49 research outputs found

    Improved voltage control for the electric vehicle operation in V2H mode as an off-line UPS in the context of smart homes

    Get PDF
    As a contribution for sustainability, electric vehicles (EVs) are seen as one of the most effective influences in the transport sector. This paper proposes an improved voltage control of the EV operating as uninterruptible power supply (UPS) in smart homes. With the EV plugged-in into the smart home, it can act as an off-line UPS protecting the electrical appliances from power grid outages. The foremost advantages of the proposed voltage control strategy are comprehensively emphasized, establishing a comparison with the classical approach. Aiming to offer a sinusoidal voltage for linear and nonlinear electrical appliances, a pulse width modulation with a multi-loop control scheme is used. A Kalman filter is used for decreasing significantly the time of detecting power outages and, consequently, the transition for the UPS mode. The computer simulations and the acquired experimental results validate the proposed strategy in different conditions of operation.This work has been supported by FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2019. This work has been supported by the FCT Project newERA4GRIDs PTDC/EEI-EEE/30283/2017, and by the FCT Project DAIPESEV PTDC/EEI-EEE/30382/2017. Tiago Sousa is supported by the doctoral scholarship SFRH/BD/134353/2017 granted by FCT

    Improved voltage control of the electric vehicle operating as UPS in smart homes

    Get PDF
    As a contribution for sustainability, electric vehicles (EVs) are seen as one of the most effective influences in the transport sector. As complement to the challenges that entails the EVs integration into the grid considering the bidirectional operation (grid-to-vehicle and vehicle-to-grid), there are new concepts associated with the EV operation integrating various benefits for smart homes. In this sense, this paper proposes an improved voltage control of the EV operating as uninterruptible power supply (UPS) in smart homes. With the EV plugged-in into the smart home, it can act as an off-line UPS protecting the electrical appliances from power grid outages. Throughout the paper, the foremost advantages of the proposed voltage control strategy are comprehensively emphasized, establishing a comparison with the classical approach. Aiming to offer a sinusoidal voltage for linear and nonlinear electrical appliances, a pulse-width modulation with a multi-loop control scheme is used. A Kalman filter is used for decreasing significantly the time of detecting power outages and, consequently, the transition for the UPS mode. The experimental validation was executed with a bidirectional charger containing a double stage power conversion (an ac-dc interfacing the grid-side and a dc-dc interfacing the batteries- side) and a digital stage. The computer simulations and the acquired experimental results validate the proposed strategy in different conditions of operation.This work has been supported by COMPETE: POCI-01-0145-FEDER-007043 and FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2013. This work is financed by the ERDF – European Regional Development Fund through the Operational Programme for Competitiveness and Internationalisation – COMPETE 2020 Programme, and by National Funds through the Portuguese funding agency, FCT – Fundação para a Ciência e a Tecnologia, within project SAICTPAC/0004/2015 – POCI – 01–0145–FEDER–016434. This work is part of the FCT project 0302836 NORTE-01-0145-FEDER-030283.info:eu-repo/semantics/publishedVersio

    Operation modes for the electric vehicle in smart grids and smart homes: present and proposed modes

    Get PDF
    This paper presents the main operation modes for an electric vehicle (EV) battery charger framed in smart grids and smart homes, i.e., are discussed the present-day and are proposed new operation modes that can represent an asset towards EV adoption. Besides the well-known grid to vehicle (G2V) and vehicle to grid (V2G), this paper proposes two new operation modes: Home-to-vehicle (H2V), where the EV battery charger current is controlled according to the current consumption of the electrical appliances of the home (this operation mode is combined with the G2V and V2G); Vehicle-for-grid (V4G), where the EV battery charger is used for compensating current harmonics or reactive power, simultaneously with the G2V and V2G operation modes. The vehicle-to-home (V2H) operation mode, where the EV can operate as a power source in isolated systems or as an off-line uninterruptible power supply to feed priority appliances of the home during power outages of the electrical grid is presented in this paper framed with the other operation modes. These five operation modes were validated through experimental results using a developed 3.6 kW bidirectional EV battery charger prototype, which was specially designed for these operation modes. The paper describes the developed EV battery charger prototype, detailing the power theory and the voltage and current control strategies used in the control system. The paper presents experimental results for the various operation modes, both in steady-state and during transients

    Improved vehicle-to-home (iV2H) operation mode: experimental analysis of the electric vehicle as off-line UPS

    Get PDF
    This paper presents experimental results of electric vehicle (EV) operation as an off-line uninterruptible power supply (UPS). Besides the traditional grid-to-vehicle and vehicle-to-grid modes, this paper presents an improved vehicle-to-home operation mode. This new operation mode consists of the detection of a power outage in the power grid and the change of the EV battery charger control to operate as an off-line UPS. When the power grid voltage is restored, the voltage produced by the on-board EV battery charger is slowly synchronized with the power grid voltage before a complete transition to the normal mode. This paper presents results of two algorithms to detect a power outage: the root mean square (rms) calculation method based on half-cycle of the power grid voltage, and the rms estimation based on a Kalman filter. The experimental results were obtained in steady and transient state considering two cases with the EV plugged in at home:when charging the batteries and without charging the batteries. This paper describes the EV battery charger, the power outage detection methods, and the voltage and current control strategies.- This work was supported by the Fundacao para a Ciencia e Tecnologia (FCT) in the scope of the projects under Grant PEst-UID/CEC/00319/2013. The work of V. Monteiro was supported by the Doctoral Scholarship through the Portuguese FCT Agency under Grant SFRH/BD/80155/2011. The work of B. Exposto was supported by the Doctoral Scholarship through the Portuguese FCT Agency under Grant SFRH/BD/87999/2012.info:eu-repo/semantics/publishedVersio

    Unified power converters for battery charging and traction drive systems for electric vehicles: cost and performance analysis

    Get PDF
    Electric vehicles (EVs) are a promising solution to mitigate the emission of greenhouse gases and atmospheric pollution. Although EVs existence spans from more than one century, only in the recent years there has been a considerable development in the electric mobility paradigm. This development is also verified in the operation modes for the EV, giving it an important role in smart grids. Moreover, the implementation of unified power converters for battery charging and traction drive systems is also a key topic about EVs, allowing at the same time a hardware reduction and an increasing in its functionalities. However, no economic studies about the practical feasibility of these unified systems for EVs have been reported in the literature. In this context, this paper presents a cost assessment of unified battery charging and traction drive systems for EVs focusing on practical aspects. An economic comparison is performed between a traditional EV and a unified system in order to attain a cost/performance analysis for the unified power converters that can be used in EVs.This work has been supported by FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2019. This work has been supported by FCT within the Project Scope DAIPESEV – Development of Advanced Integrated Power Electronic Systems for Electric Vehicles: PTDC/EEI-EEE/30382/2017. This work is part of the FCT project 0302836 NORTE-01-0145-FEDER-030283. Mr. Tiago Sousa is supported by the doctoral scholarship SFRH/BD/134353/2017 granted by the Portuguese FCT agency

    The role of off-board EV battery chargers in smart homes and smart grids: operation with renewables and energy storage systems

    Get PDF
    Concerns about climate changes and environmental air pollution are leading to the adoption of new technologies for transportation, mainly based on vehicle electrification and the interaction with smart grids, and also with the introduction of renewable energy sources (RES) accompanied by energy storage systems (ESS). For these three fundamental pillars, new power electronics technologies are emerging to transform the electrical power grid, targeting a flexible and collaborative operation. As a distinctive factor, the vehicle electrification has stimulated the presence of new technologies in terms of power management, both for smart homes and smart grids. As the title indicates, this book chapter focuses on the role of off-board EV battery chargers in terms of operation modes and contextualization for smart homes and smart grids in terms of opportunities. Based on a review of on-board and off-board EV battery charging systems (EV-BCS), this chapter focus on the off-board EV-BCS framed with RES and ESS as a dominant system in future smart homes. Contextualizing these aspects, three distinct cases are considered: (1) An ac smart home using separate power converters, according to the considered technologies; (2) A hybrid ac and dc smart home with an off-board EV-BCS interfacing RES and ESS, and with the electrical appliances plugged-in to the ac power grid; (3) A dc smart home using a unified 2 off-board EV-BCS with a single interface for the electrical power grid, and with multiple dc interfaces (RES, ESS, and electrical appliances). The results for each case are obtained in terms of efficiency and power quality, demonstrating that the off-board EV-BCS, as a unified structure for smart homes, presents better results. Besides, the off-board EV-BCS can also be used as an important asset for the smart grid, even when the EV is not plugged-in at the smart home.(undefined

    New opportunities and perspectives for the electric vehicle operation in smart grids and smart homes scenarios

    Get PDF
    New perspectives for the electric vehicle (EV) operation in smart grids and smart homes context are presented. Nowadays, plugged-in EVs are equipped with on-board battery chargers just to perform the charging process from the electrical power grid (G2V – grid-to-vehicle mode). Although this is the main goal of such battery chargers, maintaining the main hardware structure and changing the digital control algorithm, the on-board battery chargers can also be used to perform additional operation modes. Such operation modes are related with returning energy from the batteries to the power grid (V2G- vehicle-to-grid mode), constraints of the electrical installation where the EV is plugged-in (iG2V – improved grid-tovehicle mode), interface of renewables, and contributions to improve the power quality in the electrical installation. Besides the contributions of the EV to reduce oil consumption and greenhouse gas emissions associated to the transportation sector, through these additional operation modes, the EV also represents an important contribution for the smart grids and smart homes paradigms. Experimental results introducing the EV through the aforementioned interfaces and operation modes are presented. An on-board EV battery charger prototype was used connected to the power grid for a maximum power of 3.6 kW.This work has been supported by COMPETE: POCI-01-0145-FEDER-007043 and FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2013. This work is financed by the ERDF – European Regional Development Fund through the Operational Programme for Competitiveness and Internationalisation Ǧ COMPETE 2020 Programme, and by National Funds through the Portuguese funding agency, FCT - Fundação para a Ciência e a Tecnologia, within project SAICTPAC/0004/2015- POCI- 01-0145-FEDER-016434.info:eu-repo/semantics/publishedVersio

    Unified traction and battery charging systems for electric vehicles: a sustainability perspective

    Get PDF
    This paper presents an analysis of unified traction and battery charging systems for electric vehicles (EVs), both in terms of operation modes and in terms of implementation cost, when compared to dedicated solutions that perform the same operation modes. Regarding the connection of the EV battery charging system with the power grid, four operation modes are analyzed: (1) Grid–to–Vehicle (G2V); (2) Vehicle–to–Grid (V2G); (3) Vehicle–to–Home (V2H); and (4) Vehicle–for–Grid (V4G). With an EV unified system, each of these operation modes can be used in single–phase and three–phase power grids. Furthermore, a cost estimation is performed for an EV unified system and for dedicated systems that can perform the same functionalities, in order to prove the benefits of the EV unified approach. The cost estimation comprises two power levels, namely 6 kW, single–phase, related to domestic installations, and 50 kW, three–phase, related to industrial installations. The relevance of unified traction and battery charging systems for EVs is proven for single–phase and three–phase power grids.This work has been supported by FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2019. This work has been supported by the FCT Project DAIPESEV PTDC/EEI-EEE/30382/2017, and by the FCT Project new ERA4GRIDs PTDC/EEI-EEE/30283/2017

    New Perspectives for Vehicle-to-Vehicle (V2V) Power Transfer

    Get PDF
    This paper presents a comparison between different possibilities for the vehicle-to-vehicle (V2V) power transfer between two electric vehicles (EVs). The traditional V2V operation mode is performed through a common energy aggregator, such as the electrical power grid, consisting of a combination of the vehicle-to-grid (V2G) and grid-to-vehicle (G2V) operation modes. The traditional V2V power transfer is based on four power conversions, since each on-board EV battery charger is comprised by two power converters (dc-dc and dc-ac). In this context, this paper proposes new perspectives for the V2V power transfer, both in ac and dc, focusing in the V2V power transfer using dc power (dcV2V). The proposed methods discard the need for an energy aggregator connection, being possible to directly connect two EVs, charging one EV from the other. Furthermore, the proposed dcV2V method allows the reduction of four power conversions to a single one, allowing to increase the overall efficiency of the power transfer between EVs, An efficiency-based evaluation of the different V2V methods is performed, supporting the benefits of dcV2V.This work has been supported by COMPETE: POCI-01-0145–FEDER–007043 and FCT –Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2013. This work is financed by the ERDF – European Regional Development Fund through the Operational Programme for Competitiveness and Internationalisation –COMPETE 2020 Programme, and by National Funds through the Portuguese funding agency, FCT –Fundação para a Ciência e a Tecnologia, within project SAICTPAC/0004/2015 –POCI –01–0145–FEDER–016434.Mr. Tiago Sousa is supported by the doctoral scholarship SFRH/BD/134353/2017 granted by the Portuguese FCT agency

    Vehicle electrification: technologies, challenges and a global perspective for smart grids

    Get PDF
    Nowadays, due to economic and climate concerns, the private transportation sector is shifting for the vehicle electrification, mainly supported by electric and hybrid plug-in vehicles. For this new reality, new challenges about operation modes are emerging, demanding a cooperative and dynamic operation with the electrical power grid, guaranteeing a stable integration without omitting the power quality for the grid-side and for the vehicle-side. Besides the operation modes, new attractive and complementary technologies are offered by the vehicle electrification in the context of smart grids, which are valid for both on-board and off-board systems. In this perspective, this book chapter presents a global perspective and deals with challenges for the vehicle electrification, covering the key technologies toward a sustainable future. Among others, the flowing topics are covered: (1) Overview of power electronics structures for battery charging systems, including on-board and off-board systems; (2) State-of-the-art of communication technologies for application in the context of vehicular electrification, smart grids and smart homes; (3) Challenges and opportunities concerning wireless power transfer with bidirectional interface to the electrical grid; (4) Future perspectives about bidirectional power transfer between electric vehicles (vehicle-to-vehicle operation mode); (5) Unified technologies, allowing to combine functionalities of a bidirectional interface with the electrical grid and motor driver based on a single system; and (6) Smart grids and smart homes scenarios and accessible opportunities about operation modes.Fundação para a Ciência e Tecnologia (FCT
    corecore