has enabled the SARDANA network to extend the design, architecture and capabilities of a WDM/TDM PON for a long reach metro-access network (100 km). A proposal for an agile Transmission Convergence sub-layer is presented as another relevant contribution of this work. It is based on the optimization of the standards GPON and XG-PON (for compatibility), but applied to a long reach metro-access TDM/WDM PON rSOA-based network with higher client count. Finally, a proposal of physical implementation for the SARDANA layer 2 and possible configurations for SARDANA internetworking, with the metro network and core transport network, are presented

Dynamically reconfigurable optical access network

This dissertation presents the research results on a fiber-optic high-bitrate access network which enables dynamic bandwidth allocation as a response to varying subscribers' demands and bandwidth needs of emerging services. The motivation of the research is given in Chapter 1 "Introduction" together with a brief comparative discussion on currently available and future access networks. The idea of wavelength reconfigurability in the last-mile networks is described as a solution for more efficient bandwidth utilization and a subject of the Broadband Photonics project. Chapter 2 "Wavelength-flexible WDM/TDM access network - architecture" provides a comprehensive description of the proposed solution with each network element being analyzed in terms of its functionalities. This includes a colorless optical network unit and a reconfigurable optical add/drop multiplexer. An estimation of power budget is followed by the choice of wavelength set and network control and management layer overview. In Chapter 3 "Reflective transceiver module for ONU" after discussing different communication schemes and modulation formats three approaches to a colorless high-bitrate transmitter are analyzed in detail. This includes experiment and simulation results on a reflective semiconductor optical amplifier, reflective electro-absorption modulator and a Michelson-interferometer modulator. The Chapter is concluded with a comparative discussion. Chapter 4 "Reconfigurable optical add/drop multiplexer" discusses another key element in the proposed network architecture which is an integrated structure of micro-ring resonators providing wavelength reconfigurability. The measured characteristics assess the applicability of the device able to support unicast and multicast transmission. A range of possible sources of signal degradation in the access links are analyzed in Chapter 5 "Transmission and network impairments in the access network". An estimation of potential power penalties resulting from such impairments in the proposed system follow afterwards. Special attention is paid to optical in-band crosstalk penalties and improvement methods in Chapter 6 "Interferometric crosstalk in the access network with an RSOA". This subject is treated extensively with the support of mathematical considerations and experimental results. Proof-of-concept experiments of the proposed network architecture are presented in Chapter 7 "Reconfigurable WDM/TDM access network - experiments". The results of bidirectional transmission of high-bitrate WDM signals in different wavelength allocation schemes are discussed in detail. From there, by means of simulations the behavior of a full-scale network is assessed. In Chapter 8 "Migration towards WDM/TDM access network" the migration scenario from currently deployed fiber-optic access networks towards the novel solution is proposed. Afterwards, a short dispute on the economics of last-mile fiber technologies is included. Finally, the work is concluded and potential future research ideas based on this thesis are given in Chapter 9 "Conclusions and further work"

Enhanced PON Infrastructure Enabled by Silicon Photonics

Les systèmes de courte portée et de détection directe sont le dernier/premier kilomètre de la fourniture des services Internet d'aujourd'hui. Deux cas d'application sont abordés dans cette thèse, l'un concerne l'amélioration des performances des services Internet par la Fibre-To-TheHome ou les réseaux optiques passifs (PONs). L'autre est le radio access network (RAN) pour le fronthaul. Notre objectif pour RAN est de superposer les signaux 5G sur une infrastructure PON. Nous démontrons expérimentalement la génération d'un signal de répartition multiplexée de fréquences orthogonales (OFDM) à bande latérale unique en utilisant un modulateur IQ sur puce basé sur les photoniques au silicium à micro-anneau. Il s'agit d'une solution à coût bas permettant aux PONs d'augmenter les débits de données grâce à l'utilisation d'OFDM. Nous avons généré un signal OFDM à large bande avec un ratio de suppression de bande latérale de plus de 18 dB. Afin de confirmer la robustesse de la dispersion chromatique (CD), nous transmettons le signal généré OFDM SSB dans plus de 20 km de fibre de monomode standard. Aucun fading induit par la CD n'a été observé et le taux d'erreur sur les bits était bon. Nous proposons une solution de photoniques au silicium pour un réseau optique passif afin de mitiger l'interférence de battement signal-signal (SSBI) dans la transmission OFDM, et de récupérer une partie des porteuses de la liaison descendante pour une utilisation dans la liaison montante. Le sous-système recrée les interférences à une entrée du détecteur équilibré ; le signal de données corrompu par SSBI est à la deuxième entrée. L'annulation se produit via la soustraction dans la détection équilibrée. Comme notre solution de photoniques au silicium (SiP) ne peut pas filtrer les signaux idéalement, nous examinons un facteur d'échelle introduit dans la détection équilibrée qui peut balancer les effets de filtrage non idéaux. Nous montrons expérimentalement l'annulation de l'interférence donne de bonnes performances même avec une porteuse faible, soit pour un ratio porteuse/signal ultra bas de 0 dB. Bien que notre solution soit sensible aux effets de la température, notre démonstration expérimentale montre que le réglage de la fréquence résonante peut dériver jusqu'à 12 GHz de la valeur ciblée et présenter toujours de bonnes performances. Nous effectuons des simulations extensives du schéma d'annulation SSBI proposé, et suggérons une diverse conception polarisée pour le sous-système SiP. Nous examinons via la simulation la vulnérabilité à la variation de température et introduisons une nouvelle métrique de performance : Q-facteur minimum garanti. Nous nous servons de cette métrique pour évaluer la robustesse d'annulation SSBI contre la dérive de fréquence induite par les changements de température. Nous maximisons l'efficacité spectrale sous différentes conditions du système en balayant les paramètres de conception contrôlables. Finalement, les résultats de la simulation du système fournissent des indications sur la conception du résonateur micro-anneau, ainsi que sur le choix de la bande de garde et du format de modulation pour obtenir la plus grande efficacité spectrale. Finalement, nous nous concentrons sur la superposition des signaux 5G sur une infrastructure PON pour RAN. Nous expérimentalement validons un sous-système photonique au silicium conçu pour les réseaux optiques passifs avec réutilisation de porteuses et compatibilité radiosur-fibre (RoF) analogique 5G. Le sous-système permet la détection simultanée des signaux RoF et du signal PON transmis dans une seule tranche assignée de longueur d'onde. Tout en maintenant une qualité suffisante de détection des signaux RoF et PON, il n'y a que la puissance minimale de la porteuse qui est extraite pour chaque détection, ce qui conserve ainsi la puissance de la porteuse pour la modulation de liaison montante. Nous réalisons une suppression efficace du signal de liaison descendante en laissant une porteuse propre et forte pour la remodulation. Nous démontrons expérimentalement le signal RoF de liaison montante via un modulateur à micro-anneau. Nous avons détecté avec succès un signal à large bande de 8 GHz et cinq signaux RoF de 125 MHz simultanément. Et deux signaux RoF de 125 MHz sont remodulés sur la même porteuse. Le signal RoF de liaison montante généré est de 13 dB de plus que les signaux de liaison descendante, ce qui indique leur robustesse contre la diaphonie des signaux résiduels de la liaison descendante.Short reach, direct detection systems are the last/first mile of today's internet service provision. Two use cases are addressed in this thesis, one is for enhancing performance of Internet services on fiber-to-the-home or passive optical networks (PON). The other is radio access networks (RAN) for fronthaul. Our focus for RAN is to overlay 5G signals on a PON infrastructure. We experimentally demonstrate the generation of a single-sideband orthogonal frequency division multiplexed (OFDM) signal using an on-chip silicon photonics microring-based IQ modulator. This is a low cost solution enabling PONs to increase data rates through the use of OFDM. We generated a wideband OFDM signal with over 18 dB sideband suppression ratio. To confirm chromatic dispersion (CD) robustness, we transmit the generated SSB OFDM signal over 20 km of standard single mode fiber. No CD-induced fading was observed and bit error rate was good. We propose a silicon photonics solution for a passive optical network to mitigate signal-signal beat interference (SSBI) in OFDM transmission, and to recuperate a part of the downlink carrier for use in the uplink. The subsystem recreates the interference at one balanced detector input; the data signal corrupted with SSBI is at the second input. Cancellation occurs via subtraction in the balanced detection. As our silicon photonics (SiP) solution cannot filter the signals ideally, we examine a scaling factor to be introduced to the balanced detection that can trade-off the non-ideal filtering effects. We show experimentally that the interference is cancelled, allowing good performance even with a weak carrier, that is, for ultra low carrier to signal ratio of 0 dB. Although our solution is sensitive to temperature effects, our experimental demonstration shows the tuning of the resonant frequency can drift by as much as 12 GHz from the targeted value and still provide good performance. We perform extensive simulations of the proposed SSBI cancellation scheme, and suggest a polarization diverse design for the SiP subsystem. We examine via simulation the vulnerability to temperature variation and introduce a new performance metric: minimum guaranteed Qfactor. We use this metric to evaluate the SSBI cancellation robustness against the frequency drift induced by temperature changes. We maximize the spectral efficiency under different system conditions by sweeping the controllable design parameters. Finally the system simulation results provide guidance on the microring resonator design, as well as choice of guard band and modulation format to achieve the highest spectral efficiency. Finally, we turn to focus on overlay 5G signals on a PON infrastructure for RAN. We experimentally validate a silicon photonic subsystem designed for passive optical networks with carrier reuse and 5G analog radio-over-fiber (RoF) compatibility. The subsystem enables the simultaneous detection of RoF signals and a PON signal transmitted in a single assigned wavelength slot. While maintaining sufficient quality of RoF and PON signal detection, only the minimum carrier power is leached off for each detection, thus conserving carrier power for uplink modulation. We realize effective downlink signal suppression to leave a clean and strong carrier for remodulation. We demonstrate experimentally the RoF uplink signal via a micro ring modulator. We successfully detected an 8 GHz broadband signal and five 125 MHz RoF signals simultaneously. And two 125 MHz radio over fiber signals are remodulated onto the same carrier. The generated uplink RoF signal is 13 dB over the downlink signals, indicating their robustness against the crosstalk from residual downlink signals

Next generation optical access networks and coexistence with legacy PONs

Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmission capacities up to 2.5 Gb/s down and 1.25 Gb/s up, among multiple users. Research on high-speed electronics and Wavelength Division Multiplexing (WDM) has allowed the emergence of what is known as the second generation PON (NG-PON2), which specify aggregated capacities up to 40 Gb/s, stacking four channels at symmetric data rates of 10 Gb/s each, for residential scenarios. Nevertheless, the capacity per channel is still shared between multiple users due to the use of TDM. Moreover, the optical spectrum efficiency is low because channels are widely spaced (50 to 100 GHz). In addition, the sensitivity, reach and number of users is limited as consequence of using direct detection (DD) systems. In consequence, and due to the increase in bandwidth demands of new multimedia applications, it is necessary to propose solutions that cope with this tendency and, even more important, that can coexist with legacy systems, being one of the major requirements of network operators to guarantee a smooth and non-disruptive technology migration. In this thesis, a breakthrough technology such as Ultra-Dense WDM (UDWDM) that allows to allocate a large number of channels spaced only by a few GHz is used. This approach consent to envision the concept of Wavelength-to-the-User, where each costumer can be served with dedicated bandwidth links. The key technologies are based on coherent systems, with inherent wavelength selectivity and improved sensitivity compared to DD systems, thanks to the booster action of a tunable local oscillator (LO) laser. Because of cost is the main constraint in access networks, especially at the customer premises equipment (Optical Network Unit - ONU), in this thesis, a new class of coherent transceivers, based on low-cost direct modulated lasers and simplified receiver schemes, are proposed and experimentally tested. Moreover, the issue of coexistence is investigated through theoretical studies and real-time implementations, demonstrating full compatibility with legacy systems. Between the proposed solutions, a simple technique to adjust digitally the direct phase modulation of a distributed feedback (DFB) laser is presented to support flexible transmission rates. Next, several multilevel phase modulation formats for achieving higher transmission rates and better spectral efficiency are experimentally compared. Subsequently, the topic of photonic integration is addressed, demonstrating for the first time an 8-ary hybrid amplitude and phase modulated transmitter (Tx), by using a low-cost, small-footprint and energy efficient dual electro-absorption modulated laser (DEML). Finally, two novel proposals, to reduce the complexity of heterodyne and intradyne detection, are provided to face the typical issue of complexity and high-cost of coherent systems. The former explores the possibility of using only one DFB laser as LO and Tx at the ONU. The later demonstrates for the first time, a novel phase time diversity technique alternating phase modulation at each complex component (in-phase - I and quadrature - Q) achieving a 10 Gb/s' transmission with polarization independence.En la actualidad, la Fibra hasta el Hogar es una de las soluciones más prometedoras para proporcionar servicios de banda ancha en las redes de acceso. Sin embargo, la fibra se usa de manera poco eficiente, ya que la mayoría de los sistemas implementados todavía están basados en redes ópticas pasivas de multiplexación por división en el tiempo (TDM-PON) que brindan capacidades de transmisión compartidas entre múltiples usuarios de hasta 2.5 Gb/s y 1.25 Gb/s. La investigación en electrónica de alta velocidad y la multiplexación por división de longitud de onda (WDM) ha permitido el surgimiento de lo hoy se conoce como PON de segunda generación (NG-PON2), que especifica capacidades agregadas de hasta 40 Gb/s, apilando cuatro canales a velocidades de datos simétricas de 10 Gb/s cada uno, para escenarios residenciales. Sin embargo, la capacidad por canal todavía se comparte entre múltiples usuarios debido al uso de TDM. Además, la eficiencia en el uso del espectro óptico es baja porque los canales están muy separados (50 a 100 GHz). Asimismo, la sensibilidad, el alcance y el número de usuarios están limitados debido al uso de sistemas de detección directa. En consecuencia, y debido al aumento de las demandas de ancho de banda de las nuevas aplicaciones multimedia, es necesario proponer soluciones que respondan a esta tendencia y, lo que es más importante, que puedan coexistir con sistemas heredados, siendo uno de los principales requisitos de los operadores de red para garantizar una migración de tecnología fluida y sin interrupciones. En esta tesis, se utiliza una tecnología de vanguardia, como la multiplexación por división ultra densa de longitud de onda (UDWDM) que permite distribuir un gran número de canales espaciados solo por unos pocos GHz. Este enfoque permite vislumbrar el concepto de longitud de onda para el usuario, donde cada cliente puede usar enlaces de ancho de banda dedicados. Las tecnologías clave están basadas en los sistemas coherentes, con selectividad de longitud de onda inherente y sensibilidad mejorada en comparación con los sistemas de detección directa, gracias al efecto de amplificación óptica de un láser oscilador local (LO) sintonizable. Debido a que el costo es la principal restricción en las redes de acceso, especialmente del equipo en las instalaciones del cliente (unidad de red óptica - ONU), en ésta tesis, una nueva clase de transceptores coherentes, basados en láseres de bajo coste modulados directamente y esquemas de recepción simplificados, son propuestos y probados experimentalmente. Además, el problema de la coexistencia es investigado a través de estudios teóricos y experimentos en tiempo real, demostrando compatibilidad total con los sistemas heredados. Entre las soluciones propuestas, se presenta una técnica simple para ajustar digitalmente la modulación de fase directa de un láser de retroalimentación distribuida (DFB), y admitir velocidades de transmisión flexibles. Acto seguido, se comparan experimentalmente varios formatos multinivel de modulación de fase, para lograr tasas de transmisión más altas y una mejor eficiencia espectral. Posteriormente, se aborda el tema de la integración fotónica, demostrando por primera vez un transmisor (Tx) con modulación híbrida de fase y amplitud de ocho puntos, mediante el uso de un dispositivo pequeño, de bajo coste y eficiente energéticamente, como lo es el láser dual de electro-absorción modulada (DEML). Finalmente, se presentan dos propuestas novedosas para reducir la complejidad de la detección heterodina e intradina, afrontando el problema típico de la complejidad y alto coste de los sistemas coherentes. La primera explora la posibilidad de usar solo un láser DFB en la ONU, como LO y Tx. La segunda, demuestra por primera vez, una nueva técnica de diversidad fase en el tiempo, que alterna la modulación de fase en cada componente del plano complejo (fase-I y cuadratura-Q) logrando una transmisión de 10 Gb / s / λ con independencia de polarizació

Next generation optical access networks and coexistence with legacy PONs

Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmission capacities up to 2.5 Gb/s down and 1.25 Gb/s up, among multiple users. Research on high-speed electronics and Wavelength Division Multiplexing (WDM) has allowed the emergence of what is known as the second generation PON (NG-PON2), which specify aggregated capacities up to 40 Gb/s, stacking four channels at symmetric data rates of 10 Gb/s each, for residential scenarios. Nevertheless, the capacity per channel is still shared between multiple users due to the use of TDM. Moreover, the optical spectrum efficiency is low because channels are widely spaced (50 to 100 GHz). In addition, the sensitivity, reach and number of users is limited as consequence of using direct detection (DD) systems. In consequence, and due to the increase in bandwidth demands of new multimedia applications, it is necessary to propose solutions that cope with this tendency and, even more important, that can coexist with legacy systems, being one of the major requirements of network operators to guarantee a smooth and non-disruptive technology migration. In this thesis, a breakthrough technology such as Ultra-Dense WDM (UDWDM) that allows to allocate a large number of channels spaced only by a few GHz is used. This approach consent to envision the concept of Wavelength-to-the-User, where each costumer can be served with dedicated bandwidth links. The key technologies are based on coherent systems, with inherent wavelength selectivity and improved sensitivity compared to DD systems, thanks to the booster action of a tunable local oscillator (LO) laser. Because of cost is the main constraint in access networks, especially at the customer premises equipment (Optical Network Unit - ONU), in this thesis, a new class of coherent transceivers, based on low-cost direct modulated lasers and simplified receiver schemes, are proposed and experimentally tested. Moreover, the issue of coexistence is investigated through theoretical studies and real-time implementations, demonstrating full compatibility with legacy systems. Between the proposed solutions, a simple technique to adjust digitally the direct phase modulation of a distributed feedback (DFB) laser is presented to support flexible transmission rates. Next, several multilevel phase modulation formats for achieving higher transmission rates and better spectral efficiency are experimentally compared. Subsequently, the topic of photonic integration is addressed, demonstrating for the first time an 8-ary hybrid amplitude and phase modulated transmitter (Tx), by using a low-cost, small-footprint and energy efficient dual electro-absorption modulated laser (DEML). Finally, two novel proposals, to reduce the complexity of heterodyne and intradyne detection, are provided to face the typical issue of complexity and high-cost of coherent systems. The former explores the possibility of using only one DFB laser as LO and Tx at the ONU. The later demonstrates for the first time, a novel phase time diversity technique alternating phase modulation at each complex component (in-phase - I and quadrature - Q) achieving a 10 Gb/s' transmission with polarization independence.En la actualidad, la Fibra hasta el Hogar es una de las soluciones más prometedoras para proporcionar servicios de banda ancha en las redes de acceso. Sin embargo, la fibra se usa de manera poco eficiente, ya que la mayoría de los sistemas implementados todavía están basados en redes ópticas pasivas de multiplexación por división en el tiempo (TDM-PON) que brindan capacidades de transmisión compartidas entre múltiples usuarios de hasta 2.5 Gb/s y 1.25 Gb/s. La investigación en electrónica de alta velocidad y la multiplexación por división de longitud de onda (WDM) ha permitido el surgimiento de lo hoy se conoce como PON de segunda generación (NG-PON2), que especifica capacidades agregadas de hasta 40 Gb/s, apilando cuatro canales a velocidades de datos simétricas de 10 Gb/s cada uno, para escenarios residenciales. Sin embargo, la capacidad por canal todavía se comparte entre múltiples usuarios debido al uso de TDM. Además, la eficiencia en el uso del espectro óptico es baja porque los canales están muy separados (50 a 100 GHz). Asimismo, la sensibilidad, el alcance y el número de usuarios están limitados debido al uso de sistemas de detección directa. En consecuencia, y debido al aumento de las demandas de ancho de banda de las nuevas aplicaciones multimedia, es necesario proponer soluciones que respondan a esta tendencia y, lo que es más importante, que puedan coexistir con sistemas heredados, siendo uno de los principales requisitos de los operadores de red para garantizar una migración de tecnología fluida y sin interrupciones. En esta tesis, se utiliza una tecnología de vanguardia, como la multiplexación por división ultra densa de longitud de onda (UDWDM) que permite distribuir un gran número de canales espaciados solo por unos pocos GHz. Este enfoque permite vislumbrar el concepto de longitud de onda para el usuario, donde cada cliente puede usar enlaces de ancho de banda dedicados. Las tecnologías clave están basadas en los sistemas coherentes, con selectividad de longitud de onda inherente y sensibilidad mejorada en comparación con los sistemas de detección directa, gracias al efecto de amplificación óptica de un láser oscilador local (LO) sintonizable. Debido a que el costo es la principal restricción en las redes de acceso, especialmente del equipo en las instalaciones del cliente (unidad de red óptica - ONU), en ésta tesis, una nueva clase de transceptores coherentes, basados en láseres de bajo coste modulados directamente y esquemas de recepción simplificados, son propuestos y probados experimentalmente. Además, el problema de la coexistencia es investigado a través de estudios teóricos y experimentos en tiempo real, demostrando compatibilidad total con los sistemas heredados. Entre las soluciones propuestas, se presenta una técnica simple para ajustar digitalmente la modulación de fase directa de un láser de retroalimentación distribuida (DFB), y admitir velocidades de transmisión flexibles. Acto seguido, se comparan experimentalmente varios formatos multinivel de modulación de fase, para lograr tasas de transmisión más altas y una mejor eficiencia espectral. Posteriormente, se aborda el tema de la integración fotónica, demostrando por primera vez un transmisor (Tx) con modulación híbrida de fase y amplitud de ocho puntos, mediante el uso de un dispositivo pequeño, de bajo coste y eficiente energéticamente, como lo es el láser dual de electro-absorción modulada (DEML). Finalmente, se presentan dos propuestas novedosas para reducir la complejidad de la detección heterodina e intradina, afrontando el problema típico de la complejidad y alto coste de los sistemas coherentes. La primera explora la posibilidad de usar solo un láser DFB en la ONU, como LO y Tx. La segunda, demuestra por primera vez, una nueva técnica de diversidad fase en el tiempo, que alterna la modulación de fase en cada componente del plano complejo (fase-I y cuadratura-Q) logrando una transmisión de 10 Gb / s / λ con independencia de polarizaciónPostprint (published version

Opto-VLSI-based adaptive optical power splitter/combiner for next generation dynamic optical telecommunication networks

The demand for optical power splitters is growing globally, due to the rapid deployment of fibre-to-the-premises, optical metropolitan area network (MAN), and active optical cables for TV/Video signal transport. Optical splitters play an important role in passive optical network (PON) technology by enabling several hundred users to share one optical line terminal. However, current PONs, which use fixed optical power splitters, have limited reconfigurability particularly in adding/dropping users to/from an optical network unit. An adaptive optical power splitter (OPS) can dynamically reallocate the opticalpower in the entire network according to the real-time distribution of users and services, thus providing numerous advantages such as improve an optical network efficiency, scalability, and reliability. An adaptive OPS is also important for realizing self-healing ring-to-ring optical MAN, thus offering automatic communication recovery when line break occurs. In addition, future optical line protection systems will require adaptive optical splitters to switch optical signals from faulty lines to active power lines, avoid the use of optical attenuators and/or amplifiers, and achieve real time line monitoring. An adaptive OPS can also be incorporated in tunable optical dispersion compensators, optical attenuator and optical gain equalizer, and reconfigurable optical switches. This thesis proposes and demonstrates the principle of a novel Opto-VLSI-based adaptive optical splitter/combiner for next generation dynamic optical telecommunication networks. The proposed splitter structure enables an input optical power to be split adaptively into a larger number of output fibre ports, through optimized phase holograms driving the Opto-VLSI processor. The new adaptive optical splitter has additional advantages including lossless operation, adequate inter-port crosstalk, compressed hardware and simple user interface. This thesis demonstrates, in particular, the concept of an adaptive optical power splitter employing an Opto-VLSI processor and a 4-f imaging system experimentally in three stages as follow: (i) a 1×2 adaptive optical power splitter based on an Opto-VLSI processor, a fibre collimator array and 4-f imaging systems (single lens), (ii) a 1×4 adaptive optical power splitter based on an Opto-VLSI processor, a fibre array and 4-f imaging systems (single lens), and (iii) a 1×N lossless adaptive optical power splitter structure integrating an Opto-VLSI processor, optical amplifiers, a fibre array, and an array of 4-f imaging systems (lens array). The thesis also demonstrates the concept of an adaptive optical signal combiner which enables multiple signals to be combined with user-defined weight profiles into a single fibre port. Experimental results demonstrate that an input optical signal can arbitrarily be split into N signals and coupled into optical fibre ports by uploading optimized multicasting phase holograms onto the Opto-VLSI processor. They also demonstrate that N input optical signals can be dynamically combined with arbitrary weights into a single optical fibre port. Excellent agreement between theoretical and experimental results is demonstrated. The total insertion loss of the optical power splitter is only 5 dB. Results also show that the optical amplifiers can compensate for the insertion and splitting losses, thus enabling lossless splitter operation. A crosstalk level around -25 dB and a wavelength spectral range exceeding 40 nm is experimentally realized. In addition, a novel broadband adaptive RF power splitter/combiner based on Opto-VLSI processor is proposed and experimentally demonstrated. By uploading optimized multicasting phase holograms onto the software-driven Opto-VLSI processor, the input RF signal is dynamically split and directed to different output ports, with userdefined splitting ratios. Also, multiple input RF signals can be dynamically combined with arbitrary user-defined weights. As a proof-of-concept demonstration, two input RF signals are dynamically combined with different user-defined weight profiles. We also propose and demonstrate a photonic microwave filter based on the use of an Opto-VLSI-based adaptive optical combiner. The experimental results demonstrate that the developed Opto-VLSI-based adaptive optical combiner can dynamically route multiple input optical signals to a single output, with user-defined weight profiles, thus realising a tunable microwave filter. Overall this Opto-VLSI-based adaptive optical power splitter should allow as many as 32 output ports to be supported while achieving high splitting resolution and dynamic range. This will greatly enhance the efficiency of optical communication networks

Monolithic integrated reflective transceiver in indium phosphide

The work presented in this thesis is about an InP based monolithic integrated reflective transceiver meant for use in future fiber access networks at the user site. The motivation for this research results from the users’ demands for ever-increasing bandwidth at low cost of operation, administration and maintenance. We investigated solutions to these challenges with a network concept using a dynamically reconfigurable optical network topology with a wavelength router and a colorless optical network unit. This work focuses on developing the optical part of the optical network unit, a reflective transceiver. This reflective transceiver consists of three basic components: a tunable wavelength duplexer, a photodetector and a reflective modulator. The tunable wavelength duplexer separates two wavelengths, one for the downstream and one for the upstream signals, and guides them to the photodetector and the reflective modulator. The photodetector detects the downstream data. The reflective modulator modulates the light carrier with the upstream data and reflects it back to the network. The integrated transceiver was realized bymonolithically integrating these components on a common active-passive butt-joint layer stack based on InP technology. This approach not only offers high bandwidth for both downstream data and upstream data, but also lowers the cost of the device and the network operation because of the colorless operation at the user site. The main results obtained within this work are summarized as follows: an efficient and polarization insensitive tunable wavelength duplexer was realized; a new method to fabricate a reflective SOA has been proposed and demonstrated; a high performance waveguide photodetector based on SOA layer stack was successfully fabricated; a low cost photoreceiverwhich includes an InP photodetector and a SiGe amplifier was demonstrated; aworking monolithic integrated reflective transceiver based on InP was successfully realized and demonstrated; two monolithic integrated transceivers aiming for higher bandwidth have been designed and fabricated. In addition, a novel MMI reflector has been proposed and realized with high reflectivity. This work was funded by DutchMinistry of Economic Affairs through the Freeband Project Broadband Photonics Access, the Smartmix projectMemphis and the NRC Photonics

Advances in Optical Amplifiers

Optical amplifiers play a central role in all categories of fibre communications systems and networks. By compensating for the losses exerted by the transmission medium and the components through which the signals pass, they reduce the need for expensive and slow optical-electrical-optical conversion. The photonic gain media, which are normally based on glass- or semiconductor-based waveguides, can amplify many high speed wavelength division multiplexed channels simultaneously. Recent research has also concentrated on wavelength conversion, switching, demultiplexing in the time domain and other enhanced functions. Advances in Optical Amplifiers presents up to date results on amplifier performance, along with explanations of their relevance, from leading researchers in the field. Its chapters cover amplifiers based on rare earth doped fibres and waveguides, stimulated Raman scattering, nonlinear parametric processes and semiconductor media. Wavelength conversion and other enhanced signal processing functions are also considered in depth. This book is targeted at research, development and design engineers from teams in manufacturing industry, academia and telecommunications service operators

Algorithms and Subsystems for Next Generation Optical Networks

This thesis investigates algorithms and subsystems for digital coherent optical networks to alleviate system requirements and enable spectrally efficient systems. Spectral shaping of individual channel is investigated to mitigate backreflections in bi-directional Passive Optical Network (PON) enabling more than 1000 users operating at 10 Gbit/s. It is then shown that temporal delay skews, caused by misalignment in the coherent receiver, induce a large penalty for Nyquist filtered signals. An adaptive 4×4 equaliser is developed to compensate the imperfections dynamically. This is subsequently demonstrated experimentally with Polarisation Division Multiplexed (PDM) Quadrature Phase Shift Keying (QPSK) and 16-level Quadrature Amplitude Modulation (QAM). Furthermore, a modified blind equaliser is designed to adaptively compensate for unknown amount of Chromatic Dispersion (CD). The equaliser is demonstrated experimentally using 10.7 GBd PDM-QPSK transmission over 5,200 km. To simplify the computational complexity of the equalisers a multiplier free update scheme is explored in simulations. Optical frequency combs are investigated as phase and frequency synchronised sub- carrier sources for Dense Wavelength Division Multiplexing (DWDM) systems. The effect of phase synchronisation between sub-channels of a superchannel is examined in simulations without showing performance deviation when no additional optical or digital processing is applied. Afterwards, the transmission performance of two generation techniques implementing 400 Gbit/s superchannels, utilising PDM-16QAM, is evaluated. Although, the average performance of the two combs is identical subchannel fluctuations are observed due to uneven spectral profile. Carrier Phase Estimation (CPE) is explored for both single channel and superchannels systems. An equaliser interleaved with CPE, is explored for PDM-64QAM with minor improvement. Alternatively, Digital Coherence Enhancement (DCE) allowed the detection of 6 GBd PDM-64QAM with a 1.4 MHz linewidth laser, an order of magnitude improvement in linewidth tolerance. Finally, a joint CPE across a comb superchannel is demonstrated with a factor of 5 tolerance improvement